Difference between revisions of "RFC3020"

From RFC-Wiki
imported>Admin
(Created page with " Network Working Group P. Pate Request for Comments: 3020 B. Lynch Category: Standards Tra...")
 
Line 1: Line 1:
−
 
−
 
−
 
−
 
−
 
−
 
 
Network Working Group                                            P. Pate
 
Network Working Group                                            P. Pate
 
Request for Comments: 3020                                      B. Lynch
 
Request for Comments: 3020                                      B. Lynch
Line 11: Line 5:
 
                                                 Megisto Systems, Inc.
 
                                                 Megisto Systems, Inc.
 
                                                         December 2000
 
                                                         December 2000
−
 
  
 
                   Definitions of Managed Objects
 
                   Definitions of Managed Objects
Line 35: Line 28:
 
in Frame Relay Forum FRF.16.  This MIB also includes conformance and
 
in Frame Relay Forum FRF.16.  This MIB also includes conformance and
 
notification information.
 
notification information.
 +
 +
Table of Contents
 +
 +
1 The SNMP Management Framework ................................    2
 +
2 Overview .....................................................    3
 +
2.1 Multilink Frame Relay Background ...........................    3
 +
2.1.1 Terminology ..............................................    4
 +
2.1.2 Reference Model ..........................................    5
 +
2.2 Structure of the MIB .......................................    5
 +
2.2.1 mfrBundleMaxNumBundles ...................................    6
 +
2.2.2 mfrBundleNextIndex .......................................    6
 +
2.2.3 mfrBundleTable ...........................................    6
 +
2.2.4 Bundle-to-ifIndex Mapping Table ..........................    6
 +
2.2.5 mfrBundleLinkTable .......................................    6
 +
2.3 Relationship With Other MIBS and Tables ....................    7
 +
2.3.1 Relationship With Interface Table ........................    7
 +
2.3.1.1 Bundle Links ...........................................    7
 +
2.3.1.2 Bundles ................................................    7
 +
 +
2.3.1.3 Mapping Between ifIndex and mfrBundleIndex .............    8
 +
2.3.1.4 ifTable Objects ........................................    8
 +
2.3.2 Relationship With Interface Stack Table ..................    9
 +
2.3.3 Relationship With Frame Relay DTE MIB ....................    9
 +
2.3.4 Relationship With Frame Relay Service MIB ................    9
 +
2.3.5 Example ..................................................    9
 +
2.4 Creation Of Bundles and Bundle Links .......................  11
 +
2.4.1 Creation Of Bundles ......................................  11
 +
2.4.2 Creation Of Bundle Links .................................  11
 +
2.5 Notifications ..............................................  11
 +
2.5.1 Bundle ...................................................  11
 +
2.5.1.1 linkUp .................................................  12
 +
2.5.1.2 linkDown ...............................................  12
 +
2.5.2 Bundle Link ..............................................  12
 +
2.5.2.1 linkUp .................................................  12
 +
2.5.2.2 linkDown ...............................................  12
 +
2.5.2.3 mfrMibTrapBundleLinkMismatch ...........................  12
 +
3 Object Definitions ...........................................  13
 +
4 Acknowledgments ..............................................  32
 +
5 References ...................................................  32
 +
6 Security Considerations ......................................  34
 +
7 Authors' Addresses ...........................................  35
 +
8 Full Copyright Statement .....................................  36
  
 
== The SNMP Management Framework ==
 
== The SNMP Management Framework ==
Line 41: Line 76:
 
components:
 
components:
  
−
o  An overall architecture, described in [[RFC2571|RFC 2571]] [RFC2571].
+
o  An overall architecture, described in RFC 2571 [RFC2571].
  
 
o  Mechanisms for describing and naming objects and events for the
 
o  Mechanisms for describing and naming objects and events for the
 
   purpose of management.  The first version of this Structure of
 
   purpose of management.  The first version of this Structure of
 
   Management Information (SMI) is called SMIv1 and described in STD
 
   Management Information (SMI) is called SMIv1 and described in STD
−
   16, [[RFC1155|RFC 1155]] [RFC1155], STD 16, [[RFC1212|RFC 1212]] [RFC1212] and [[RFC1215|RFC 1215]]
+
   16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC 1215
 
   [RFC1215].  The second version, called SMIv2, is described in STD
 
   [RFC1215].  The second version, called SMIv2, is described in STD
−
   58: [[RFC2578|RFC 2578]] [RFC2578], [[RFC2579|RFC 2579]] [RFC2579] and [[RFC2580|RFC 2580]] [RFC2580].
+
   58: RFC 2578 [RFC2578], RFC 2579 [RFC2579] and RFC 2580 [RFC2580].
  
 
o  Message protocols for transferring management information.  The
 
o  Message protocols for transferring management information.  The
 
   first version of the SNMP message protocol is called SNMPv1 and
 
   first version of the SNMP message protocol is called SNMPv1 and
−
   described in STD 15, [[RFC1157|RFC 1157]] [RFC1157].  A second version of the
+
   described in STD 15, RFC 1157 [RFC1157].  A second version of the
 
   SNMP message protocol, which is not an Internet standards track
 
   SNMP message protocol, which is not an Internet standards track
−
   protocol, is called SNMPv2c and described in [[RFC1901|RFC 1901]] [RFC1901]
+
   protocol, is called SNMPv2c and described in RFC 1901 [RFC1901]
−
   and [[RFC1906|RFC 1906]] [RFC1906].  The third version of the message protocol
+
   and RFC 1906 [RFC1906].  The third version of the message protocol
−
   is called SNMPv3 and described in [[RFC1906|RFC 1906]] [RFC1906], [[RFC2572|RFC 2572]]
+
   is called SNMPv3 and described in RFC 1906 [RFC1906], RFC 2572
−
   [RFC2572] and [[RFC2574|RFC 2574]] [RFC2574].
+
   [RFC2572] and RFC 2574 [RFC2574].
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
  
 
o  Protocol operations for accessing management information.  The
 
o  Protocol operations for accessing management information.  The
 
   first set of protocol operations and associated PDU formats is
 
   first set of protocol operations and associated PDU formats is
−
   described in STD 15, [[RFC1157|RFC 1157]] [RFC1157].  A second set of protocol
+
   described in STD 15, RFC 1157 [RFC1157].  A second set of protocol
−
   operations and associated PDU formats is described in [[RFC1905|RFC 1905]]
+
   operations and associated PDU formats is described in RFC 1905
 
   [RFC1905].
 
   [RFC1905].
  
−
o  A set of fundamental applications described in [[RFC2573|RFC 2573]] [RFC2573]
+
o  A set of fundamental applications described in RFC 2573 [RFC2573]
−
   and the view-based access control mechanism described in [[RFC2575|RFC 2575]]
+
   and the view-based access control mechanism described in RFC 2575
 
   [RFC2575].
 
   [RFC2575].
  
 
A more detailed introduction to the current SNMP Management Framework
 
A more detailed introduction to the current SNMP Management Framework
−
can be found in [[RFC2570|RFC 2570]] [RFC2570].
+
can be found in RFC 2570 [RFC2570].
  
 
Managed objects are accessed via a virtual information store, termed
 
Managed objects are accessed via a virtual information store, termed
Line 109: Line 138:
 
This service provides a frame-based inverse multiplexing function,
 
This service provides a frame-based inverse multiplexing function,
 
sometimes referred to as an "IMUX".
 
sometimes referred to as an "IMUX".
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
  
 
The bundle provides the same order-preserving service as a physical
 
The bundle provides the same order-preserving service as a physical
Line 138: Line 159:
 
                     one of the bundle's physical links.
 
                     one of the bundle's physical links.
  
 +
==== Reference Model ====
  
 +
+--------------------------+              +--------------------------+
 +
|  Switching Layer -OR-  |              |  Switching Layer -OR-  |
 +
| Higher-Level Applications|              | Higher-Level Applications|
 +
+--------------------------+              +--------------------------+
 +
|          |C-Plane - Q.933|              |          |C-Plane - Q.933|
 +
| U-Plane  |    (Note 1)  |              | U-Plane  |    (Note 1)  |
 +
| (Note 3) |---------------|              | (Note 3) |---------------|
 +
|          |Q.922 (Note 2) |              |          |Q.922 (Note 2) |
 +
+--------------------------+              +--------------------------+
 +
| Data Link Layer (Q.922)  |              | Data Link Layer (Q.922)  |
 +
+--------------------------+              +--------------------------+
 +
|      Bundle (B)        |              |      Bundle (B)        |
 +
+--------------------------+              +--------------------------+
 +
| Bundle | Bundle | Bundle |              | Bundle | Bundle | Bundle |
 +
|  Link  |  Link  |  Link  |              |  Link  |  Link  |  Link  |
 +
|  (BL)  |  (BL)  |  (BL)  |              |  (BL)  |  (BL)  |  (BL)  |
 +
+--------+--------+--------+              +--------+--------+--------+
 +
|Physical|Physical|Physical|              |Physical|Physical|Physical|
 +
|  (PH)  |  (PH)  |  (PH)  |  __________  |  (PH)  |  (PH)  |  (PH)  |
 +
+----+---+----+---+----+---+ /\          \ +----+---+----+---+----+---+
 +
  |        |        |    /  \          \      |        |        |
 +
  |        |        +--------\          \-----+        |        |
 +
  |        |          /      \          \            |        |
 +
  |        +-------------------\          \------------+        |
 +
  |          _________\_______/  Bundle  /_                    |
 +
  |          /\              /          /  \                  |
 +
  +------------| Bundle Link /          /    |------------------+
 +
            \/_____________/          /____/
 +
                          \/__________/
  
 +
                Figure 1: MFR Reference Diagram
  
 +
Note 1: C-Plane operation as described in Q.933 [Q.933] and FRF.4
 +
[FRF.4]
  
 +
Note 2: Multiple frame acknowledged information transfer mode as
 +
described in Q.922 [Q.922]
  
 +
Note 3: Core aspects for use with frame relay bearer service as
 +
described in Q.922, Annex A [Q.922]
  
 +
=== Structure of the MIB ===
  
 +
The UNI/NNI MFR managed objects consist of two scalar objects and
 +
three tables.
  
 +
==== mfrBundleMaxNumBundles ====
  
 +
This scalar is used to inform the manager of the maximum number of
 +
bundles supported by this device.
  
 +
==== mfrBundleNextIndex ====
  
 +
This scalar is used to assist the manager in selecting a value for
 +
mfrBundleIndex during row creation.  It can also be used to avoid
 +
race conditions with multiple managers trying to create rows in the
 +
table (see RFC 2494 [RFC2494] for one such algorithm).
  
 +
==== mfrBundleTable ====
  
 +
This table provides a means to configure and monitor bundles.  It is
 +
indexed by mfrBundleIndex and contains these columns:
  
 +
  -  mfrBundleIndex                    Integer32
 +
  -  mfrBundleIfIndex                  InterfaceIndex
 +
  -  mfrBundleRowStatus                RowStatus
 +
  -  mfrBundleNearEndName              SnmpAdminString
 +
  -  mfrBundleFragmentation            INTEGER
 +
  -  mfrBundleMaxFragSize              Integer32
 +
  -  mfrBundleTimerHello              INTEGER
 +
  -  mfrBundleTimerAck                INTEGER
 +
  -  mfrBundleCountMaxRetry            INTEGER
 +
  -  mfrBundleActivationClass          INTEGER
 +
  -  mfrBundleThreshold                Integer32
 +
  -  mfrBundleMaxDiffDelay            Integer32
 +
  -  mfrBundleSeqNumSize              INTEGER
 +
  -  mfrBundleLinksConfigured          Integer32
 +
  -  mfrBundleLinksActive              Integer32
 +
  -  mfrBundleBandwidth                Integer32
 +
  -  mfrBundleFarEndName              SnmpAdminString
 +
  -  mfrBundleResequencingErrors      Counter32
  
 +
==== Bundle-to-ifIndex Mapping Table ====
  
 +
This table provides a means to take an ifIndex and find the
 +
corresponding mfrBundleIndex.  It is indexed by ifIndex and contains
 +
these columns:
  
 +
  -  mfrBundleIfIndexMapping          Integer32
  
 +
==== mfrBundleLinkTable ====
  
 +
This table provides a means to configure and monitor bundle links.
 +
It is indexed by ifIndex and contains these columns:
  
 +
  -  mfrBundleLinkRowStatus            RowStatus
 +
  -  mfrBundleLinkConfigBundleIndex    Integer32
 +
  -  mfrBundleLinkNearEndName          SnmpAdminString
 +
  -  mfrBundleLinkState                MfrBundleLinkState
 +
  -  mfrBundleLinkFarEndName            SnmpAdminString
 +
  -  mfrBundleLinkFarEndBundleName      SnmpAdminString
 +
  -  mfrBundleLinkDelay                Integer32
 +
  -  mfrBundleLinkFramesControlTx      Counter32
 +
  -  mfrBundleLinkFramesControlRx      Counter32
 +
  -  mfrBundleLinkFramesControlInvalid  Counter32
 +
  -  mfrBundleLinkTimerExpiredCount    Counter32
 +
  -  mfrBundleLinkLoopbackSuspected    Counter32
 +
  -  mfrBundleLinkUnexpectedSequence    Counter32
 +
  -  mfrBundleLinkMismatch              Counter32
 +
 +
=== Relationship With Other MIBS and Tables ===
  
 +
==== Relationship With Interface Table ====
  
 +
===== Bundle Links =====
  
 +
Each bundle link will appear as an interface in the ifTable.  The
 +
ifIndex that appears in the ifTable is used for indexing the bundle
 +
link tables in the UNI-NNI MFR MIB.
  
 +
===== Bundles =====
  
 +
Each bundle will appear as an interface in the ifTable.  There will
 +
be corresponding mfrBundleIndex which may be different than the
 +
ifIndex of the bundle.
  
 +
The reason is best summarized in RFC 2494 [RFC2494], which describes
 +
frame relay bundle of DS0.  It says:
  
 +
  This table is not indexed by ifIndex because the manager has to
 +
  choose the index in a createable row and the agent must be allowed
 +
  to select ifIndex values.
  
 +
The rows in the ifEntry table are not createable as they do not have
 +
row status.  RFC 2863 [RFC2863] suggests that the ifIndex should be
 +
chosen by the agent.  Here is its statement regarding row creation
 +
and deletion:
  
 +
  While some interfaces, for example, most physical interfaces,
 +
  cannot be created via network management, other interfaces such as
 +
  logical interfaces sometimes can be.  The ifTable contains only
 +
  generic information about an interface.  Almost all 'create-able'
 +
  interfaces have other, media-specific, information through which
  
 +
  configuration parameters may be supplied prior to creating such an
 +
  interface.  Thus, the ifTable does not itself support the creation
 +
  or deletion of an interface (specifically, it has no RowStatus
 +
  column).  Rather, if a particular interface type supports the
 +
  dynamic creation and/or deletion of an interface of that type,
 +
  then that media-specific MIB should include an appropriate
 +
  RowStatus object (see the ATM LAN-Emulation Client MIB [ATMLANE]
 +
  for an example of a MIB which does this).  Typically, when such a
 +
  RowStatus object is created/deleted, then the conceptual row in
 +
  the ifTable appears/disappears as a by-product, and an ifIndex
 +
  value (chosen by the agent) is stored in an appropriate object in
 +
  the media-specific MIB.
  
 +
The ATM LAN-Emulation Client MIB [ATMLANE] uses different indices and
 +
so does the IMA MIB [ATMIMA].  Looking at the examples we have, and
 +
the statements from RFC, it seems better to have two indices.  This
 +
gives the SNMP agent implementor the freedom to manage their ifIndex
 +
in the way they like.
  
 +
===== Mapping Between ifIndex and mfrBundleIndex =====
  
−
==== Reference Model ====
+
The mfrBundleIfIndexMappingTable is indexed by ifIndex and provides
−
 
+
the means to map a given ifIndex into the corresponding
−
+--------------------------+              +--------------------------+
+
mfrBundleIndex.  The mfrBundleIfIndexMapping object in the
−
|  Switching Layer -OR-  |              |  Switching Layer -OR-  |
+
mfrBundleTable (indexed by mfrBundleIndex) provides the reverse
−
| Higher-Level Applications|              | Higher-Level Applications|
+
mapping of a mfrBundleIndex to the corresponding ifIndex in the
−
+--------------------------+              +--------------------------+
+
ifTable.
−
|          |C-Plane - Q.933|              |          |C-Plane - Q.933|
 
−
| U-Plane |    (Note 1)  |              | U-Plane  |    (Note 1)  |
 
−
| (Note 3) |---------------|              | (Note 3) |---------------|
 
−
|          |Q.922 (Note 2) |              |          |Q.922 (Note 2) |
 
−
+--------------------------+              +--------------------------+
 
−
| Data Link Layer (Q.922)  |              | Data Link Layer (Q.922)  |
 
−
+--------------------------+              +--------------------------+
 
−
|      Bundle (B)        |              |      Bundle (B)        |
 
−
+--------------------------+              +--------------------------+
 
−
| Bundle | Bundle | Bundle |              | Bundle | Bundle | Bundle |
 
−
|  Link  |  Link  |  Link  |              |  Link  |  Link  |  Link  |
 
−
|  (BL)  |  (BL)  |  (BL)  |              |  (BL)  |  (BL)  |  (BL)  |
 
−
+--------+--------+--------+              +--------+--------+--------+
 
−
|Physical|Physical|Physical|              |Physical|Physical|Physical|
 
−
|  (PH)  |  (PH)  |  (PH)  |  __________  |  (PH)  |  (PH)  |  (PH) |
 
−
+----+---+----+---+----+---+ /\          \ +----+---+----+---+----+---+
 
−
  |        |        |    /  \          \      |        |        |
 
−
  |        |        +--------\          \-----+        |        |
 
−
  |        |          /      \          \            |        |
 
−
  |        +-------------------\          \------------+        |
 
−
  |          _________\_______/  Bundle  /_                    |
 
−
  |          /\              /          /  \                  |
 
−
  +------------| Bundle Link /          /    |------------------+
 
−
            \/_____________/          /____/
 
−
                          \/__________/
 
−
 
 
−
                Figure 1: MFR Reference Diagram
 
−
 
 
−
 
 
−
Note 1: C-Plane operation as described in Q.933 [Q.933] and FRF.4
 
−
[FRF.4]
 
−
 
 
−
Note 2: Multiple frame acknowledged information transfer mode as
 
−
described in Q.922 [Q.922]
 
−
 
 
−
Note 3: Core aspects for use with frame relay bearer service as
 
−
described in Q.922, Annex A [Q.922]
 
−
 
 
−
=== Structure of the MIB ===
 
−
 
 
−
The UNI/NNI MFR managed objects consist of two scalar objects and
 
−
three tables.
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
==== mfrBundleMaxNumBundles ====
 
−
 
 
−
This scalar is used to inform the manager of the maximum number of
 
−
bundles supported by this device.
 
  
−
==== mfrBundleNextIndex ====
+
===== ifTable Objects =====
  
−
This scalar is used to assist the manager in selecting a value for
+
The bundle configuration and status table.  There is a one-to-one
−
mfrBundleIndex during row creation. It can also be used to avoid
+
correspondence between a bundle and an interface represented in the
−
race conditions with multiple managers trying to create rows in the
+
ifTable.
−
table (see [[RFC2494|RFC 2494]] [RFC2494] for one such algorithm).
+
 
 +
The following objects of the ifTable have specific meaning for an MFR
 +
bundle:
  
−
==== mfrBundleTable ====
+
  ifAdminStatus  -  the bundle admin status
 +
  ifOperStatus  -  the bundle operational status
 +
  ifSpeed        -  the current bandwidth of the bundle
 +
  ifInUcastPkts  -  the number of frames received on the bundle
 +
  ifOutUcastPkts -  the number of frames transmitted on the bundle
 +
  ifInErrors    -  frame (not fragment) errors
 +
  ifOutErrors    -  frame (not fragment) errors
  
−
This table provides a means to configure and monitor bundles.  It is
+
The following objects of the ifTable have specific meaning for an MFR
−
indexed by mfrBundleIndex and contains these columns:
+
bundle link:
  
−
   -  mfrBundleIndex                    Integer32
+
   ifAdminStatus -  the bundle link admin status
−
  -  mfrBundleIfIndex                  InterfaceIndex
+
   ifOperStatus  -  the bundle link operational status
−
  -  mfrBundleRowStatus                RowStatus
+
   ifSpeed        -  the bandwidth of the bundle link interface
−
  -  mfrBundleNearEndName              SnmpAdminString
+
   ifInUcastPkts -  the number of frames received on the bundle link
−
  -  mfrBundleFragmentation            INTEGER
+
   ifOutUcastPkts -  the number of frames transmitted on the bundle
−
  -  mfrBundleMaxFragSize              Integer32
+
                    link
−
  - mfrBundleTimerHello              INTEGER
+
   ifInErrors    -  frame and fragment errors
−
  -  mfrBundleTimerAck                INTEGER
+
   ifOutErrors   -  frame and fragment errors
−
  -  mfrBundleCountMaxRetry            INTEGER
 
−
   -  mfrBundleActivationClass          INTEGER
 
−
   -  mfrBundleThreshold                Integer32
 
−
   - mfrBundleMaxDiffDelay            Integer32
 
−
  -  mfrBundleSeqNumSize              INTEGER
 
−
   -  mfrBundleLinksConfigured          Integer32
 
−
  -  mfrBundleLinksActive              Integer32
 
−
   -  mfrBundleBandwidth                Integer32
 
−
   -  mfrBundleFarEndName              SnmpAdminString
 
−
   -  mfrBundleResequencingErrors      Counter32
 
  
−
==== Bundle-to-ifIndex Mapping Table ====
+
==== Relationship With Interface Stack Table ====
  
−
This table provides a means to take an ifIndex and find the
+
The bundles and bundle links will appear in the ifStackTable defined
−
corresponding mfrBundleIndex.  It is indexed by ifIndex and contains
+
in RFC 2863 [RFC2863].  Each bundle link will appear a lower layer to
−
these columns:
+
its owner bundle.  The bundle will appear as a higher layer to the
 +
bundle links and as a lower layer to a frame relay service or UNI.
  
−
  -  mfrBundleIfIndexMapping          Integer32
+
==== Relationship With Frame Relay DTE MIB ====
  
−
==== mfrBundleLinkTable ====
+
The bundle will have a one-to-one correspondence with a DLCMI or UNI
 +
that appear in the DTE MIB tables [RFC2115].
  
−
This table provides a means to configure and monitor bundle links.
+
==== Relationship With Frame Relay Service MIB ====
−
It is indexed by ifIndex and contains these columns:
 
  
 +
There is a one-to-one relationship between the MFR bundle and the
 +
frame relay service logical port defined in RFC1604 [RFC1604].
  
 +
==== Example ====
  
 +
Figure two shows an example of how the various tables are related.
 +
This example shows two bundles composed of 2 T1s each.  The bundles
 +
have a mfrBundleIndex of 10 and 20 respectively.
  
 +
                  +-------------------------+
 +
                  |  Frame Relay Service  |
 +
                  +-----+-------------+-----+
 +
                        |            |
 +
                  +-----+------+------+-----+
 +
                  | MFR Bundle | MFR Bundle |
 +
                  |    10      |    20    |
 +
                  +--+-----+---+---+-----+--+
 +
                    |    |      |    |
 +
                  +-+-+ +-+-+  +-+-+ +-+-+
 +
                  |T1 | |T1 |  |T1 | |T1 |
 +
                  +---+ +---+  +-+-+ +---+
  
−
  -  mfrBundleLinkRowStatus            RowStatus
+
      Figure 2: Frame Relay Service Being Carried on 4 T1s
−
  -  mfrBundleLinkConfigBundleIndex    Integer32
 
−
  -  mfrBundleLinkNearEndName          SnmpAdminString
 
−
  -  mfrBundleLinkState                MfrBundleLinkState
 
−
  -  mfrBundleLinkFarEndName            SnmpAdminString
 
−
  -  mfrBundleLinkFarEndBundleName      SnmpAdminString
 
−
  -  mfrBundleLinkDelay                Integer32
 
−
  -  mfrBundleLinkFramesControlTx      Counter32
 
−
  -  mfrBundleLinkFramesControlRx      Counter32
 
−
  -  mfrBundleLinkFramesControlInvalid  Counter32
 
−
  -  mfrBundleLinkTimerExpiredCount    Counter32
 
−
  -  mfrBundleLinkLoopbackSuspected    Counter32
 
−
  -  mfrBundleLinkUnexpectedSequence    Counter32
 
−
  -  mfrBundleLinkMismatch              Counter32
 
  
−
=== Relationship With Other MIBS and Tables ===
+
The assignment of the ifTable index values could for example be:
  
−
==== Relationship With Interface Table ====
+
  ifIndex |  Description              | ifType
 +
  --------+----------------------------+----------------------
 +
      1    |  FrameRelayService        | frameRelayService(44)
 +
      2    |  MFR Bundle #10            | frf16MfrBundle(163)
 +
      3    |  MFR Bundle #20            | frf16MfrBundle(163)
 +
      4    |  ds1 #1/MFR Bundle Link #1 | ds1(18)
 +
      5    |  ds1 #2/MFR Bundle Link #2 | ds1(18)
 +
      6    |  ds1 #3/MFR Bundle Link #3 | ds1(18)
 +
      7    |  ds1 #4/MFR Bundle Link #4 | ds1(18)
  
−
2.3.1.1.  Bundle Links
+
The ifStackTable is then used to show the relationships between the
 +
various interfaces.
  
−
Each bundle link will appear as an interface in the ifTable.  The
+
  HigherLayer | LowerLayer
−
ifIndex that appears in the ifTable is used for indexing the bundle
+
  ------------+-----------
−
link tables in the UNI-NNI MFR MIB.
+
      0      |    1
 +
      1      |    2
 +
      1      |    3
 +
      2      |    4
 +
      2      |    5
 +
      3      |    6
 +
      3      |    7
 +
      4      |    0
 +
      5      |    0
 +
      6      |    0
 +
      7      |    0
  
−
2.3.1.2.  Bundles
+
The mfrBundleIfIndexMappingTable shows the relationship between the
 +
ifTable ifIndex and the mfrBundleIndex:
  
−
Each bundle will appear as an interface in the ifTable.  There will
+
  ifIndex | mfrBundleIfIndexMappingIndex
−
be corresponding mfrBundleIndex which may be different than the
+
  --------+-----------------------------
−
ifIndex of the bundle.
+
      2    |            10
 +
      3    |            20
  
−
The reason is best summarized in [[RFC2494|RFC 2494]] [RFC2494], which describes
+
The mfrBundleTable shows the relationship between the mfrBundleIndex
−
frame relay bundle of DS0.  It says:
+
and the ifIndex:
  
−
   This table is not indexed by ifIndex because the manager has to
+
   mfrBundleIndex | mfrBundleIfIndex
−
   choose the index in a createable row and the agent must be allowed
+
   ---------------+-----------------
−
  to select ifIndex values.
+
          10    |      2
 +
          20    |      3
  
−
The rows in the ifEntry table are not createable as they do not have
+
The mfrBundleLinkTable shows the relationship between the bundles and
−
row status.  [[RFC2863|RFC 2863]] [RFC2863] suggests that the ifIndex should be
+
bundle links:
−
chosen by the agent.  Here is its statement regarding row creation
 
−
and deletion:
 
  
−
   While some interfaces, for example, most physical interfaces,
+
   mfrBundleIndex | mfrBundleLinkIfIndex
−
   cannot be created via network management, other interfaces such as
+
   ---------------+---------------------
−
  logical interfaces sometimes can be.  The ifTable contains only
+
          10      |        4
−
  generic information about an interface.  Almost all 'create-able'
+
          10      |        5
−
  interfaces have other, media-specific, information through which
+
          20      |        6
 +
          20      |        7
  
 +
=== Creation Of Bundles and Bundle Links ===
  
 +
==== Creation Of Bundles ====
  
 +
A new bundle is created by setting a createAndGo(4) value in the
 +
mfrBundleRowStatus RowStatus object.  Optionally, an agent could also
 +
support setting a value of createAndWait(5) followed by a set to the
 +
value active(1).
 +
 +
When a bundle is created, the agent must create a new interface in
 +
the ifTable.  The ifIndex for this new interface is used for the
 +
value of mfrBundleIfIndex.
  
 +
==== Creation Of Bundle Links ====
  
−
  configuration parameters may be supplied prior to creating such an
+
A new bundle link is created by setting a createAndGo(4) value in the
−
  interface.  Thus, the ifTable does not itself support the creation
+
mfrBundleLinkRowStatus RowStatus object.
−
  or deletion of an interface (specifically, it has no RowStatus
 
−
  column).  Rather, if a particular interface type supports the
 
−
  dynamic creation and/or deletion of an interface of that type,
 
−
  then that media-specific MIB should include an appropriate
 
−
  RowStatus object (see the ATM LAN-Emulation Client MIB [ATMLANE]
 
−
  for an example of a MIB which does this).  Typically, when such a
 
−
  RowStatus object is created/deleted, then the conceptual row in
 
−
  the ifTable appears/disappears as a by-product, and an ifIndex
 
−
  value (chosen by the agent) is stored in an appropriate object in
 
−
  the media-specific MIB.
 
  
−
The ATM LAN-Emulation Client MIB [ATMLANE] uses different indices and
+
The bundle link is associated with a specific physical interface and
−
so does the IMA MIB [ATMIMA].  Looking at the examples we have, and
+
uses the ifIndex of the physical interface.  The mfrBundleLinkEntry
−
the statements from RFC, it seems better to have two indices. This
+
row objects may be created after or during creation of the physical
−
gives the SNMP agent implementor the freedom to manage their ifIndex
+
interface's ifEntry row objects.
−
in the way they like.
+
 
 +
The bundle identified in the object mfrBundleIndex must exist at time
 +
of bundle link creation.
  
−
2.3.1.3.  Mapping Between ifIndex and mfrBundleIndex
+
=== Notifications ===
  
−
The mfrBundleIfIndexMappingTable is indexed by ifIndex and provides
+
The linkUp and linkDown traps are defined in RFC 2223 [RFC2223].
−
the means to map a given ifIndex into the corresponding
 
−
mfrBundleIndex.  The mfrBundleIfIndexMapping object in the
 
−
mfrBundleTable (indexed by mfrBundleIndex) provides the reverse
 
−
mapping of a mfrBundleIndex to the corresponding ifIndex in the
 
−
ifTable.
 
  
−
2.3.1.4.  ifTable Objects
+
==== Bundle ====
  
−
The bundle configuration and status table.  There is a one-to-one
+
The following SNMP traps are defined for MFR bundles.
−
correspondence between a bundle and an interface represented in the
 
−
ifTable.
 
  
−
The following objects of the ifTable have specific meaning for an MFR
+
===== linkUp =====
−
bundle:
 
  
−
  ifAdminStatus  -  the bundle admin status
+
This trap is sent when the ifOperStatus of a bundle transitions from
−
  ifOperStatus   -  the bundle operational status
+
down to up. This occurs when a sufficient number of links
−
  ifSpeed        -  the current bandwidth of the bundle
+
(determined by mfrBundleActivationClass and mfrBundleThreshold) are
−
  ifInUcastPkts -  the number of frames received on the bundle
+
in the operationally up state.
−
  ifOutUcastPkts -  the number of frames transmitted on the bundle
 
−
  ifInErrors    -  frame (not fragment) errors
 
−
  ifOutErrors    -  frame (not fragment) errors
 
  
−
The following objects of the ifTable have specific meaning for an MFR
+
===== linkDown =====
−
bundle link:
 
  
 +
This trap is sent when the ifOperStatus of a bundle transitions from
 +
up to down.  This occurs when a insufficient number of links
 +
(determined by mfrBundleActivationClass and mfrBundleThreshold) are
 +
in the operationally up state.
  
 +
==== Bundle Link ====
  
 +
The following SNMP traps are defined for MFR bundle links.
  
 +
===== linkUp =====
  
 +
This trap is sent when a mfrBundleLinkState object transitions to the
 +
value mfrBundleLinkStateUp.
  
−
  ifAdminStatus  -  the bundle link admin status
+
===== linkDown =====
−
  ifOperStatus  -  the bundle link operational status
 
−
  ifSpeed        -  the bandwidth of the bundle link interface
 
−
  ifInUcastPkts  -  the number of frames received on the bundle link
 
−
  ifOutUcastPkts -  the number of frames transmitted on the bundle
 
−
                    link
 
−
  ifInErrors    -  frame and fragment errors
 
−
  ifOutErrors    -  frame and fragment errors
 
  
−
==== Relationship With Interface Stack Table ====
+
This trap is sent when a mfrBundleLinkState object transitions from
 +
the value mfrBundleLinkStateUp.
  
−
The bundles and bundle links will appear in the ifStackTable defined
+
===== mfrMibTrapBundleLinkMismatch =====
−
in [[RFC2863|RFC 2863]] [RFC2863].  Each bundle link will appear a lower layer to
 
−
its owner bundle.  The bundle will appear as a higher layer to the
 
−
bundle links and as a lower layer to a frame relay service or UNI.
 
  
−
==== Relationship With Frame Relay DTE MIB ====
+
This trap indicates that a bundle link mismatch has been detected.
 +
The following objects are reported:
  
−
The bundle will have a one-to-one correspondence with a DLCMI or UNI
+
-  mfrBundleNearEndName:          configured name of near end bundle
−
that appear in the DTE MIB tables [RFC2115].
+
-  mfrBundleFarEndName:          previously reported name of far
 +
                                  end bundle
 +
-  mfrBundleLinkNearEndName:      configured name of near end bundle
 +
- mfrBundleLinkFarEndName:      reported name of far end bundle
 +
- mfrBundleLinkFarEndBundleName: currently reported name of far
 +
                                  end bundle
  
−
==== Relationship With Frame Relay Service MIB ====
+
Note that the configured items may have been configured
 +
automatically.  Note also that the mfrBundleLinkMismatch counter is
 +
incremented when the trap is sent.
  
−
There is a one-to-one relationship between the MFR bundle and the
+
== Object Definitions ==
−
frame relay service logical port defined in RFC1604 [RFC1604].
 
  
−
==== Example ====
+
Managed objects are accessed via a virtual information store, termed
−
 
+
the Management Information Base or MIB.  Objects in the MIB are
−
Figure two shows an example of how the various tables are related.
+
defined using the subset of Abstract Syntax Notation One (ASN.1)
−
This example shows two bundles composed of 2 T1s each.  The bundles
+
defined in the SMI. In particular, each object type is named by an
−
have a mfrBundleIndex of 10 and 20 respectively.
+
OBJECT IDENTIFIER, an administratively assigned name.  The object
 +
type together with an object instance serves to uniquely identify a
 +
specific instantiation of the object.  For human convenience, we
 +
often use a textual string, termed the descriptor, to refer to the
 +
object type.
  
−
                  +-------------------------+
+
FR-MFR-MIB DEFINITIONS ::= BEGIN
−
                  |  Frame Relay Service  |
 
−
                  +-----+-------------+-----+
 
−
                        |            |
 
−
                  +-----+------+------+-----+
 
−
                  | MFR Bundle | MFR Bundle |
 
−
                  |    10      |    20    |
 
−
                  +--+-----+---+---+-----+--+
 
−
                    |    |      |    |
 
−
                  +-+-+ +-+-+  +-+-+ +-+-+
 
−
                  |T1 | |T1 |  |T1 | |T1 |
 
−
                  +---+ +---+  +-+-+ +---+
 
−
 
 
−
      Figure 2: Frame Relay Service Being Carried on 4 T1s
 
  
 +
IMPORTS
 +
  MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
 +
      NOTIFICATION-TYPE, transmission
 +
      FROM SNMPv2-SMI
 +
  TEXTUAL-CONVENTION, TestAndIncr, RowStatus
 +
      FROM SNMPv2-TC
 +
  MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
 +
      FROM SNMPv2-CONF
 +
  SnmpAdminString
 +
      FROM SNMP-FRAMEWORK-MIB
 +
  InterfaceIndex, ifIndex
 +
      FROM IF-MIB;
  
 +
mfrMib MODULE-IDENTITY
 +
  LAST-UPDATED "200011300000Z"
 +
  ORGANIZATION "IETF Frame Relay Service MIB (frnetmib)
 +
                Working Group"
 +
  CONTACT-INFO
 +
    "WG Charter:
 +
          http://www.ietf.org/html.charters/frnetmib-charter.html
 +
      WG-email:      [email protected]
 +
      Subscribe:    [email protected]
 +
      Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
  
 +
      Chair:      Andy Malis
 +
                  Vivace Networks
 +
      Email:      [email protected]
  
 +
      WG editor:  Prayson Pate
 +
                  Overture Networks
 +
      Email:      [email protected]
  
 +
      Co-author:  Bob Lynch
 +
                  Overture Networks
  
 +
      EMail:      [email protected]
  
−
The assignment of the ifTable index values could for example be:
+
      Co-author: Kenneth Rehbehn
 +
                  Megisto Systems, Inc.
 +
      EMail:      [email protected]"
  
−
   ifIndex |  Description              | ifType
+
   DESCRIPTION
−
  --------+----------------------------+----------------------
+
       "This is the MIB used to control and monitor the multilink
−
       1    |  FrameRelayService        | frameRelayService(44)
+
      frame relay (MFR) function described in FRF.16."
−
      2    |  MFR Bundle #10            | frf16MfrBundle(163)
 
−
      3    |  MFR Bundle #20            | frf16MfrBundle(163)
 
−
      4    |  ds1 #1/MFR Bundle Link #1 | ds1(18)
 
−
      5    |  ds1 #2/MFR Bundle Link #2 | ds1(18)
 
−
      6    |  ds1 #3/MFR Bundle Link #3 | ds1(18)
 
−
      7    |  ds1 #4/MFR Bundle Link #4 | ds1(18)
 
  
−
The ifStackTable is then used to show the relationships between the
+
-- ---------------------------------------------------------
−
various interfaces.
+
-- ---------------------------------------------------------
 +
-- Revision History
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
−
   HigherLayer | LowerLayer
+
   REVISION "200011300000Z"
−
   ------------+-----------
+
   DESCRIPTION
−
       0      |    1
+
       "Published as RFC 3020."
−
      1      |    2
 
−
      1      |    3
 
−
      2      |    4
 
−
      2      |    5
 
−
      3      |    6
 
−
      3      |    7
 
−
      4      |    0
 
−
      5      |    0
 
−
      6      |    0
 
−
      7      |    0
 
  
−
The mfrBundleIfIndexMappingTable shows the relationship between the
+
  ::= { transmission 47 }
−
ifTable ifIndex and the mfrBundleIndex:
 
  
−
  ifIndex | mfrBundleIfIndexMappingIndex
+
-- ---------------------------------------------------------
−
  --------+-----------------------------
+
-- ---------------------------------------------------------
−
      2    |            10
+
-- Textual Conventions
−
      3    |            20
+
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
−
The mfrBundleTable shows the relationship between the mfrBundleIndex
+
MfrBundleLinkState ::= TEXTUAL-CONVENTION
−
and the ifIndex:
+
  STATUS      current
−
 
+
  DESCRIPTION
−
   mfrBundleIndex | mfrBundleIfIndex
+
      "The possible states for a bundle link, as defined in
−
  ---------------+-----------------
+
      Annex A of FRF.16."
−
          10    |     2
+
  REFERENCE "FRF.16 Annex A"
−
           20    |     3
+
   SYNTAX  INTEGER {
 +
      mfrBundleLinkStateAddSent      (1),
 +
      mfrBundleLinkStateAddRx        (2),
 +
      mfrBundleLinkStateAddAckRx     (3),
 +
      mfrBundleLinkStateUp           (4),
 +
      mfrBundleLinkStateIdlePending  (5),
 +
      mfrBundleLinkStateIdle          (6),
 +
      mfrBundleLinkStateDown          (7),
 +
      mfrBundleLinkStateDownIdle     (8)
 +
      }
  
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
 +
-- Object Identifiers
  
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
 +
mfrMibScalarObjects    OBJECT IDENTIFIER ::= { mfrMib 1 }
 +
mfrMibBundleObjects    OBJECT IDENTIFIER ::= { mfrMib 2 }
 +
mfrMibBundleLinkObjects OBJECT IDENTIFIER ::= { mfrMib 3 }
 +
mfrMibTraps            OBJECT IDENTIFIER ::= { mfrMib 4 }
 +
mfrMibConformance      OBJECT IDENTIFIER ::= { mfrMib 5 }
  
 +
mfrMibTrapsPrefix      OBJECT IDENTIFIER ::= { mfrMibTraps 0 }
  
 +
mfrMibGroups      OBJECT IDENTIFIER ::= { mfrMibConformance 1 }
 +
mfrMibCompliances OBJECT IDENTIFIER ::= { mfrMibConformance 2 }
  
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
 +
-- Scalars
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
 +
mfrBundleMaxNumBundles OBJECT-TYPE
 +
  SYNTAX  Integer32
 +
  MAX-ACCESS read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "This object is used to inform the manager of the
 +
      maximum number of bundles supported by this device."
 +
  ::= { mfrMibScalarObjects 1 }
  
 +
mfrBundleNextIndex OBJECT-TYPE
 +
  SYNTAX  TestAndIncr
 +
  MAX-ACCESS read-write
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "This object is used to assist the manager in
 +
      selecting a value for mfrBundleIndex during row creation
 +
      in the mfrBundleTable.  It can also be used to avoid race
 +
      conditions with multiple managers trying to create
 +
      rows in the table (see RFC 2494 [RFC2494] for one such
 +
      alogrithm)."
 +
  REFERENCE "RFC 2494"
 +
  ::= { mfrMibScalarObjects 2 }
  
−
The mfrBundleLinkTable shows the relationship between the bundles and
+
-- ---------------------------------------------------------
−
bundle links:
+
-- ---------------------------------------------------------
−
 
+
-- Bundle Table
−
  mfrBundleIndex | mfrBundleLinkIfIndex
+
-- ---------------------------------------------------------
−
  ---------------+---------------------
+
-- ---------------------------------------------------------
−
          10      |        4
 
−
          10      |        5
 
−
          20      |        6
 
−
          20      |        7
 
  
−
=== Creation Of Bundles and Bundle Links ===
+
mfrBundleTable OBJECT-TYPE
 +
  SYNTAX  SEQUENCE OF MfrBundleEntry
 +
  MAX-ACCESS  not-accessible
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The bundle configuration and status table.  There
 +
      is a one-to-one correspondence between a bundle
 +
      and an interface represented in the ifTable.
  
−
==== Creation Of Bundles ====
+
      The following objects of the ifTable have specific
 +
      meaning for an MFR bundle:
 +
          ifAdminStatus  - the bundle admin status
 +
          ifOperStatus  - the bundle operational status
 +
          ifSpeed        - the current bandwidth of the bundle
 +
          ifInUcastPkts  - the number of frames received
 +
                          on the bundle
 +
          ifOutUcastPkts - the number of frames transmitted
 +
                          on the bundle
 +
          ifInErrors    - frame (not fragment) errors
 +
          ifOutErrors    - frame (not fragment) errors
 +
          "
 +
  ::= { mfrMibBundleObjects 3 }
  
−
A new bundle is created by setting a createAndGo(4) value in the
+
mfrBundleEntry OBJECT-TYPE
−
mfrBundleRowStatus RowStatus object. Optionally, an agent could also
+
  SYNTAX  MfrBundleEntry
−
support setting a value of createAndWait(5) followed by a set to the
+
  MAX-ACCESS  not-accessible
−
value active(1).
+
  STATUS  current
 +
  DESCRIPTION
 +
      "An entry in the bundle table."
 +
  INDEX  { mfrBundleIndex }
 +
  ::= { mfrBundleTable 1 }
  
−
When a bundle is created, the agent must create a new interface in
+
MfrBundleEntry ::=
−
the ifTable.  The ifIndex for this new interface is used for the
+
  SEQUENCE {
−
value of mfrBundleIfIndex.
+
      mfrBundleIndex
 +
        Integer32,
 +
      mfrBundleIfIndex
 +
        InterfaceIndex,
 +
      mfrBundleRowStatus
 +
        RowStatus,
 +
      mfrBundleNearEndName
 +
        SnmpAdminString,
 +
      mfrBundleFragmentation
 +
        INTEGER,
 +
      mfrBundleMaxFragSize
 +
        Integer32,
 +
      mfrBundleTimerHello
 +
        INTEGER,
  
−
==== Creation Of Bundle Links ====
+
      mfrBundleTimerAck
−
 
+
        INTEGER,
−
A new bundle link is created by setting a createAndGo(4) value in the
+
      mfrBundleCountMaxRetry
−
mfrBundleLinkRowStatus RowStatus object.
+
        INTEGER,
 +
      mfrBundleActivationClass
 +
        INTEGER,
 +
      mfrBundleThreshold
 +
        Integer32,
 +
      mfrBundleMaxDiffDelay
 +
        Integer32,
 +
      mfrBundleSeqNumSize
 +
        INTEGER,
 +
      mfrBundleMaxBundleLinks
 +
        Integer32,
 +
      mfrBundleLinksConfigured
 +
        Integer32,
 +
      mfrBundleLinksActive
 +
        Integer32,
 +
      mfrBundleBandwidth
 +
        Integer32,
 +
      mfrBundleFarEndName
 +
        SnmpAdminString,
 +
      mfrBundleResequencingErrors
 +
        Counter32
 +
      }
  
−
The bundle link is associated with a specific physical interface and
+
mfrBundleIndex OBJECT-TYPE
−
uses the ifIndex of the physical interface. The mfrBundleLinkEntry
+
  SYNTAX  Integer32 (1..2147483647)
−
row objects may be created after or during creation of the physical
+
  MAX-ACCESS  not-accessible
−
interface's ifEntry row objects.
+
  STATUS  current
 +
  DESCRIPTION
 +
      "The index into the table.  While this corresponds
 +
      to an entry in the ifTable, the value of mfrBundleIndex
 +
      need not match that of the ifIndex in the ifTable.
 +
      A manager can use mfrBundleNextIndex to select a unique
 +
      mfrBundleIndex for creating a new row."
 +
  ::= { mfrBundleEntry 1 }
  
−
The bundle identified in the object mfrBundleIndex must exist at time
+
mfrBundleIfIndex OBJECT-TYPE
−
of bundle link creation.
+
  SYNTAX  InterfaceIndex
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The value must match an entry in the interface
 +
      table whose ifType must be set to frf16MfrBundle(163).
  
−
=== Notifications ===
+
      For example: if the value of mfrBundleIfIndex is 10,
 +
      then a corresponding entry should be present in
  
−
The linkUp and linkDown traps are defined in [[RFC2223|RFC 2223]] [RFC2223].
+
      the ifTable with an index of 10 and an ifType of 163."
 +
  ::= { mfrBundleEntry 2 }
  
−
==== Bundle ====
+
mfrBundleRowStatus OBJECT-TYPE
−
 
+
  SYNTAX  RowStatus
−
The following SNMP traps are defined for MFR bundles.
+
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The mfrBundleRowStatus object allows create, change,
 +
        and delete operations on bundle entries."
 +
  REFERENCE "RFC 1903"
 +
  ::= { mfrBundleEntry 3 }
  
 +
mfrBundleNearEndName OBJECT-TYPE
 +
  SYNTAX  SnmpAdminString
 +
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The configured name of the bundle."
 +
  REFERENCE "FRF.16 section 3.4.1"
 +
  ::= { mfrBundleEntry 4 }
  
 +
mfrBundleFragmentation OBJECT-TYPE
 +
  SYNTAX  INTEGER {
 +
      enable  (1),
 +
      disable (2)
 +
      }
 +
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Controls whether the bundle performs/accepts
 +
      fragmentation and re-assembly.  The possible
 +
      values are:
  
 +
      enable(1) - Bundle links will fragment frames
  
 +
      disable(2) - Bundle links will not fragment
 +
                  frames."
 +
  DEFVAL { disable }
 +
  ::= { mfrBundleEntry 5 }
  
 +
mfrBundleMaxFragSize OBJECT-TYPE
 +
  SYNTAX  Integer32 (-1..8184)
 +
  UNITS "Octets"
 +
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The maximum fragment size supported.  Note that this
  
 +
      is only valid if mfrBundleFragmentation is set to enable(1).
  
 +
      Zero is not a valid fragment size.
  
 +
      A bundle that does not support fragmentation must return
 +
      this object with a value of -1."
 +
  DEFVAL { -1 }
 +
  ::= { mfrBundleEntry 6 }
  
 +
mfrBundleTimerHello OBJECT-TYPE
 +
  SYNTAX  INTEGER (1..180)
 +
  UNITS "Seconds"
 +
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The configured MFR Hello Timer value."
 +
  REFERENCE "FRF.16 section 4.3.8.1"
 +
  DEFVAL { 10 }
 +
  ::= { mfrBundleEntry 7 }
  
−
2.5.1.1. linkUp
+
mfrBundleTimerAck OBJECT-TYPE
 +
  SYNTAX  INTEGER (1..10)
 +
  UNITS "Seconds"
 +
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The configured MFR T_ACK value."
 +
  REFERENCE "FRF.16 section 4.3.8.2"
 +
  DEFVAL { 4 }
 +
  ::= { mfrBundleEntry 8 }
  
−
This trap is sent when the ifOperStatus of a bundle transitions from
+
mfrBundleCountMaxRetry OBJECT-TYPE
−
down to up.  This occurs when a sufficient number of links
+
  SYNTAX  INTEGER (1..5)
−
(determined by mfrBundleActivationClass and mfrBundleThreshold) are
+
  MAX-ACCESS  read-create
−
in the operationally up state.
+
  STATUS current
 +
  DESCRIPTION
 +
      "The MFR N_MAX_RETRY value."
 +
  REFERENCE "FRF.16 section 4.3.8.3"
 +
  DEFVAL { 2 }
 +
  ::= { mfrBundleEntry 9 }
  
−
2.5.1.2. linkDown
+
mfrBundleActivationClass OBJECT-TYPE
−
 
+
  SYNTAX INTEGER {
−
This trap is sent when the ifOperStatus of a bundle transitions from
+
      mfrBundleActivationClassA (1),
−
up to down.  This occurs when a insufficient number of links
+
      mfrBundleActivationClassB (2),
−
(determined by mfrBundleActivationClass and mfrBundleThreshold) are
+
      mfrBundleActivationClassC (3),
−
in the operationally up state.
+
      mfrBundleActivationClassD (4)
 +
      }
  
−
==== Bundle Link ====
+
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Controls the conditions under which the bundle is activated.
 +
      The following settings are available:
  
−
The following SNMP traps are defined for MFR bundle links.
+
          mfrBundleActivationClassA(1) - at least one must link up
 +
          mfrBundleActivationClassB(2) - all links must be up
 +
          mfrBundleActivationClassC(3) - a certain number must be
 +
                                        up.  Refer to
 +
                                        mfrBundleThreshold for
 +
                                        the required number.
 +
          mfrBundleActivationClassD(4) - custom (implementation
 +
                                        specific)."
 +
  REFERENCE "FRF.16 section 4.2.2.1"
 +
  DEFVAL { mfrBundleActivationClassA }
 +
  ::= { mfrBundleEntry 10 }
  
−
2.5.2.1.  linkUp
+
mfrBundleThreshold OBJECT-TYPE
−
 
+
  SYNTAX  Integer32 (-1..2147483647)
−
This trap is sent when a mfrBundleLinkState object transitions to the
+
  UNITS "Bundle Links"
−
value mfrBundleLinkStateUp.
+
  MAX-ACCESS  read-create
 +
  STATUS current
 +
  DESCRIPTION
 +
      "Specifies the number of links that must be in operational
 +
      'up' state before the bundle will transition to an
 +
      operational up/active state.  If the number of
 +
      operational 'up' links falls below this value,
 +
      then the bundle will transition to an inactive
 +
      state.
  
−
2.5.2.2. linkDown
+
      Note - this is only valid when mfrBundleActivationClass
 +
      is set to mfrBundleActivationClassC or, depending upon the
 +
      implementation, to mfrBundleActivationClassD.  A bundle that
 +
      is not set to one of these must return this object with a
 +
      value of -1."
 +
  REFERENCE "FRF.16 section 4.2.2.1"
 +
  DEFVAL { -1 }
 +
  ::= { mfrBundleEntry 11 }
  
−
This trap is sent when a mfrBundleLinkState object transitions from
+
mfrBundleMaxDiffDelay OBJECT-TYPE
−
the value mfrBundleLinkStateUp.
+
  SYNTAX  Integer32 (-1..2147483647)
−
 
+
  UNITS "Milliseconds"
−
2.5.2.3.  mfrMibTrapBundleLinkMismatch
+
  MAX-ACCESS read-create
−
 
+
  STATUS current
−
This trap indicates that a bundle link mismatch has been detected.
+
  DESCRIPTION
−
The following objects are reported:
+
       "The maximum delay difference between the bundle
−
 
+
      links.
−
-  mfrBundleNearEndName:          configured name of near end bundle
 
−
- mfrBundleFarEndName:          previously reported name of far
 
−
                                  end bundle
 
−
-  mfrBundleLinkNearEndName:      configured name of near end bundle
 
−
-  mfrBundleLinkFarEndName:       reported name of far end bundle
 
−
-  mfrBundleLinkFarEndBundleName: currently reported name of far
 
−
                                  end bundle
 
−
 
 
−
Note that the configured items may have been configured
 
−
automatically.  Note also that the mfrBundleLinkMismatch counter is
 
−
incremented when the trap is sent.
 
  
 +
      A value of -1 indicates that this object does not contain
 +
      a valid value"
 +
  DEFVAL { -1 }
 +
  ::= { mfrBundleEntry 12 }
  
 +
mfrBundleSeqNumSize OBJECT-TYPE
 +
  SYNTAX  INTEGER {
 +
      seqNumSize12bit (1),
 +
      seqNumSize24bit (2)
 +
      }
 +
  MAX-ACCESS  read-create
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Controls whether the standard FRF.12 12-bit
 +
      sequence number is used or the optional 24-bit
 +
      sequence number."
 +
  REFERENCE "FRFTC/99-194"
 +
  DEFVAL { seqNumSize12bit }
 +
  ::= { mfrBundleEntry 13 }
  
 +
mfrBundleMaxBundleLinks OBJECT-TYPE
 +
  SYNTAX  Integer32 (1..2147483647)
 +
  UNITS "Bundle Links"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The maximum number of bundle links supported for
 +
      this bundle."
 +
  ::= { mfrBundleEntry 14 }
  
 +
mfrBundleLinksConfigured OBJECT-TYPE
 +
  SYNTAX  Integer32 (1..2147483647)
 +
  UNITS "Bundle Links"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The number of links configured for the bundle."
 +
  ::= {  mfrBundleEntry 15 }
  
 +
mfrBundleLinksActive OBJECT-TYPE
 +
  SYNTAX  Integer32 (-1..2147483647)
 +
  UNITS "Bundle Links"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The number of links that are active."
 +
  ::= {  mfrBundleEntry 16 }
  
 +
mfrBundleBandwidth OBJECT-TYPE
 +
    SYNTAX  Integer32
 +
    UNITS "Bits/Sec"
 +
    MAX-ACCESS  read-only
 +
    STATUS  current
 +
    DESCRIPTION
 +
      "The amount of available bandwidth on the bundle"
 +
    ::= {  mfrBundleEntry 17 }
  
 +
mfrBundleFarEndName OBJECT-TYPE
 +
  SYNTAX  SnmpAdminString
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Name of the bundle received from the far end."
 +
  REFERENCE "FRF.16 section 3.4.1"
 +
  ::= { mfrBundleEntry 18 }
  
 +
mfrBundleResequencingErrors OBJECT-TYPE
 +
  SYNTAX  Counter32
 +
  UNITS "Error Events"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "A count of the number of resequencing errors.  Each event
 +
      may correspond to multiple lost frames.  Example:
 +
      Say sequence number 56, 59 and 60 is received for DLCI 100.
 +
      It is decided by some means that sequence 57 and 58 is lost.
 +
      This counter should then be incremented by ONE, even though
 +
      two frames were lost."
 +
  ::= { mfrBundleEntry 19 }
  
−
== Object Definitions ==
+
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
 +
-- ifIndex Mapping to Bundle Index Table
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
−
Managed objects are accessed via a virtual information store, termed
+
mfrBundleIfIndexMappingTable OBJECT-TYPE
−
the Management Information Base or MIB. Objects in the MIB are
+
  SYNTAX  SEQUENCE OF MfrBundleIfIndexMappingEntry
−
defined using the subset of Abstract Syntax Notation One (ASN.1)
+
  MAX-ACCESS  not-accessible
−
defined in the SMI.  In particular, each object type is named by an
+
  STATUS current
−
OBJECT IDENTIFIER, an administratively assigned name.  The object
+
  DESCRIPTION
−
type together with an object instance serves to uniquely identify a
+
      "A table mapping the values of ifIndex to the
−
specific instantiation of the object.  For human convenience, we
+
        mfrBundleIndex.  This is required in order to find
−
often use a textual string, termed the descriptor, to refer to the
+
        the mfrBundleIndex given an ifIndex.  The mapping of
−
object type.
+
        mfrBundleIndex to ifIndex is provided by the
 +
        mfrBundleIfIndex entry in the mfrBundleTable."
  
−
FR-MFR-MIB DEFINITIONS ::= BEGIN
+
  ::= { mfrMibBundleObjects 4 }
  
−
IMPORTS
+
mfrBundleIfIndexMappingEntry OBJECT-TYPE
−
  MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
+
  SYNTAX  MfrBundleIfIndexMappingEntry
−
      NOTIFICATION-TYPE, transmission
+
   MAX-ACCESS  not-accessible
−
      FROM SNMPv2-SMI
+
   STATUS  current
−
   TEXTUAL-CONVENTION, TestAndIncr, RowStatus
+
   DESCRIPTION
−
      FROM SNMPv2-TC
+
        "Each row describes one ifIndex to mfrBundleIndex mapping."
−
   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+
INDEX  { ifIndex }
−
      FROM SNMPv2-CONF
+
::= { mfrBundleIfIndexMappingTable 1 }
−
   SnmpAdminString
 
−
      FROM SNMP-FRAMEWORK-MIB
 
−
  InterfaceIndex, ifIndex
 
−
      FROM IF-MIB;
 
  
−
mfrMib MODULE-IDENTITY
+
MfrBundleIfIndexMappingEntry ::=
−
  LAST-UPDATED "200011300000Z"
+
  SEQUENCE {
−
  ORGANIZATION "IETF Frame Relay Service MIB (frnetmib)
+
     mfrBundleIfIndexMappingIndex
−
                Working Group"
+
        Integer32
−
  CONTACT-INFO
+
     }
−
    "WG Charter:
 
−
          http://www.ietf.org/html.charters/frnetmib-charter.html
 
−
      WG-email:      [email protected]
 
−
      Subscribe:    [email protected]
 
−
      Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
 
−
 
 
−
      Chair:      Andy Malis
 
−
                  Vivace Networks
 
−
      Email:     [email protected]
 
−
 
 
−
      WG editor:  Prayson Pate
 
−
                  Overture Networks
 
−
      Email:      [email protected]
 
−
 
 
−
      Co-author:  Bob Lynch
 
−
                  Overture Networks
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
      EMail:      [email protected]
 
−
 
 
−
      Co-author:  Kenneth Rehbehn
 
−
                  Megisto Systems, Inc.
 
−
      EMail:     [email protected]"
 
  
 +
mfrBundleIfIndexMappingIndex OBJECT-TYPE
 +
  SYNTAX  Integer32 (1..2147483647)
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
      "This is the MIB used to control and monitor the multilink
+
        "The mfrBundleIndex of the given ifIndex."
−
      frame relay (MFR) function described in FRF.16."
+
::= { mfrBundleIfIndexMappingEntry 2 }
  
 
-- ---------------------------------------------------------
 
-- ---------------------------------------------------------
 
-- ---------------------------------------------------------
 
-- ---------------------------------------------------------
−
-- Revision History
+
-- Bundle Link Table
 
-- ---------------------------------------------------------
 
-- ---------------------------------------------------------
 
-- ---------------------------------------------------------
 
-- ---------------------------------------------------------
  
−
   REVISION "200011300000Z"
+
mfrBundleLinkTable OBJECT-TYPE
−
   DESCRIPTION
+
  SYNTAX  SEQUENCE OF MfrBundleLinkEntry
−
       "Published as [[RFC3020|RFC 3020]]."
+
  MAX-ACCESS  not-accessible
 +
   STATUS  current
 +
   DESCRIPTION
 +
      "The bundle link configuration and status table.  There
 +
       is a one-to-one correspondence between a bundle link
 +
      and a physical interface represented in the ifTable.  The
 +
      ifIndex of the physical interface is used to index the
 +
      bundle link table, and to create rows.
  
−
  ::= { transmission 47 }
+
      The following objects of the ifTable have specific
 +
      meaning for an MFR bundle link:
  
−
-- ---------------------------------------------------------
+
          ifAdminStatus  - the bundle link admin status
−
-- ---------------------------------------------------------
+
          ifOperStatus   - the bundle link operational
−
-- Textual Conventions
+
                          status
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
MfrBundleLinkState ::= TEXTUAL-CONVENTION
 
−
  STATUS      current
 
−
  DESCRIPTION
 
−
      "The possible states for a bundle link, as defined in
 
−
      Annex A of FRF.16."
 
−
  REFERENCE "FRF.16 Annex A"
 
−
  SYNTAX  INTEGER {
 
−
      mfrBundleLinkStateAddSent      (1),
 
−
      mfrBundleLinkStateAddRx        (2),
 
−
      mfrBundleLinkStateAddAckRx      (3),
 
−
      mfrBundleLinkStateUp            (4),
 
−
      mfrBundleLinkStateIdlePending   (5),
 
−
      mfrBundleLinkStateIdle          (6),
 
−
      mfrBundleLinkStateDown          (7),
 
−
      mfrBundleLinkStateDownIdle      (8)
 
−
      }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- Object Identifiers
 
  
 +
          ifSpeed        - the bandwidth of the bundle
 +
                          link interface
 +
          ifInUcastPkts  - the number of frames received
 +
                          on the bundle link
 +
          ifOutUcastPkts - the number of frames transmitted
 +
                          on the bundle link
 +
          ifInErrors    - frame and fragment errors
 +
          ifOutErrors    - frame and fragment errors"
 +
  ::= { mfrMibBundleLinkObjects 1 }
  
 +
mfrBundleLinkEntry OBJECT-TYPE
 +
  SYNTAX  MfrBundleLinkEntry
 +
  MAX-ACCESS  not-accessible
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "An entry in the bundle link table."
 +
  INDEX  { ifIndex }
 +
  ::= { mfrBundleLinkTable 1 }
  
 +
MfrBundleLinkEntry ::=
 +
  SEQUENCE {
 +
      mfrBundleLinkRowStatus
 +
        RowStatus,
 +
      mfrBundleLinkConfigBundleIndex
 +
        Integer32,
 +
      mfrBundleLinkNearEndName
 +
        SnmpAdminString,
 +
      mfrBundleLinkState
 +
        MfrBundleLinkState,
 +
      mfrBundleLinkFarEndName
 +
        SnmpAdminString,
 +
      mfrBundleLinkFarEndBundleName
 +
        SnmpAdminString,
 +
      mfrBundleLinkDelay
 +
        Integer32,
 +
      mfrBundleLinkFramesControlTx
 +
        Counter32,
 +
      mfrBundleLinkFramesControlRx
 +
        Counter32,
 +
      mfrBundleLinkFramesControlInvalid
 +
        Counter32,
 +
      mfrBundleLinkTimerExpiredCount
 +
        Counter32,
 +
      mfrBundleLinkLoopbackSuspected
 +
        Counter32,
 +
      mfrBundleLinkUnexpectedSequence
 +
        Counter32,
 +
      mfrBundleLinkMismatch
  
 +
        Counter32
 +
      }
  
−
-- ---------------------------------------------------------
+
mfrBundleLinkRowStatus OBJECT-TYPE
−
-- ---------------------------------------------------------
+
   SYNTAX  RowStatus
−
 
+
   MAX-ACCESS read-create
−
mfrMibScalarObjects    OBJECT IDENTIFIER ::= { mfrMib 1 }
 
−
mfrMibBundleObjects    OBJECT IDENTIFIER ::= { mfrMib 2 }
 
−
mfrMibBundleLinkObjects OBJECT IDENTIFIER ::= { mfrMib 3 }
 
−
mfrMibTraps            OBJECT IDENTIFIER ::= { mfrMib 4 }
 
−
mfrMibConformance      OBJECT IDENTIFIER ::= { mfrMib 5 }
 
−
 
 
−
mfrMibTrapsPrefix      OBJECT IDENTIFIER ::= { mfrMibTraps 0 }
 
−
 
 
−
mfrMibGroups      OBJECT IDENTIFIER ::= { mfrMibConformance 1 }
 
−
mfrMibCompliances OBJECT IDENTIFIER ::= { mfrMibConformance 2 }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- Scalars
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
mfrBundleMaxNumBundles OBJECT-TYPE
 
−
   SYNTAX  Integer32
 
−
   MAX-ACCESS read-only
 
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "This object is used to inform the manager of the
+
       "The mfrBundleLinkRowStatus object allows create, change,
−
      maximum number of bundles supported by this device."
+
      and delete operations on mfrBundleLink entries.
−
   ::= { mfrMibScalarObjects 1 }
+
 
 +
      The create operation must fail if no physical interface
 +
      is associated with the bundle link."
 +
   ::= { mfrBundleLinkEntry 1 }
  
−
mfrBundleNextIndex OBJECT-TYPE
+
mfrBundleLinkConfigBundleIndex OBJECT-TYPE
−
   SYNTAX  TestAndIncr
+
   SYNTAX  Integer32 (1..2147483647)
−
   MAX-ACCESS read-write
+
   MAX-ACCESS read-create
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "This object is used to assist the manager in
+
       "The mfrBundleLinkConfigBundleIndex object allows
−
       selecting a value for mfrBundleIndex during row creation
+
      the manager to control the bundle to which the bundle
−
       in the mfrBundleTable.  It can also be used to avoid race
+
       link is assigned.  If no value were in this field, then
−
       conditions with multiple managers trying to create
+
       the bundle would remain in NOT_READY rowStatus and be
−
       rows in the table (see [[RFC2494|RFC 2494]] [RFC2494] for one such
+
       unable to go to active.  With an appropriate mfrBundleIndex
−
       alogrithm)."
+
       in this field, then we could put the mfrBundleLink row in
−
  REFERENCE "[[RFC2494|RFC 2494]]"
+
       NOT_IN_SERVICE or ACTIVE rowStatus."
−
   ::= { mfrMibScalarObjects 2 }
+
   ::= { mfrBundleLinkEntry 2 }
  
−
-- ---------------------------------------------------------
+
mfrBundleLinkNearEndName OBJECT-TYPE
−
-- ---------------------------------------------------------
+
   SYNTAX  SnmpAdminString
−
-- Bundle Table
+
   MAX-ACCESS  read-create
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
mfrBundleTable OBJECT-TYPE
 
−
   SYNTAX  SEQUENCE OF MfrBundleEntry
 
−
   MAX-ACCESS  not-accessible
 
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "The bundle configuration and status table.  There
+
       "The configured bundle link name that is sent to the far end."
−
      is a one-to-one correspondence between a bundle
+
  ::= { mfrBundleLinkEntry 3 }
−
      and an interface represented in the ifTable.
 
  
−
      The following objects of the ifTable have specific
+
mfrBundleLinkState OBJECT-TYPE
−
      meaning for an MFR bundle:
+
   SYNTAX  MfrBundleLinkState
−
          ifAdminStatus  - the bundle admin status
+
   MAX-ACCESS  read-only
−
          ifOperStatus  - the bundle operational status
 
−
          ifSpeed        - the current bandwidth of the bundle
 
−
          ifInUcastPkts  - the number of frames received
 
−
                          on the bundle
 
−
          ifOutUcastPkts - the number of frames transmitted
 
−
                          on the bundle
 
−
          ifInErrors    - frame (not fragment) errors
 
−
          ifOutErrors    - frame (not fragment) errors
 
−
          "
 
−
  ::= { mfrMibBundleObjects 3 }
 
−
 
 
−
mfrBundleEntry OBJECT-TYPE
 
−
   SYNTAX  MfrBundleEntry
 
−
   MAX-ACCESS  not-accessible
 
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "An entry in the bundle table."
+
       "Current bundle link state as defined by the MFR protocol
−
   INDEX  { mfrBundleIndex }
+
      described in Annex A of FRF.16."
−
   ::= { mfrBundleTable 1 }
+
   REFERENCE "FRF.16 Annex A"
 +
   ::= { mfrBundleLinkEntry 4 }
  
−
MfrBundleEntry ::=
+
mfrBundleLinkFarEndName OBJECT-TYPE
−
  SEQUENCE {
 
−
      mfrBundleIndex
 
−
        Integer32,
 
−
      mfrBundleIfIndex
 
−
        InterfaceIndex,
 
−
      mfrBundleRowStatus
 
−
        RowStatus,
 
−
      mfrBundleNearEndName
 
−
        SnmpAdminString,
 
−
      mfrBundleFragmentation
 
−
        INTEGER,
 
−
      mfrBundleMaxFragSize
 
−
        Integer32,
 
−
      mfrBundleTimerHello
 
−
        INTEGER,
 
  
 +
  SYNTAX  SnmpAdminString
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Name of bundle link received from far end."
 +
  REFERENCE "FRF.16 section 3.4.2"
 +
  ::= { mfrBundleLinkEntry 5 }
  
 +
mfrBundleLinkFarEndBundleName OBJECT-TYPE
 +
  SYNTAX  SnmpAdminString
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Name of far end bundle for this link received from far end."
 +
  REFERENCE "FRF.16 section 3.4.1"
 +
  ::= { mfrBundleLinkEntry 6 }
  
 +
mfrBundleLinkDelay OBJECT-TYPE
 +
  SYNTAX  Integer32 (-1..2147483647)
 +
  UNITS "Milliseconds"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Current round-trip delay for this bundle link.  The
 +
      value -1 is returned when an implementation does not
 +
      support measurement of the bundle link delay."
 +
  REFERENCE "FRF.16 section 3.4.4"
 +
  ::= { mfrBundleLinkEntry 7 }
  
 +
mfrBundleLinkFramesControlTx OBJECT-TYPE
 +
  SYNTAX  Counter32
 +
  UNITS "Frames"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "Number of MFR control frames sent."
 +
  REFERENCE "FRF.16 section 3.2"
 +
  ::= { mfrBundleLinkEntry 8 }
  
−
      mfrBundleTimerAck
+
mfrBundleLinkFramesControlRx OBJECT-TYPE
−
        INTEGER,
+
  SYNTAX  Counter32
−
      mfrBundleCountMaxRetry
+
  UNITS "Frames"
−
        INTEGER,
+
  MAX-ACCESS  read-only
−
      mfrBundleActivationClass
+
  STATUS  current
−
        INTEGER,
+
  DESCRIPTION
−
      mfrBundleThreshold
+
       "Number of valid MFR control frames received."
−
        Integer32,
+
  REFERENCE "FRF.16 section 3.2"
−
       mfrBundleMaxDiffDelay
+
  ::= { mfrBundleLinkEntry 9 }
−
        Integer32,
+
 
−
      mfrBundleSeqNumSize
+
mfrBundleLinkFramesControlInvalid OBJECT-TYPE
−
        INTEGER,
+
  SYNTAX  Counter32
−
      mfrBundleMaxBundleLinks
+
  UNITS "Frames"
−
        Integer32,
+
  MAX-ACCESS  read-only
−
      mfrBundleLinksConfigured
+
  STATUS  current
−
        Integer32,
+
  DESCRIPTION
−
      mfrBundleLinksActive
+
       "The number of invalid MFR control frames received."
−
        Integer32,
+
  REFERENCE "FRF.16 section 3.2"
−
      mfrBundleBandwidth
+
  ::= { mfrBundleLinkEntry 10 }
−
        Integer32,
 
−
      mfrBundleFarEndName
 
−
        SnmpAdminString,
 
−
       mfrBundleResequencingErrors
 
−
        Counter32
 
−
      }
 
  
−
mfrBundleIndex OBJECT-TYPE
+
mfrBundleLinkTimerExpiredCount OBJECT-TYPE
−
   SYNTAX  Integer32 (1..2147483647)
+
   SYNTAX  Counter32
−
   MAX-ACCESS  not-accessible
+
  UNITS "Timer Expiration Events"
 +
   MAX-ACCESS  read-only
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "The index into the table. While this corresponds
+
       "Number of times the T_HELLO or T_ACK timers expired."
−
      to an entry in the ifTable, the value of mfrBundleIndex
+
  REFERENCE "FRF.16 section 4.3.8.1 and 4.3.8.2"
−
      need not match that of the ifIndex in the ifTable.
+
   ::= { mfrBundleLinkEntry 11 }
−
      A manager can use mfrBundleNextIndex to select a unique
 
−
      mfrBundleIndex for creating a new row."
 
−
   ::= { mfrBundleEntry 1 }
 
  
−
mfrBundleIfIndex OBJECT-TYPE
+
mfrBundleLinkLoopbackSuspected OBJECT-TYPE
−
   SYNTAX  InterfaceIndex
+
   SYNTAX  Counter32
 +
  UNITS "Loopback Suspected Events"
 
   MAX-ACCESS  read-only
 
   MAX-ACCESS  read-only
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "The value must match an entry in the interface
+
       "The number of times a loopback has been suspected
−
       table whose ifType must be set to frf16MfrBundle(163).
+
       (based upon the use of magic numbers)."
−
 
+
  REFERENCE "FRF.16 section 4.3.7"
−
      For example: if the value of mfrBundleIfIndex is 10,
+
  ::= { mfrBundleLinkEntry 12 }
−
      then a corresponding entry should be present in
 
−
 
 
−
 
 
  
 +
mfrBundleLinkUnexpectedSequence OBJECT-TYPE
 +
  SYNTAX  Counter32
 +
  UNITS "Frames"
 +
  MAX-ACCESS  read-only
 +
  STATUS  current
 +
  DESCRIPTION
 +
      "The number of data MFR frames discarded because the sequence
 +
      number of the frame for a DLCI was less than (delayed frame)
 +
      or equal to (duplicate frame) the one expected for that DLCI.
  
 +
      Example:
 +
      Say frames with sequence numbers 56, 58, 59 is received for
 +
      DLCI 100.  While waiting for sequence number 57 another frame
 +
      with sequence number 58 arrives.  Frame 58 is discarded and
 +
      the counter is incremented."
 +
  REFERENCE "FRF.16 section 4.2.3.2"
 +
  ::= { mfrBundleLinkEntry 13 }
  
−
      the ifTable with an index of 10 and an ifType of 163."
+
mfrBundleLinkMismatch OBJECT-TYPE
−
  ::= { mfrBundleEntry 2 }
+
   SYNTAX  Counter32
−
 
+
  UNITS "Bundle Name Mismatch Events"
−
mfrBundleRowStatus OBJECT-TYPE
+
   MAX-ACCESS  read-only
−
   SYNTAX  RowStatus
 
−
   MAX-ACCESS  read-create
 
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
      "The mfrBundleRowStatus object allows create, change,
+
      "The number of times that the unit has been notified by the
−
        and delete operations on bundle entries."
+
      remote peer that the bundle name is inconsistent with other
−
   REFERENCE "[[RFC1903|RFC 1903]]"
+
      bundle links attached to the far-end bundle."
−
   ::= { mfrBundleEntry 3 }
+
   REFERENCE "FRF.16 section 4.3.2.4"
 +
   ::= { mfrBundleLinkEntry 14 }
  
−
mfrBundleNearEndName OBJECT-TYPE
+
-- ---------------------------------------------------------
−
  SYNTAX  SnmpAdminString
+
-- ---------------------------------------------------------
−
  MAX-ACCESS  read-create
+
-- Notifications/Traps
−
  STATUS  current
+
-- ---------------------------------------------------------
−
  DESCRIPTION
+
-- ---------------------------------------------------------
−
      "The configured name of the bundle."
 
−
  REFERENCE "FRF.16 section 3.4.1"
 
−
  ::= { mfrBundleEntry 4 }
 
  
−
mfrBundleFragmentation OBJECT-TYPE
+
mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE
−
   SYNTAX  INTEGER {
+
   OBJECTS {
−
       enable  (1),
+
       mfrBundleNearEndName,
−
       disable (2)
+
       mfrBundleFarEndName,
 +
      mfrBundleLinkNearEndName,
 +
      mfrBundleLinkFarEndName,
 +
      mfrBundleLinkFarEndBundleName
 
       }
 
       }
−
  MAX-ACCESS  read-create
 
 
   STATUS  current
 
   STATUS  current
 
   DESCRIPTION
 
   DESCRIPTION
−
       "Controls whether the bundle performs/accepts
+
       "This trap indicates that a bundle link mismatch has
−
       fragmentation and re-assembly.  The possible
+
       been detected.  The following objects are reported:
−
      values are:
 
  
−
       enable(1) - Bundle links will fragment frames
+
       mfrBundleNearEndName:    configured name of near end bundle
  
−
       disable(2) - Bundle links will not fragment
+
       mfrBundleFarEndName:    previously reported name of
−
                  frames."
+
                            far end bundle
−
  DEFVAL { disable }
 
−
  ::= { mfrBundleEntry 5 }
 
  
−
mfrBundleMaxFragSize OBJECT-TYPE
+
      mfrBundleLinkNearEndName: configured name of near end bundle
−
  SYNTAX  Integer32 (-1..8184)
 
−
  UNITS "Octets"
 
−
  MAX-ACCESS  read-create
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The maximum fragment size supported.  Note that this
 
  
 +
      mfrBundleLinkFarEndName: reported name of far end bundle
  
 +
      mfrBundleLinkFarEndBundleName: currently reported name of
 +
                            far end bundle
  
 +
      Note: that the configured items may have been configured
 +
            automatically.
  
 +
      Note: The mfrBundleLinkMismatch counter is incremented when
 +
            the trap is sent."
  
−
      is only valid if mfrBundleFragmentation is set to enable(1).
+
  REFERENCE "FRF.16 section 4.3.2.4"
 +
    ::= { mfrMibTrapsPrefix 1 }
  
−
      Zero is not a valid fragment size.
+
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
 +
-- Conformance/Compliance
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
−
      A bundle that does not support fragmentation must return
+
mfrMibCompliance MODULE-COMPLIANCE
−
      this object with a value of -1."
+
   STATUS     current
−
  DEFVAL { -1 }
 
−
  ::= { mfrBundleEntry 6 }
 
−
 
 
−
mfrBundleTimerHello OBJECT-TYPE
 
−
  SYNTAX  INTEGER (1..180)
 
−
  UNITS "Seconds"
 
−
  MAX-ACCESS  read-create
 
−
   STATUS current
 
 
   DESCRIPTION
 
   DESCRIPTION
−
       "The configured MFR Hello Timer value."
+
       "The compliance statement for equipment that implements
−
  REFERENCE "FRF.16 section 4.3.8.1"
+
      the FRF16 MIB. All of the current groups are mandatory,
−
   DEFVAL { 10 }
+
      but a number of objects may be read-only if the
−
   ::= { mfrBundleEntry 7 }
+
      implementation does not allow configuration."
 +
   MODULE -- this module
 +
   MANDATORY-GROUPS {
 +
      mfrMibBundleGroup,
 +
      mfrMibBundleLinkGroup,
 +
      mfrMibTrapGroup
 +
      }
  
−
mfrBundleTimerAck OBJECT-TYPE
+
  OBJECT     mfrBundleFragmentation
−
  SYNTAX  INTEGER (1..10)
+
   MIN-ACCESS read-only
−
  UNITS "Seconds"
 
−
   MAX-ACCESS read-create
 
−
  STATUS  current
 
 
   DESCRIPTION
 
   DESCRIPTION
−
      "The configured MFR T_ACK value."
+
      "Write access is not required, but the value used must be
−
  REFERENCE "FRF.16 section 4.3.8.2"
+
        reported."
−
  DEFVAL { 4 }
 
−
  ::= { mfrBundleEntry 8 }
 
  
−
mfrBundleCountMaxRetry OBJECT-TYPE
+
  OBJECT     mfrBundleMaxFragSize
−
   SYNTAX  INTEGER (1..5)
+
  MIN-ACCESS read-only
−
   MAX-ACCESS read-create
+
   DESCRIPTION
−
  STATUS  current
+
      "Write access is not required, but the value used must be
 +
        reported.
 +
        A value of -1 indicates that the value is not applicable."
 +
 
 +
  OBJECT    mfrBundleThreshold
 +
   MIN-ACCESS read-only
 
   DESCRIPTION
 
   DESCRIPTION
−
      "The MFR N_MAX_RETRY value."
+
      "Write access is not required, but the value used must be
−
  REFERENCE "FRF.16 section 4.3.8.3"
+
        reported.
−
  DEFVAL { 2 }
+
        A value of -1 indicates that the value is not applicable."
−
  ::= { mfrBundleEntry 9 }
 
  
−
mfrBundleActivationClass OBJECT-TYPE
+
  OBJECT     mfrBundleMaxDiffDelay
−
   SYNTAX  INTEGER {
+
  MIN-ACCESS read-only
−
      mfrBundleActivationClassA (1),
+
   DESCRIPTION
−
      mfrBundleActivationClassB (2),
+
      "Write access is not required, but the value used must be
−
      mfrBundleActivationClassC (3),
+
        reported."
−
      mfrBundleActivationClassD (4)
 
−
      }
 
  
 +
  OBJECT    mfrBundleSeqNumSize
 +
  MIN-ACCESS read-only
 +
  DESCRIPTION
 +
      "Write access is not required, but the value used must be
 +
        reported.
 +
        A value of -1 indicates that the value is not applicable."
  
 +
  ::= { mfrMibCompliances 1 }
  
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
 +
-- Units of Conformance
 +
-- ---------------------------------------------------------
 +
-- ---------------------------------------------------------
  
−
 
+
mfrMibBundleGroup OBJECT-GROUP
−
   MAX-ACCESS  read-create
+
   OBJECTS {
−
  STATUS  current
+
      mfrBundleMaxNumBundles,
−
  DESCRIPTION
+
      mfrBundleNextIndex,
−
       "Controls the conditions under which the bundle is activated.
+
      mfrBundleIfIndex,
−
      The following settings are available:
+
       mfrBundleRowStatus,
−
 
+
      mfrBundleNearEndName,
−
          mfrBundleActivationClassA(1) - at least one must link up
+
      mfrBundleFragmentation,
−
          mfrBundleActivationClassB(2) - all links must be up
+
      mfrBundleMaxFragSize,
−
          mfrBundleActivationClassC(3) - a certain number must be
+
      mfrBundleTimerHello,
−
                                        up.  Refer to
+
      mfrBundleTimerAck,
−
                                        mfrBundleThreshold for
+
      mfrBundleCountMaxRetry,
−
                                        the required number.
+
      mfrBundleActivationClass,
−
          mfrBundleActivationClassD(4) - custom (implementation
+
      mfrBundleThreshold,
−
                                        specific)."
+
      mfrBundleMaxDiffDelay,
−
  REFERENCE "FRF.16 section 4.2.2.1"
+
      mfrBundleMaxBundleLinks,
−
  DEFVAL { mfrBundleActivationClassA }
+
      mfrBundleLinksConfigured,
−
  ::= { mfrBundleEntry 10 }
+
      mfrBundleLinksActive,
−
 
+
      mfrBundleBandwidth,
−
mfrBundleThreshold OBJECT-TYPE
+
      mfrBundleSeqNumSize,
−
  SYNTAX  Integer32 (-1..2147483647)
+
      mfrBundleFarEndName,
−
  UNITS "Bundle Links"
+
      mfrBundleResequencingErrors,
−
  MAX-ACCESS  read-create
+
      mfrBundleIfIndexMappingIndex
−
   STATUS current
+
      }
 +
   STATUS current
 
   DESCRIPTION
 
   DESCRIPTION
−
      "Specifies the number of links that must be in operational
+
      "Group of objects describing bundles."
−
      'up' state before the bundle will transition to an
+
  ::= { mfrMibGroups 1 }
−
      operational up/active state. If the number of
 
−
      operational 'up' links falls below this value,
 
−
      then the bundle will transition to an inactive
 
−
      state.
 
  
−
      Note - this is only valid when mfrBundleActivationClass
+
mfrMibBundleLinkGroup  OBJECT-GROUP
−
      is set to mfrBundleActivationClassC or, depending upon the
+
   OBJECTS {
−
      implementation, to mfrBundleActivationClassD.  A bundle that
+
      mfrBundleLinkRowStatus,
−
      is not set to one of these must return this object with a
 
−
      value of -1."
 
−
   REFERENCE "FRF.16 section 4.2.2.1"
 
−
  DEFVAL { -1 }
 
−
  ::= { mfrBundleEntry 11 }
 
  
−
mfrBundleMaxDiffDelay OBJECT-TYPE
+
      mfrBundleLinkConfigBundleIndex,
−
  SYNTAX  Integer32 (-1..2147483647)
+
      mfrBundleLinkNearEndName,
−
  UNITS "Milliseconds"
+
      mfrBundleLinkState,
−
  MAX-ACCESS  read-create
+
      mfrBundleLinkFarEndName,
−
   STATUS current
+
      mfrBundleLinkFarEndBundleName,
 +
      mfrBundleLinkDelay,
 +
      mfrBundleLinkFramesControlTx,
 +
      mfrBundleLinkFramesControlRx,
 +
      mfrBundleLinkFramesControlInvalid,
 +
      mfrBundleLinkTimerExpiredCount,
 +
      mfrBundleLinkLoopbackSuspected,
 +
      mfrBundleLinkUnexpectedSequence,
 +
      mfrBundleLinkMismatch
 +
      }
 +
   STATUS current
 
   DESCRIPTION
 
   DESCRIPTION
−
      "The maximum delay difference between the bundle
+
      "Group of objects describing bundle links."
−
      links.
+
  ::= { mfrMibGroups 2 }
  
−
 
+
mfrMibTrapGroup NOTIFICATION-GROUP
−
 
+
   NOTIFICATIONS {
−
 
 
−
 
 
−
      A value of -1 indicates that this object does not contain
 
−
      a valid value"
 
−
  DEFVAL { -1 }
 
−
  ::= { mfrBundleEntry 12 }
 
−
 
 
−
mfrBundleSeqNumSize OBJECT-TYPE
 
−
  SYNTAX  INTEGER {
 
−
      seqNumSize12bit (1),
 
−
      seqNumSize24bit (2)
 
−
      }
 
−
  MAX-ACCESS  read-create
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Controls whether the standard FRF.12 12-bit
 
−
      sequence number is used or the optional 24-bit
 
−
      sequence number."
 
−
  REFERENCE "FRFTC/99-194"
 
−
  DEFVAL { seqNumSize12bit }
 
−
  ::= { mfrBundleEntry 13 }
 
−
 
 
−
mfrBundleMaxBundleLinks OBJECT-TYPE
 
−
  SYNTAX  Integer32 (1..2147483647)
 
−
  UNITS "Bundle Links"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The maximum number of bundle links supported for
 
−
      this bundle."
 
−
  ::= { mfrBundleEntry 14 }
 
−
 
 
−
mfrBundleLinksConfigured OBJECT-TYPE
 
−
  SYNTAX  Integer32 (1..2147483647)
 
−
  UNITS "Bundle Links"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The number of links configured for the bundle."
 
−
  ::= {  mfrBundleEntry 15 }
 
−
 
 
−
mfrBundleLinksActive OBJECT-TYPE
 
−
  SYNTAX  Integer32 (-1..2147483647)
 
−
  UNITS "Bundle Links"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The number of links that are active."
 
−
  ::= {  mfrBundleEntry 16 }
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
mfrBundleBandwidth OBJECT-TYPE
 
−
    SYNTAX  Integer32
 
−
    UNITS "Bits/Sec"
 
−
    MAX-ACCESS  read-only
 
−
    STATUS  current
 
−
    DESCRIPTION
 
−
      "The amount of available bandwidth on the bundle"
 
−
    ::= {  mfrBundleEntry 17 }
 
−
 
 
−
mfrBundleFarEndName OBJECT-TYPE
 
−
  SYNTAX  SnmpAdminString
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Name of the bundle received from the far end."
 
−
  REFERENCE "FRF.16 section 3.4.1"
 
−
  ::= { mfrBundleEntry 18 }
 
−
 
 
−
mfrBundleResequencingErrors OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Error Events"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "A count of the number of resequencing errors.  Each event
 
−
      may correspond to multiple lost frames.  Example:
 
−
      Say sequence number 56, 59 and 60 is received for DLCI 100.
 
−
      It is decided by some means that sequence 57 and 58 is lost.
 
−
      This counter should then be incremented by ONE, even though
 
−
      two frames were lost."
 
−
  ::= { mfrBundleEntry 19 }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- ifIndex Mapping to Bundle Index Table
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
mfrBundleIfIndexMappingTable OBJECT-TYPE
 
−
  SYNTAX  SEQUENCE OF MfrBundleIfIndexMappingEntry
 
−
  MAX-ACCESS  not-accessible
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "A table mapping the values of ifIndex to the
 
−
        mfrBundleIndex.  This is required in order to find
 
−
        the mfrBundleIndex given an ifIndex.  The mapping of
 
−
        mfrBundleIndex to ifIndex is provided by the
 
−
        mfrBundleIfIndex entry in the mfrBundleTable."
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
  ::= { mfrMibBundleObjects 4 }
 
−
 
 
−
mfrBundleIfIndexMappingEntry OBJECT-TYPE
 
−
  SYNTAX  MfrBundleIfIndexMappingEntry
 
−
  MAX-ACCESS  not-accessible
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
        "Each row describes one ifIndex to mfrBundleIndex mapping."
 
−
INDEX  { ifIndex }
 
−
::= { mfrBundleIfIndexMappingTable 1 }
 
−
 
 
−
MfrBundleIfIndexMappingEntry ::=
 
−
  SEQUENCE {
 
−
    mfrBundleIfIndexMappingIndex
 
−
        Integer32
 
−
    }
 
−
 
 
−
mfrBundleIfIndexMappingIndex OBJECT-TYPE
 
−
  SYNTAX  Integer32 (1..2147483647)
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
        "The mfrBundleIndex of the given ifIndex."
 
−
::= { mfrBundleIfIndexMappingEntry 2 }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- Bundle Link Table
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
mfrBundleLinkTable OBJECT-TYPE
 
−
  SYNTAX  SEQUENCE OF MfrBundleLinkEntry
 
−
  MAX-ACCESS  not-accessible
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The bundle link configuration and status table.  There
 
−
      is a one-to-one correspondence between a bundle link
 
−
      and a physical interface represented in the ifTable.  The
 
−
      ifIndex of the physical interface is used to index the
 
−
      bundle link table, and to create rows.
 
−
 
 
−
      The following objects of the ifTable have specific
 
−
      meaning for an MFR bundle link:
 
−
 
 
−
          ifAdminStatus  - the bundle link admin status
 
−
          ifOperStatus  - the bundle link operational
 
−
                          status
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
          ifSpeed        - the bandwidth of the bundle
 
−
                          link interface
 
−
          ifInUcastPkts  - the number of frames received
 
−
                          on the bundle link
 
−
          ifOutUcastPkts - the number of frames transmitted
 
−
                          on the bundle link
 
−
          ifInErrors    - frame and fragment errors
 
−
          ifOutErrors    - frame and fragment errors"
 
−
  ::= { mfrMibBundleLinkObjects 1 }
 
−
 
 
−
mfrBundleLinkEntry OBJECT-TYPE
 
−
  SYNTAX  MfrBundleLinkEntry
 
−
  MAX-ACCESS  not-accessible
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "An entry in the bundle link table."
 
−
  INDEX  { ifIndex }
 
−
  ::= { mfrBundleLinkTable 1 }
 
−
 
 
−
MfrBundleLinkEntry ::=
 
−
  SEQUENCE {
 
−
      mfrBundleLinkRowStatus
 
−
        RowStatus,
 
−
      mfrBundleLinkConfigBundleIndex
 
−
        Integer32,
 
−
      mfrBundleLinkNearEndName
 
−
        SnmpAdminString,
 
−
      mfrBundleLinkState
 
−
        MfrBundleLinkState,
 
−
      mfrBundleLinkFarEndName
 
−
        SnmpAdminString,
 
−
      mfrBundleLinkFarEndBundleName
 
−
        SnmpAdminString,
 
−
      mfrBundleLinkDelay
 
−
        Integer32,
 
−
      mfrBundleLinkFramesControlTx
 
−
        Counter32,
 
−
      mfrBundleLinkFramesControlRx
 
−
        Counter32,
 
−
      mfrBundleLinkFramesControlInvalid
 
−
        Counter32,
 
−
      mfrBundleLinkTimerExpiredCount
 
−
        Counter32,
 
−
      mfrBundleLinkLoopbackSuspected
 
−
        Counter32,
 
−
      mfrBundleLinkUnexpectedSequence
 
−
        Counter32,
 
−
      mfrBundleLinkMismatch
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
        Counter32
 
−
      }
 
−
 
 
−
mfrBundleLinkRowStatus OBJECT-TYPE
 
−
  SYNTAX  RowStatus
 
−
  MAX-ACCESS  read-create
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The mfrBundleLinkRowStatus object allows create, change,
 
−
      and delete operations on mfrBundleLink entries.
 
−
 
 
−
      The create operation must fail if no physical interface
 
−
      is associated with the bundle link."
 
−
  ::= { mfrBundleLinkEntry 1 }
 
−
 
 
−
mfrBundleLinkConfigBundleIndex OBJECT-TYPE
 
−
  SYNTAX  Integer32 (1..2147483647)
 
−
  MAX-ACCESS  read-create
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The mfrBundleLinkConfigBundleIndex object allows
 
−
      the manager to control the bundle to which the bundle
 
−
      link is assigned.  If no value were in this field, then
 
−
      the bundle would remain in NOT_READY rowStatus and be
 
−
      unable to go to active.  With an appropriate mfrBundleIndex
 
−
      in this field, then we could put the mfrBundleLink row in
 
−
      NOT_IN_SERVICE or ACTIVE rowStatus."
 
−
  ::= { mfrBundleLinkEntry 2 }
 
−
 
 
−
mfrBundleLinkNearEndName OBJECT-TYPE
 
−
  SYNTAX  SnmpAdminString
 
−
  MAX-ACCESS  read-create
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The configured bundle link name that is sent to the far end."
 
−
  ::= { mfrBundleLinkEntry 3 }
 
−
 
 
−
mfrBundleLinkState OBJECT-TYPE
 
−
  SYNTAX  MfrBundleLinkState
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Current bundle link state as defined by the MFR protocol
 
−
      described in Annex A of FRF.16."
 
−
  REFERENCE "FRF.16 Annex A"
 
−
  ::= { mfrBundleLinkEntry 4 }
 
−
 
 
−
mfrBundleLinkFarEndName OBJECT-TYPE
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
  SYNTAX  SnmpAdminString
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Name of bundle link received from far end."
 
−
  REFERENCE "FRF.16 section 3.4.2"
 
−
  ::= { mfrBundleLinkEntry 5 }
 
−
 
 
−
mfrBundleLinkFarEndBundleName OBJECT-TYPE
 
−
  SYNTAX  SnmpAdminString
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Name of far end bundle for this link received from far end."
 
−
  REFERENCE "FRF.16 section 3.4.1"
 
−
  ::= { mfrBundleLinkEntry 6 }
 
−
 
 
−
mfrBundleLinkDelay OBJECT-TYPE
 
−
  SYNTAX  Integer32 (-1..2147483647)
 
−
  UNITS "Milliseconds"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Current round-trip delay for this bundle link.  The
 
−
      value -1 is returned when an implementation does not
 
−
      support measurement of the bundle link delay."
 
−
  REFERENCE "FRF.16 section 3.4.4"
 
−
  ::= { mfrBundleLinkEntry 7 }
 
−
 
 
−
mfrBundleLinkFramesControlTx OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Frames"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Number of MFR control frames sent."
 
−
  REFERENCE "FRF.16 section 3.2"
 
−
  ::= { mfrBundleLinkEntry 8 }
 
−
 
 
−
mfrBundleLinkFramesControlRx OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Frames"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Number of valid MFR control frames received."
 
−
  REFERENCE "FRF.16 section 3.2"
 
−
  ::= { mfrBundleLinkEntry 9 }
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
mfrBundleLinkFramesControlInvalid OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Frames"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The number of invalid MFR control frames received."
 
−
  REFERENCE "FRF.16 section 3.2"
 
−
  ::= { mfrBundleLinkEntry 10 }
 
−
 
 
−
mfrBundleLinkTimerExpiredCount OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Timer Expiration Events"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "Number of times the T_HELLO or T_ACK timers expired."
 
−
  REFERENCE "FRF.16 section 4.3.8.1 and 4.3.8.2"
 
−
  ::= { mfrBundleLinkEntry 11 }
 
−
 
 
−
mfrBundleLinkLoopbackSuspected OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Loopback Suspected Events"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The number of times a loopback has been suspected
 
−
      (based upon the use of magic numbers)."
 
−
  REFERENCE "FRF.16 section 4.3.7"
 
−
  ::= { mfrBundleLinkEntry 12 }
 
−
 
 
−
mfrBundleLinkUnexpectedSequence OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Frames"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The number of data MFR frames discarded because the sequence
 
−
      number of the frame for a DLCI was less than (delayed frame)
 
−
      or equal to (duplicate frame) the one expected for that DLCI.
 
−
 
 
−
      Example:
 
−
      Say frames with sequence numbers 56, 58, 59 is received for
 
−
      DLCI 100.  While waiting for sequence number 57 another frame
 
−
      with sequence number 58 arrives.  Frame 58 is discarded and
 
−
      the counter is incremented."
 
−
  REFERENCE "FRF.16 section 4.2.3.2"
 
−
  ::= { mfrBundleLinkEntry 13 }
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
mfrBundleLinkMismatch OBJECT-TYPE
 
−
  SYNTAX  Counter32
 
−
  UNITS "Bundle Name Mismatch Events"
 
−
  MAX-ACCESS  read-only
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "The number of times that the unit has been notified by the
 
−
      remote peer that the bundle name is inconsistent with other
 
−
      bundle links attached to the far-end bundle."
 
−
  REFERENCE "FRF.16 section 4.3.2.4"
 
−
  ::= { mfrBundleLinkEntry 14 }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- Notifications/Traps
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE
 
−
  OBJECTS {
 
−
      mfrBundleNearEndName,
 
−
      mfrBundleFarEndName,
 
−
      mfrBundleLinkNearEndName,
 
−
      mfrBundleLinkFarEndName,
 
−
      mfrBundleLinkFarEndBundleName
 
−
      }
 
−
  STATUS  current
 
−
  DESCRIPTION
 
−
      "This trap indicates that a bundle link mismatch has
 
−
      been detected.  The following objects are reported:
 
−
 
 
−
      mfrBundleNearEndName:    configured name of near end bundle
 
−
 
 
−
      mfrBundleFarEndName:    previously reported name of
 
−
                            far end bundle
 
−
 
 
−
      mfrBundleLinkNearEndName: configured name of near end bundle
 
−
 
 
−
      mfrBundleLinkFarEndName: reported name of far end bundle
 
−
 
 
−
      mfrBundleLinkFarEndBundleName: currently reported name of
 
−
                            far end bundle
 
−
 
 
−
      Note: that the configured items may have been configured
 
−
            automatically.
 
−
 
 
−
      Note: The mfrBundleLinkMismatch counter is incremented when
 
−
            the trap is sent."
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
  REFERENCE "FRF.16 section 4.3.2.4"
 
−
    ::= { mfrMibTrapsPrefix 1 }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- Conformance/Compliance
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
mfrMibCompliance MODULE-COMPLIANCE
 
−
  STATUS      current
 
−
  DESCRIPTION
 
−
      "The compliance statement for equipment that implements
 
−
      the FRF16 MIB.  All of the current groups are mandatory,
 
−
      but a number of objects may be read-only if the
 
−
      implementation does not allow configuration."
 
−
  MODULE -- this module
 
−
  MANDATORY-GROUPS {
 
−
      mfrMibBundleGroup,
 
−
      mfrMibBundleLinkGroup,
 
−
      mfrMibTrapGroup
 
−
      }
 
−
 
 
−
  OBJECT    mfrBundleFragmentation
 
−
  MIN-ACCESS read-only
 
−
  DESCRIPTION
 
−
      "Write access is not required, but the value used must be
 
−
        reported."
 
−
 
 
−
  OBJECT    mfrBundleMaxFragSize
 
−
  MIN-ACCESS read-only
 
−
  DESCRIPTION
 
−
      "Write access is not required, but the value used must be
 
−
        reported.
 
−
        A value of -1 indicates that the value is not applicable."
 
−
 
 
−
  OBJECT    mfrBundleThreshold
 
−
  MIN-ACCESS read-only
 
−
  DESCRIPTION
 
−
      "Write access is not required, but the value used must be
 
−
        reported.
 
−
        A value of -1 indicates that the value is not applicable."
 
−
 
 
−
  OBJECT    mfrBundleMaxDiffDelay
 
−
  MIN-ACCESS read-only
 
−
  DESCRIPTION
 
−
      "Write access is not required, but the value used must be
 
−
        reported."
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
  OBJECT    mfrBundleSeqNumSize
 
−
  MIN-ACCESS read-only
 
−
  DESCRIPTION
 
−
      "Write access is not required, but the value used must be
 
−
        reported.
 
−
        A value of -1 indicates that the value is not applicable."
 
−
 
 
−
  ::= { mfrMibCompliances 1 }
 
−
 
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
-- Units of Conformance
 
−
-- ---------------------------------------------------------
 
−
-- ---------------------------------------------------------
 
−
 
 
−
 
 
−
mfrMibBundleGroup OBJECT-GROUP
 
−
  OBJECTS {
 
−
      mfrBundleMaxNumBundles,
 
−
      mfrBundleNextIndex,
 
−
      mfrBundleIfIndex,
 
−
      mfrBundleRowStatus,
 
−
      mfrBundleNearEndName,
 
−
      mfrBundleFragmentation,
 
−
      mfrBundleMaxFragSize,
 
−
      mfrBundleTimerHello,
 
−
      mfrBundleTimerAck,
 
−
      mfrBundleCountMaxRetry,
 
−
      mfrBundleActivationClass,
 
−
      mfrBundleThreshold,
 
−
      mfrBundleMaxDiffDelay,
 
−
      mfrBundleMaxBundleLinks,
 
−
      mfrBundleLinksConfigured,
 
−
      mfrBundleLinksActive,
 
−
      mfrBundleBandwidth,
 
−
      mfrBundleSeqNumSize,
 
−
      mfrBundleFarEndName,
 
−
      mfrBundleResequencingErrors,
 
−
      mfrBundleIfIndexMappingIndex
 
−
      }
 
−
  STATUS current
 
−
  DESCRIPTION
 
−
      "Group of objects describing bundles."
 
−
  ::= { mfrMibGroups 1 }
 
−
 
 
−
mfrMibBundleLinkGroup  OBJECT-GROUP
 
−
  OBJECTS {
 
−
      mfrBundleLinkRowStatus,
 
−
 
 
−
 
 
−
 
 
−
 
 
−
 
 
−
      mfrBundleLinkConfigBundleIndex,
 
−
      mfrBundleLinkNearEndName,
 
−
      mfrBundleLinkState,
 
−
      mfrBundleLinkFarEndName,
 
−
      mfrBundleLinkFarEndBundleName,
 
−
      mfrBundleLinkDelay,
 
−
      mfrBundleLinkFramesControlTx,
 
−
      mfrBundleLinkFramesControlRx,
 
−
      mfrBundleLinkFramesControlInvalid,
 
−
      mfrBundleLinkTimerExpiredCount,
 
−
      mfrBundleLinkLoopbackSuspected,
 
−
      mfrBundleLinkUnexpectedSequence,
 
−
      mfrBundleLinkMismatch
 
−
      }
 
−
  STATUS current
 
−
  DESCRIPTION
 
−
      "Group of objects describing bundle links."
 
−
  ::= { mfrMibGroups 2 }
 
−
 
 
−
mfrMibTrapGroup NOTIFICATION-GROUP
 
−
   NOTIFICATIONS {
 
 
       mfrMibTrapBundleLinkMismatch
 
       mfrMibTrapBundleLinkMismatch
 
       }
 
       }
Line 1,579: Line 1,444:
 
END
 
END
  
 +
== Acknowledgments ==
 +
 +
This document was produced by the Frame Relay Service MIB (frnetmib)
 +
Working Group in conjunction with the Frame Relay Forum.
 +
 +
== References ==
  
 +
[RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture
 +
          for Describing SNMP Management Frameworks", RFC 2571, April
 +
          1999.
  
 +
[RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification
 +
          of Management Information for TCP/IP-based Internets", STD
 +
          16, RFC 1155, May 1990.
  
 +
[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD
 +
          16, RFC 1212, March 1991.
  
 +
[RFC1215] Rose, M., "A Convention for Defining Traps for use with the
 +
          SNMP", RFC 1215, March 1991.
  
 +
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
 +
          Rose, M. and S. Waldbusser, "Structure of Management
 +
          Information Version 2 (SMIv2)", STD 58, RFC 2578, April
 +
          1999.
  
 +
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
 +
          Rose, M. and S. Waldbusser, "Textual Conventions for
 +
          SMIv2", STD 58, RFC 2579, April 1999.
  
 +
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
 +
          Rose, M. and S. Waldbusser, "Conformance Statements for
 +
          SMIv2", STD 58, RFC 2580, April 1999.
  
 +
[RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple
 +
          Network Management Protocol", STD 15, RFC 1157, May 1990.
  
 +
[RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
 +
          "Introduction to Community-based SNMPv2", RFC 1901, January
 +
          1996.
  
 +
[RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
 +
          "Transport Mappings for Version 2 of the Simple Network
 +
          Management Protocol (SNMPv2)", RFC 1906, January 1996.
  
 +
[RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message
 +
          Processing and Dispatching for the Simple Network
 +
          Management Protocol (SNMP)", RFC 2572, April 1999.
  
 +
[RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model
 +
          (USM) for version 3 of the Simple Network Management
 +
          Protocol (SNMPv3)", RFC 2574, April 1999.
  
 +
[RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
 +
          "Protocol Operations for Version 2 of the Simple Network
 +
          Management Protocol (SNMPv2)", RFC 1905, January 1996.
  
 +
[RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications",
 +
          RFC 2573, April 1999.
  
 +
[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based
 +
          Access Control Model (VACM) for the Simple Network
 +
          Management Protocol (SNMP)", RFC 2575, April 1999.
  
 +
[RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart,
 +
          "Introduction to Version 3 of the Internet-standard Network
 +
          Management Framework", RFC 2570, April 1999.
  
 +
[Q.922]  ITU-T, Recommendation Q.922: "ISDN Data Link Layer
 +
          Specification For Frame Mode Bearer Services"
  
 +
[Q.933]  ITU-T, Recommendation Q.933: "Signalling Specification For
 +
          Frame Mode Basic Call Control"
  
 +
[FRF.4]  R. Cherukuri (ed), FRF.4: "Frame Relay User-to-Network SVC
 +
          Implementation Agreement" January 5, 1994.
  
 +
[FRF.16]  M. Sheehan (ed), FRF.16: "UNI/NNI Multilink Frame Relay
 +
          Interworking Implementation Agreement" August 20, 1999.
  
 +
[RFC1604] Rehbehn, K. and D. Fowler, "Definitions of Managed Objects
 +
          for Frame Relay Service", RFC 2954, October 2000.
  
 +
[RFC2494] Fowler, D., "Definitions of Managed Objects for the DS0 and
 +
          DS0 Bundle Interface Type", RFC 2494, November 1997.
  
−
== Acknowledgments ==
+
[RFC2863] McCloghrie, D. and F. Kastenholz, "The Interfaces Group MIB
−
 
+
          using SMIv2", RFC 2233, June 2000.
−
This document was produced by the Frame Relay Service MIB (frnetmib)
 
−
Working Group in conjunction with the Frame Relay Forum.
 
−
 
 
−
== References ==
 
−
 
 
−
[RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture          for Describing SNMP Management Frameworks", [[RFC2571|RFC 2571]], April          1999.
 
−
[RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification          of Management Information for TCP/IP-based Internets", STD          16, [[RFC1155|RFC 1155]], May 1990.
 
−
[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD          16, [[RFC1212|RFC 1212]], March 1991.
 
−
[RFC1215] Rose, M., "A Convention for Defining Traps for use with the          SNMP", [[RFC1215|RFC 1215]], March 1991.
 
−
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,          Rose, M. and S. Waldbusser, "Structure of Management          Information Version 2 (SMIv2)", STD 58, [[RFC2578|RFC 2578]], April          1999.
 
−
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,          Rose, M. and S. Waldbusser, "Textual Conventions for          SMIv2", STD 58, [[RFC2579|RFC 2579]], April 1999.
 
−
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,          Rose, M. and S. Waldbusser, "Conformance Statements for          SMIv2", STD 58, [[RFC2580|RFC 2580]], April 1999.
 
−
[RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple          Network Management Protocol", STD 15, [[RFC1157|RFC 1157]], May 1990.
 
−
[RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,          "Introduction to Community-based SNMPv2", [[RFC1901|RFC 1901]], January          1996.
 
−
[RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,          "Transport Mappings for Version 2 of the Simple Network          Management Protocol (SNMPv2)", [[RFC1906|RFC 1906]], January 1996.
 
−
[RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message          Processing and Dispatching for the Simple Network          Management Protocol (SNMP)", [[RFC2572|RFC 2572]], April 1999.
 
−
 
 
−
 
 
−
 
 
−
 
 
−
[RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model          (USM) for version 3 of the Simple Network Management          Protocol (SNMPv3)", [[RFC2574|RFC 2574]], April 1999.
 
−
[RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,          "Protocol Operations for Version 2 of the Simple Network          Management Protocol (SNMPv2)", [[RFC1905|RFC 1905]], January 1996.
 
−
[RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications",          [[RFC2573|RFC 2573]], April 1999.
 
−
[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based          Access Control Model (VACM) for the Simple Network          Management Protocol (SNMP)", [[RFC2575|RFC 2575]], April 1999.
 
−
[RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart,          "Introduction to Version 3 of the Internet-standard Network          Management Framework", [[RFC2570|RFC 2570]], April 1999.
 
−
[Q.922]  ITU-T, Recommendation Q.922: "ISDN Data Link Layer          Specification For Frame Mode Bearer Services"
 
−
[Q.933]  ITU-T, Recommendation Q.933: "Signalling Specification For          Frame Mode Basic Call Control"
 
−
[FRF.4]  R. Cherukuri (ed), FRF.4: "Frame Relay User-to-Network SVC          Implementation Agreement" January 5, 1994.
 
−
[FRF.16]  M. Sheehan (ed), FRF.16: "UNI/NNI Multilink Frame Relay          Interworking Implementation Agreement" August 20, 1999.
 
−
[RFC1604] Rehbehn, K. and D. Fowler, "Definitions of Managed Objects          for Frame Relay Service", [[RFC2954|RFC 2954]], October 2000.
 
−
[RFC2494] Fowler, D., "Definitions of Managed Objects for the DS0 and          DS0 Bundle Interface Type", [[RFC2494|RFC 2494]], November 1997.
 
−
[RFC2863] McCloghrie, D. and F. Kastenholz, "The Interfaces Group MIB         using SMIv2", [[RFC2233|RFC 2233]], June 2000.
 
−
[ATMLANE] T. Newton, ed., "LAN Emulation Client Management          Specification Version 2.0" AF-LANE-0093.000, ATM Forum,          October, 1998
 
−
[ATMIMA]  R. Vallee, ed., "Inverse Multiplexing for ATM Specification          Version 1.1" (Appendix A) AF-PHY-0086.001, ATM Forum,          March, 1999
 
  
 +
[ATMLANE] T. Newton, ed., "LAN Emulation Client Management
 +
          Specification Version 2.0" AF-LANE-0093.000, ATM Forum,
 +
          October, 1998
  
 +
[ATMIMA]  R. Vallee, ed., "Inverse Multiplexing for ATM Specification
 +
          Version 1.1" (Appendix A) AF-PHY-0086.001, ATM Forum,
 +
          March, 1999
  
 +
[RFC2115] Brown, C. and F. Baker, "Management Information Base for
 +
          Frame Relay DTEs Using SMIv2", RFC 2115, September 1997.
  
−
 
−
[RFC2115] Brown, C. and F. Baker, "Management Information Base for          Frame Relay DTEs Using SMIv2", [[RFC2115|RFC 2115]], September 1997.
 
 
== Security Considerations ==
 
== Security Considerations ==
  
Line 1,662: Line 1,562:
 
It is recommended that the implementers consider the security
 
It is recommended that the implementers consider the security
 
features as provided by the SNMPv3 framework.  Specifically, the use
 
features as provided by the SNMPv3 framework.  Specifically, the use
−
of the User-based Security Model [[RFC2574|RFC 2574]] [RFC2574] and the View-
+
of the User-based Security Model RFC 2574 [RFC2574] and the View-
−
based Access Control Model [[RFC2575|RFC 2575]] [RFC2575] is recommended.
+
based Access Control Model RFC 2575 [RFC2575] is recommended.
  
 
It is then a customer/user responsibility to ensure that the SNMP
 
It is then a customer/user responsibility to ensure that the SNMP
Line 1,670: Line 1,570:
 
(users) that have legitimate rights to indeed GET or SET
 
(users) that have legitimate rights to indeed GET or SET
 
(change/create/delete) them.
 
(change/create/delete) them.
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
  
 
== Authors' Addresses ==
 
== Authors' Addresses ==
Line 1,703: Line 1,580:
 
Phone: +1 919 558 2200
 
Phone: +1 919 558 2200
  
−
 
  
 
Bob Lynch
 
Bob Lynch
Line 1,712: Line 1,588:
 
Phone: +1 919 558-2200
 
Phone: +1 919 558-2200
  
−
 
  
 
Kenneth Rehbehn
 
Kenneth Rehbehn
Line 1,721: Line 1,596:
 
Phone: +1 301 529-4427
 
Phone: +1 301 529-4427
  
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
  
 
== Full Copyright Statement ==
 
== Full Copyright Statement ==
Line 1,779: Line 1,629:
 
Funding for the RFC Editor function is currently provided by the
 
Funding for the RFC Editor function is currently provided by the
 
Internet Society.
 
Internet Society.
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
 
−
[[Category:Standards Track]]
 

Revision as of 10:20, 24 September 2020

Network Working Group P. Pate Request for Comments: 3020 B. Lynch Category: Standards Track Overture Networks 

                                                          K. Rehbehn
                                               Megisto Systems, Inc.
                                                       December 2000

                 Definitions of Managed Objects
               for Monitoring and Controlling the
             UNI/NNI Multilink Frame Relay Function

Status of this Memo

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

Copyright Notice

Copyright (C) The Internet Society (2000). All Rights Reserved.

Abstract

This memo defines a Management Information Base (MIB) for monitoring and controlling a UNI/NNI Multilink Frame Relay Function as defined in Frame Relay Forum FRF.16. This MIB also includes conformance and notification information.

Table of Contents

1 The SNMP Management Framework ................................ 2 2 Overview ..................................................... 3 2.1 Multilink Frame Relay Background ........................... 3 2.1.1 Terminology .............................................. 4 2.1.2 Reference Model .......................................... 5 2.2 Structure of the MIB ....................................... 5 2.2.1 mfrBundleMaxNumBundles ................................... 6 2.2.2 mfrBundleNextIndex ....................................... 6 2.2.3 mfrBundleTable ........................................... 6 2.2.4 Bundle-to-ifIndex Mapping Table .......................... 6 2.2.5 mfrBundleLinkTable ....................................... 6 2.3 Relationship With Other MIBS and Tables .................... 7 2.3.1 Relationship With Interface Table ........................ 7 2.3.1.1 Bundle Links ........................................... 7 2.3.1.2 Bundles ................................................ 7

2.3.1.3 Mapping Between ifIndex and mfrBundleIndex ............. 8 2.3.1.4 ifTable Objects ........................................ 8 2.3.2 Relationship With Interface Stack Table .................. 9 2.3.3 Relationship With Frame Relay DTE MIB .................... 9 2.3.4 Relationship With Frame Relay Service MIB ................ 9 2.3.5 Example .................................................. 9 2.4 Creation Of Bundles and Bundle Links ....................... 11 2.4.1 Creation Of Bundles ...................................... 11 2.4.2 Creation Of Bundle Links ................................. 11 2.5 Notifications .............................................. 11 2.5.1 Bundle ................................................... 11 2.5.1.1 linkUp ................................................. 12 2.5.1.2 linkDown ............................................... 12 2.5.2 Bundle Link .............................................. 12 2.5.2.1 linkUp ................................................. 12 2.5.2.2 linkDown ............................................... 12 2.5.2.3 mfrMibTrapBundleLinkMismatch ........................... 12 3 Object Definitions ........................................... 13 4 Acknowledgments .............................................. 32 5 References ................................................... 32 6 Security Considerations ...................................... 34 7 Authors' Addresses ........................................... 35 8 Full Copyright Statement ..................................... 36

The SNMP Management Framework

The SNMP Management Framework presently consists of five major components:

o An overall architecture, described in RFC 2571 [RFC2571].

o Mechanisms for describing and naming objects and events for the 

  purpose of management.  The first version of this Structure of
  Management Information (SMI) is called SMIv1 and described in STD
  16, RFC 1155 [RFC1155], STD 16, RFC 1212 [RFC1212] and RFC 1215
  [RFC1215].  The second version, called SMIv2, is described in STD
  58: RFC 2578 [RFC2578], RFC 2579 [RFC2579] and RFC 2580 [RFC2580].

o Message protocols for transferring management information. The 

  first version of the SNMP message protocol is called SNMPv1 and
  described in STD 15, RFC 1157 [RFC1157].  A second version of the
  SNMP message protocol, which is not an Internet standards track
  protocol, is called SNMPv2c and described in RFC 1901 [RFC1901]
  and RFC 1906 [RFC1906].  The third version of the message protocol
  is called SNMPv3 and described in RFC 1906 [RFC1906], RFC 2572
  [RFC2572] and RFC 2574 [RFC2574].

o Protocol operations for accessing management information. The 

  first set of protocol operations and associated PDU formats is
  described in STD 15, RFC 1157 [RFC1157].  A second set of protocol
  operations and associated PDU formats is described in RFC 1905
  [RFC1905].

o A set of fundamental applications described in RFC 2573 [RFC2573] 

  and the view-based access control mechanism described in RFC 2575
  [RFC2575].

A more detailed introduction to the current SNMP Management Framework can be found in RFC 2570 [RFC2570].

Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the mechanisms defined in the SMI.

This memo specifies a MIB module that is compliant to the SMIv2. A MIB conforming to the SMIv1 can be produced through the appropriate translations. The resulting translated MIB must be semantically equivalent, except where objects or events are omitted because no translation is possible (use of Counter64). Some machine readable information in SMIv2 will be converted into textual descriptions in SMIv1 during the translation process. However, this loss of machine readable information is not considered to change the semantics of the MIB.

Overview

This document defines a Management Information Base (MIB) for monitoring and controlling the UNI/NNI Multilink Frame Relay function. The agreement on which this MIB is based was defined and documented by the Frame Relay Forum in the Frame Relay Forum Document FRF.16 [FRF.16].

Multilink Frame Relay Background

Multilink Frame Relay (MFR) for the User-to-Network Interface (UNI) and the Network-to-Network Interface (NNI) provides physical interface emulation for frame relay devices. The emulated physical interface consists of one or more physical links, called "bundle links", aggregated together into a single "bundle" of bandwidth. This service provides a frame-based inverse multiplexing function, sometimes referred to as an "IMUX".

The bundle provides the same order-preserving service as a physical layer for frames sent on a data link connection. In addition, the bundle provides support for all Frame Relay services based on UNI and NNI standards.

Terminology

Physical Link -- A single physical interface that interconnects 

                   two devices in a frame relay network (e.g., DS1,
                   DS0, Bearer channel, refer to FRF.14).

Bundle -- A grouping of one or more physical links using 

                   the formats and procedures of multilink frame
                   relay.  The bundle operates as a logical
                   interface function that emulates a single
                   physical interface to the Q.922 data link layer.

Bundle Link -- A MFR sub-component that controls operation of 

                   one of the bundle's physical links.

Reference Model

+--------------------------+ +--------------------------+ | Switching Layer -OR- | | Switching Layer -OR- | | Higher-Level Applications| | Higher-Level Applications| +--------------------------+ +--------------------------+ | |C-Plane - Q.933| | |C-Plane - Q.933| | U-Plane | (Note 1) | | U-Plane | (Note 1) | | (Note 3) |---------------| | (Note 3) |---------------| | |Q.922 (Note 2) | | |Q.922 (Note 2) | +--------------------------+ +--------------------------+ | Data Link Layer (Q.922) | | Data Link Layer (Q.922) | +--------------------------+ +--------------------------+ | Bundle (B) | | Bundle (B) | +--------------------------+ +--------------------------+ | Bundle | Bundle | Bundle | | Bundle | Bundle | Bundle | | Link | Link | Link | | Link | Link | Link | | (BL) | (BL) | (BL) | | (BL) | (BL) | (BL) | +--------+--------+--------+ +--------+--------+--------+ |Physical|Physical|Physical| |Physical|Physical|Physical| | (PH) | (PH) | (PH) | __________ | (PH) | (PH) | (PH) | +----+---+----+---+----+---+ /\ \ +----+---+----+---+----+---+ 

 |        |        |    /  \          \      |        |        |
 |        |        +--------\          \-----+        |        |
 |        |           /      \          \             |        |
 |        +-------------------\          \------------+        |
 |           _________\_______/  Bundle  /_                    |
 |          /\               /          /  \                   |
 +------------| Bundle Link /          /    |------------------+
            \/_____________/          /____/
                         \/__________/

               Figure 1: MFR Reference Diagram

Note 1: C-Plane operation as described in Q.933 [Q.933] and FRF.4 [FRF.4]

Note 2: Multiple frame acknowledged information transfer mode as described in Q.922 [Q.922]

Note 3: Core aspects for use with frame relay bearer service as described in Q.922, Annex A [Q.922]

Structure of the MIB

The UNI/NNI MFR managed objects consist of two scalar objects and three tables.

mfrBundleMaxNumBundles

This scalar is used to inform the manager of the maximum number of bundles supported by this device.

mfrBundleNextIndex

This scalar is used to assist the manager in selecting a value for mfrBundleIndex during row creation. It can also be used to avoid race conditions with multiple managers trying to create rows in the table (see RFC 2494 [RFC2494] for one such algorithm).

mfrBundleTable

This table provides a means to configure and monitor bundles. It is indexed by mfrBundleIndex and contains these columns: 

  -  mfrBundleIndex                    Integer32
  -  mfrBundleIfIndex                  InterfaceIndex
  -  mfrBundleRowStatus                RowStatus
  -  mfrBundleNearEndName              SnmpAdminString
  -  mfrBundleFragmentation            INTEGER
  -  mfrBundleMaxFragSize              Integer32
  -  mfrBundleTimerHello               INTEGER
  -  mfrBundleTimerAck                 INTEGER
  -  mfrBundleCountMaxRetry            INTEGER
  -  mfrBundleActivationClass          INTEGER
  -  mfrBundleThreshold                Integer32
  -  mfrBundleMaxDiffDelay             Integer32
  -  mfrBundleSeqNumSize               INTEGER
  -  mfrBundleLinksConfigured          Integer32
  -  mfrBundleLinksActive              Integer32
  -  mfrBundleBandwidth                Integer32
  -  mfrBundleFarEndName               SnmpAdminString
  -  mfrBundleResequencingErrors       Counter32

Bundle-to-ifIndex Mapping Table

This table provides a means to take an ifIndex and find the corresponding mfrBundleIndex. It is indexed by ifIndex and contains these columns: 

  -  mfrBundleIfIndexMapping           Integer32

mfrBundleLinkTable

This table provides a means to configure and monitor bundle links. It is indexed by ifIndex and contains these columns: 

  -  mfrBundleLinkRowStatus             RowStatus
  -  mfrBundleLinkConfigBundleIndex     Integer32
  -  mfrBundleLinkNearEndName           SnmpAdminString
  -  mfrBundleLinkState                 MfrBundleLinkState
  -  mfrBundleLinkFarEndName            SnmpAdminString
  -  mfrBundleLinkFarEndBundleName      SnmpAdminString
  -  mfrBundleLinkDelay                 Integer32
  -  mfrBundleLinkFramesControlTx       Counter32
  -  mfrBundleLinkFramesControlRx       Counter32
  -  mfrBundleLinkFramesControlInvalid  Counter32
  -  mfrBundleLinkTimerExpiredCount     Counter32
  -  mfrBundleLinkLoopbackSuspected     Counter32
  -  mfrBundleLinkUnexpectedSequence    Counter32
  -  mfrBundleLinkMismatch              Counter32

Relationship With Other MIBS and Tables

Relationship With Interface Table

Bundle Links

Each bundle link will appear as an interface in the ifTable. The ifIndex that appears in the ifTable is used for indexing the bundle link tables in the UNI-NNI MFR MIB.

Bundles

Each bundle will appear as an interface in the ifTable. There will be corresponding mfrBundleIndex which may be different than the ifIndex of the bundle.

The reason is best summarized in RFC 2494 [RFC2494], which describes frame relay bundle of DS0. It says: 

  This table is not indexed by ifIndex because the manager has to
  choose the index in a createable row and the agent must be allowed
  to select ifIndex values.

The rows in the ifEntry table are not createable as they do not have row status. RFC 2863 [RFC2863] suggests that the ifIndex should be chosen by the agent. Here is its statement regarding row creation and deletion: 

  While some interfaces, for example, most physical interfaces,
  cannot be created via network management, other interfaces such as
  logical interfaces sometimes can be.  The ifTable contains only
  generic information about an interface.  Almost all 'create-able'
  interfaces have other, media-specific, information through which

  configuration parameters may be supplied prior to creating such an
  interface.  Thus, the ifTable does not itself support the creation
  or deletion of an interface (specifically, it has no RowStatus
  column).  Rather, if a particular interface type supports the
  dynamic creation and/or deletion of an interface of that type,
  then that media-specific MIB should include an appropriate
  RowStatus object (see the ATM LAN-Emulation Client MIB [ATMLANE]
  for an example of a MIB which does this).  Typically, when such a
  RowStatus object is created/deleted, then the conceptual row in
  the ifTable appears/disappears as a by-product, and an ifIndex
  value (chosen by the agent) is stored in an appropriate object in
  the media-specific MIB.

The ATM LAN-Emulation Client MIB [ATMLANE] uses different indices and so does the IMA MIB [ATMIMA]. Looking at the examples we have, and the statements from RFC, it seems better to have two indices. This gives the SNMP agent implementor the freedom to manage their ifIndex in the way they like.

Mapping Between ifIndex and mfrBundleIndex

The mfrBundleIfIndexMappingTable is indexed by ifIndex and provides the means to map a given ifIndex into the corresponding mfrBundleIndex. The mfrBundleIfIndexMapping object in the mfrBundleTable (indexed by mfrBundleIndex) provides the reverse mapping of a mfrBundleIndex to the corresponding ifIndex in the ifTable.

ifTable Objects

The bundle configuration and status table. There is a one-to-one correspondence between a bundle and an interface represented in the ifTable.

The following objects of the ifTable have specific meaning for an MFR bundle: 

  ifAdminStatus  -  the bundle admin status
  ifOperStatus   -  the bundle operational status
  ifSpeed        -  the current bandwidth of the bundle
  ifInUcastPkts  -  the number of frames received on the bundle
  ifOutUcastPkts -  the number of frames transmitted on the bundle
  ifInErrors     -  frame (not fragment) errors
  ifOutErrors    -  frame (not fragment) errors

The following objects of the ifTable have specific meaning for an MFR bundle link: 

  ifAdminStatus  -  the bundle link admin status
  ifOperStatus   -  the bundle link operational status
  ifSpeed        -  the bandwidth of the bundle link interface
  ifInUcastPkts  -  the number of frames received on the bundle link
  ifOutUcastPkts -  the number of frames transmitted on the bundle
                    link
  ifInErrors     -  frame and fragment errors
  ifOutErrors    -  frame and fragment errors

Relationship With Interface Stack Table

The bundles and bundle links will appear in the ifStackTable defined in RFC 2863 [RFC2863]. Each bundle link will appear a lower layer to its owner bundle. The bundle will appear as a higher layer to the bundle links and as a lower layer to a frame relay service or UNI.

Relationship With Frame Relay DTE MIB

The bundle will have a one-to-one correspondence with a DLCMI or UNI that appear in the DTE MIB tables [RFC2115].

Relationship With Frame Relay Service MIB

There is a one-to-one relationship between the MFR bundle and the frame relay service logical port defined in RFC1604 [RFC1604].

Example

Figure two shows an example of how the various tables are related. This example shows two bundles composed of 2 T1s each. The bundles have a mfrBundleIndex of 10 and 20 respectively. 

                 +-------------------------+
                 |   Frame Relay Service   |
                 +-----+-------------+-----+
                       |             |
                 +-----+------+------+-----+
                 | MFR Bundle | MFR Bundle |
                 |    10      |     20     |
                 +--+-----+---+---+-----+--+
                    |     |       |     |
                  +-+-+ +-+-+   +-+-+ +-+-+
                  |T1 | |T1 |   |T1 | |T1 |
                  +---+ +---+   +-+-+ +---+

      Figure 2: Frame Relay Service Being Carried on 4 T1s

The assignment of the ifTable index values could for example be: 

  ifIndex |  Description               | ifType
  --------+----------------------------+----------------------
     1    |  FrameRelayService         | frameRelayService(44)
     2    |  MFR Bundle #10            | frf16MfrBundle(163)
     3    |  MFR Bundle #20            | frf16MfrBundle(163)
     4    |  ds1 #1/MFR Bundle Link #1 | ds1(18)
     5    |  ds1 #2/MFR Bundle Link #2 | ds1(18)
     6    |  ds1 #3/MFR Bundle Link #3 | ds1(18)
     7    |  ds1 #4/MFR Bundle Link #4 | ds1(18)

The ifStackTable is then used to show the relationships between the various interfaces. 

  HigherLayer | LowerLayer
  ------------+-----------
      0       |     1
      1       |     2
      1       |     3
      2       |     4
      2       |     5
      3       |     6
      3       |     7
      4       |     0
      5       |     0
      6       |     0
      7       |     0

The mfrBundleIfIndexMappingTable shows the relationship between the ifTable ifIndex and the mfrBundleIndex: 

  ifIndex | mfrBundleIfIndexMappingIndex
  --------+-----------------------------
     2    |            10
     3    |            20

The mfrBundleTable shows the relationship between the mfrBundleIndex and the ifIndex: 

  mfrBundleIndex | mfrBundleIfIndex
  ---------------+-----------------
          10     |      2
          20     |      3

The mfrBundleLinkTable shows the relationship between the bundles and bundle links: 

  mfrBundleIndex | mfrBundleLinkIfIndex
  ---------------+---------------------
         10      |        4
         10      |        5
         20      |        6
         20      |        7

Creation Of Bundles and Bundle Links

Creation Of Bundles

A new bundle is created by setting a createAndGo(4) value in the mfrBundleRowStatus RowStatus object. Optionally, an agent could also support setting a value of createAndWait(5) followed by a set to the value active(1).

When a bundle is created, the agent must create a new interface in the ifTable. The ifIndex for this new interface is used for the value of mfrBundleIfIndex.

Creation Of Bundle Links

A new bundle link is created by setting a createAndGo(4) value in the mfrBundleLinkRowStatus RowStatus object.

The bundle link is associated with a specific physical interface and uses the ifIndex of the physical interface. The mfrBundleLinkEntry row objects may be created after or during creation of the physical interface's ifEntry row objects.

The bundle identified in the object mfrBundleIndex must exist at time of bundle link creation.

Notifications

The linkUp and linkDown traps are defined in RFC 2223 [RFC2223].

Bundle

The following SNMP traps are defined for MFR bundles.

linkUp

This trap is sent when the ifOperStatus of a bundle transitions from down to up. This occurs when a sufficient number of links (determined by mfrBundleActivationClass and mfrBundleThreshold) are in the operationally up state.

linkDown

This trap is sent when the ifOperStatus of a bundle transitions from up to down. This occurs when a insufficient number of links (determined by mfrBundleActivationClass and mfrBundleThreshold) are in the operationally up state.

Bundle Link

The following SNMP traps are defined for MFR bundle links.

linkUp

This trap is sent when a mfrBundleLinkState object transitions to the value mfrBundleLinkStateUp.

linkDown

This trap is sent when a mfrBundleLinkState object transitions from the value mfrBundleLinkStateUp.

mfrMibTrapBundleLinkMismatch

This trap indicates that a bundle link mismatch has been detected. The following objects are reported:

- mfrBundleNearEndName: configured name of near end bundle - mfrBundleFarEndName: previously reported name of far 

                                 end bundle

- mfrBundleLinkNearEndName: configured name of near end bundle - mfrBundleLinkFarEndName: reported name of far end bundle - mfrBundleLinkFarEndBundleName: currently reported name of far 

                                 end bundle

Note that the configured items may have been configured automatically. Note also that the mfrBundleLinkMismatch counter is incremented when the trap is sent.

Object Definitions

Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to refer to the object type.

FR-MFR-MIB DEFINITIONS ::= BEGIN

IMPORTS 

  MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
     NOTIFICATION-TYPE, transmission
     FROM SNMPv2-SMI
  TEXTUAL-CONVENTION, TestAndIncr, RowStatus
     FROM SNMPv2-TC
  MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
     FROM SNMPv2-CONF
  SnmpAdminString
     FROM SNMP-FRAMEWORK-MIB
  InterfaceIndex, ifIndex
     FROM IF-MIB;

mfrMib MODULE-IDENTITY 

  LAST-UPDATED "200011300000Z"
  ORGANIZATION "IETF Frame Relay Service MIB (frnetmib)
                Working Group"
  CONTACT-INFO
    "WG Charter:
         http://www.ietf.org/html.charters/frnetmib-charter.html
     WG-email:      [email protected]
     Subscribe:     [email protected]
     Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib

     Chair:      Andy Malis
                 Vivace Networks
     Email:      [email protected]

     WG editor:  Prayson Pate
                 Overture Networks
     Email:      [email protected]

     Co-author:  Bob Lynch
                 Overture Networks

     EMail:      [email protected]

     Co-author:  Kenneth Rehbehn
                 Megisto Systems, Inc.
     EMail:      [email protected]"

  DESCRIPTION
     "This is the MIB used to control and monitor the multilink
      frame relay (MFR) function described in FRF.16."

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Revision History -- --------------------------------------------------------- -- --------------------------------------------------------- 

  REVISION "200011300000Z"
  DESCRIPTION
      "Published as RFC 3020."

  ::= { transmission 47 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Textual Conventions -- --------------------------------------------------------- -- ---------------------------------------------------------

MfrBundleLinkState ::= TEXTUAL-CONVENTION 

  STATUS      current
  DESCRIPTION
     "The possible states for a bundle link, as defined in
      Annex A of FRF.16."
  REFERENCE "FRF.16 Annex A"
  SYNTAX  INTEGER {
     mfrBundleLinkStateAddSent       (1),
     mfrBundleLinkStateAddRx         (2),
     mfrBundleLinkStateAddAckRx      (3),
     mfrBundleLinkStateUp            (4),
     mfrBundleLinkStateIdlePending   (5),
     mfrBundleLinkStateIdle          (6),
     mfrBundleLinkStateDown          (7),
     mfrBundleLinkStateDownIdle      (8)
     }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Object Identifiers

-- --------------------------------------------------------- -- ---------------------------------------------------------

mfrMibScalarObjects OBJECT IDENTIFIER ::= { mfrMib 1 } mfrMibBundleObjects OBJECT IDENTIFIER ::= { mfrMib 2 } mfrMibBundleLinkObjects OBJECT IDENTIFIER ::= { mfrMib 3 } mfrMibTraps OBJECT IDENTIFIER ::= { mfrMib 4 } mfrMibConformance OBJECT IDENTIFIER ::= { mfrMib 5 }

mfrMibTrapsPrefix OBJECT IDENTIFIER ::= { mfrMibTraps 0 }

mfrMibGroups OBJECT IDENTIFIER ::= { mfrMibConformance 1 } mfrMibCompliances OBJECT IDENTIFIER ::= { mfrMibConformance 2 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Scalars -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrBundleMaxNumBundles OBJECT-TYPE 

  SYNTAX  Integer32
  MAX-ACCESS read-only
  STATUS  current
  DESCRIPTION
     "This object is used to inform the manager of the
      maximum number of bundles supported by this device."
  ::= { mfrMibScalarObjects 1 }

mfrBundleNextIndex OBJECT-TYPE 

  SYNTAX  TestAndIncr
  MAX-ACCESS read-write
  STATUS  current
  DESCRIPTION
     "This object is used to assist the manager in
      selecting a value for mfrBundleIndex during row creation
      in the mfrBundleTable.  It can also be used to avoid race
      conditions with multiple managers trying to create
      rows in the table (see RFC 2494 [RFC2494] for one such
      alogrithm)."
  REFERENCE "RFC 2494"
  ::= { mfrMibScalarObjects 2 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Bundle Table -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrBundleTable OBJECT-TYPE 

  SYNTAX  SEQUENCE OF MfrBundleEntry
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
     "The bundle configuration and status table.  There
      is a one-to-one correspondence between a bundle
      and an interface represented in the ifTable.

      The following objects of the ifTable have specific
      meaning for an MFR bundle:
         ifAdminStatus  - the bundle admin status
         ifOperStatus   - the bundle operational status
         ifSpeed        - the current bandwidth of the bundle
         ifInUcastPkts  - the number of frames received
                          on the bundle
         ifOutUcastPkts - the number of frames transmitted
                          on the bundle
         ifInErrors     - frame (not fragment) errors
         ifOutErrors    - frame (not fragment) errors
         "
  ::= { mfrMibBundleObjects 3 }

mfrBundleEntry OBJECT-TYPE 

  SYNTAX  MfrBundleEntry
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
     "An entry in the bundle table."
  INDEX   { mfrBundleIndex }
  ::= { mfrBundleTable 1 }

MfrBundleEntry ::= 

  SEQUENCE {
     mfrBundleIndex
        Integer32,
     mfrBundleIfIndex
        InterfaceIndex,
     mfrBundleRowStatus
        RowStatus,
     mfrBundleNearEndName
        SnmpAdminString,
     mfrBundleFragmentation
        INTEGER,
     mfrBundleMaxFragSize
        Integer32,
     mfrBundleTimerHello
        INTEGER,

     mfrBundleTimerAck
        INTEGER,
     mfrBundleCountMaxRetry
        INTEGER,
     mfrBundleActivationClass
        INTEGER,
     mfrBundleThreshold
        Integer32,
     mfrBundleMaxDiffDelay
        Integer32,
     mfrBundleSeqNumSize
        INTEGER,
     mfrBundleMaxBundleLinks
        Integer32,
     mfrBundleLinksConfigured
        Integer32,
     mfrBundleLinksActive
        Integer32,
     mfrBundleBandwidth
        Integer32,
     mfrBundleFarEndName
        SnmpAdminString,
     mfrBundleResequencingErrors
        Counter32
     }

mfrBundleIndex OBJECT-TYPE 

  SYNTAX  Integer32 (1..2147483647)
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
     "The index into the table.  While this corresponds
      to an entry in the ifTable, the value of mfrBundleIndex
      need not match that of the ifIndex in the ifTable.
      A manager can use mfrBundleNextIndex to select a unique
      mfrBundleIndex for creating a new row."
  ::= { mfrBundleEntry 1 }

mfrBundleIfIndex OBJECT-TYPE 

  SYNTAX  InterfaceIndex
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The value must match an entry in the interface
      table whose ifType must be set to frf16MfrBundle(163).

      For example: if the value of mfrBundleIfIndex is 10,
      then a corresponding entry should be present in

      the ifTable with an index of 10 and an ifType of 163."
  ::= { mfrBundleEntry 2 }

mfrBundleRowStatus OBJECT-TYPE 

  SYNTAX  RowStatus
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
      "The mfrBundleRowStatus object allows create, change,
       and delete operations on bundle entries."
  REFERENCE "RFC 1903"
  ::= { mfrBundleEntry 3 }

mfrBundleNearEndName OBJECT-TYPE 

  SYNTAX  SnmpAdminString
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The configured name of the bundle."
  REFERENCE "FRF.16 section 3.4.1"
  ::= { mfrBundleEntry 4 }

mfrBundleFragmentation OBJECT-TYPE 

  SYNTAX  INTEGER {
     enable  (1),
     disable (2)
     }
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "Controls whether the bundle performs/accepts
      fragmentation and re-assembly.  The possible
      values are:

      enable(1) - Bundle links will fragment frames

      disable(2) - Bundle links will not fragment
                  frames."
  DEFVAL { disable }
  ::= { mfrBundleEntry 5 }

mfrBundleMaxFragSize OBJECT-TYPE 

  SYNTAX  Integer32 (-1..8184)
  UNITS "Octets"
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The maximum fragment size supported.  Note that this

      is only valid if mfrBundleFragmentation is set to enable(1).

      Zero is not a valid fragment size.

      A bundle that does not support fragmentation must return
      this object with a value of -1."
  DEFVAL { -1 }
  ::= { mfrBundleEntry 6 }

mfrBundleTimerHello OBJECT-TYPE 

  SYNTAX  INTEGER (1..180)
  UNITS "Seconds"
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The configured MFR Hello Timer value."
  REFERENCE "FRF.16 section 4.3.8.1"
  DEFVAL { 10 }
  ::= { mfrBundleEntry 7 }

mfrBundleTimerAck OBJECT-TYPE 

  SYNTAX  INTEGER (1..10)
  UNITS "Seconds"
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The configured MFR T_ACK value."
  REFERENCE "FRF.16 section 4.3.8.2"
  DEFVAL { 4 }
  ::= { mfrBundleEntry 8 }

mfrBundleCountMaxRetry OBJECT-TYPE 

  SYNTAX  INTEGER (1..5)
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The MFR N_MAX_RETRY value."
  REFERENCE "FRF.16 section 4.3.8.3"
  DEFVAL { 2 }
  ::= { mfrBundleEntry 9 }

mfrBundleActivationClass OBJECT-TYPE 

  SYNTAX  INTEGER {
     mfrBundleActivationClassA (1),
     mfrBundleActivationClassB (2),
     mfrBundleActivationClassC (3),
     mfrBundleActivationClassD (4)
     }

  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "Controls the conditions under which the bundle is activated.
      The following settings are available:

         mfrBundleActivationClassA(1) - at least one must link up
         mfrBundleActivationClassB(2) - all links must be up
         mfrBundleActivationClassC(3) - a certain number must be
                                        up.  Refer to
                                        mfrBundleThreshold for
                                        the required number.
         mfrBundleActivationClassD(4) - custom (implementation
                                        specific)."
  REFERENCE "FRF.16 section 4.2.2.1"
  DEFVAL { mfrBundleActivationClassA }
  ::= { mfrBundleEntry 10 }

mfrBundleThreshold OBJECT-TYPE 

  SYNTAX  Integer32 (-1..2147483647)
  UNITS "Bundle Links"
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "Specifies the number of links that must be in operational
      'up' state before the bundle will transition to an
      operational up/active state.  If the number of
      operational 'up' links falls below this value,
      then the bundle will transition to an inactive
      state.

      Note - this is only valid when mfrBundleActivationClass
      is set to mfrBundleActivationClassC or, depending upon the
      implementation, to mfrBundleActivationClassD.  A bundle that
      is not set to one of these must return this object with a
      value of -1."
  REFERENCE "FRF.16 section 4.2.2.1"
  DEFVAL { -1 }
  ::= { mfrBundleEntry 11 }

mfrBundleMaxDiffDelay OBJECT-TYPE 

  SYNTAX  Integer32 (-1..2147483647)
  UNITS "Milliseconds"
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The maximum delay difference between the bundle
      links.

      A value of -1 indicates that this object does not contain
      a valid value"
  DEFVAL { -1 }
  ::= { mfrBundleEntry 12 }

mfrBundleSeqNumSize OBJECT-TYPE 

  SYNTAX  INTEGER {
      seqNumSize12bit (1),
      seqNumSize24bit (2)
      }
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "Controls whether the standard FRF.12 12-bit
      sequence number is used or the optional 24-bit
      sequence number."
  REFERENCE "FRFTC/99-194"
  DEFVAL { seqNumSize12bit }
  ::= { mfrBundleEntry 13 }

mfrBundleMaxBundleLinks OBJECT-TYPE 

  SYNTAX  Integer32 (1..2147483647)
  UNITS "Bundle Links"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The maximum number of bundle links supported for
      this bundle."
  ::= { mfrBundleEntry 14 }

mfrBundleLinksConfigured OBJECT-TYPE 

  SYNTAX  Integer32 (1..2147483647)
  UNITS "Bundle Links"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The number of links configured for the bundle."
  ::= {  mfrBundleEntry 15 }

mfrBundleLinksActive OBJECT-TYPE 

  SYNTAX  Integer32 (-1..2147483647)
  UNITS "Bundle Links"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The number of links that are active."
  ::= {  mfrBundleEntry 16 }

mfrBundleBandwidth OBJECT-TYPE 

   SYNTAX  Integer32
   UNITS "Bits/Sec"
   MAX-ACCESS  read-only
   STATUS  current
   DESCRIPTION
      "The amount of available bandwidth on the bundle"
   ::= {  mfrBundleEntry 17 }

mfrBundleFarEndName OBJECT-TYPE 

  SYNTAX  SnmpAdminString
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Name of the bundle received from the far end."
  REFERENCE "FRF.16 section 3.4.1"
  ::= { mfrBundleEntry 18 }

mfrBundleResequencingErrors OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Error Events"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "A count of the number of resequencing errors.  Each event
      may correspond to multiple lost frames.  Example:
      Say sequence number 56, 59 and 60 is received for DLCI 100.
      It is decided by some means that sequence 57 and 58 is lost.
      This counter should then be incremented by ONE, even though
      two frames were lost."
  ::= { mfrBundleEntry 19 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- ifIndex Mapping to Bundle Index Table -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrBundleIfIndexMappingTable OBJECT-TYPE 

  SYNTAX  SEQUENCE OF MfrBundleIfIndexMappingEntry
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
      "A table mapping the values of ifIndex to the
       mfrBundleIndex.  This is required in order to find
       the mfrBundleIndex given an ifIndex.  The mapping of
       mfrBundleIndex to ifIndex is provided by the
       mfrBundleIfIndex entry in the mfrBundleTable."

  ::= { mfrMibBundleObjects 4 }

mfrBundleIfIndexMappingEntry OBJECT-TYPE 

  SYNTAX  MfrBundleIfIndexMappingEntry
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
       "Each row describes one ifIndex to mfrBundleIndex mapping."
INDEX   { ifIndex }
::= { mfrBundleIfIndexMappingTable 1 }

MfrBundleIfIndexMappingEntry ::= 

  SEQUENCE {
    mfrBundleIfIndexMappingIndex
       Integer32
    }

mfrBundleIfIndexMappingIndex OBJECT-TYPE 

  SYNTAX  Integer32 (1..2147483647)
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
       "The mfrBundleIndex of the given ifIndex."
::= { mfrBundleIfIndexMappingEntry 2 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Bundle Link Table -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrBundleLinkTable OBJECT-TYPE 

  SYNTAX  SEQUENCE OF MfrBundleLinkEntry
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
     "The bundle link configuration and status table.  There
      is a one-to-one correspondence between a bundle link
      and a physical interface represented in the ifTable.  The
      ifIndex of the physical interface is used to index the
      bundle link table, and to create rows.

      The following objects of the ifTable have specific
      meaning for an MFR bundle link:

         ifAdminStatus  - the bundle link admin status
         ifOperStatus   - the bundle link operational
                          status

         ifSpeed        - the bandwidth of the bundle
                          link interface
         ifInUcastPkts  - the number of frames received
                          on the bundle link
         ifOutUcastPkts - the number of frames transmitted
                          on the bundle link
         ifInErrors     - frame and fragment errors
         ifOutErrors    - frame and fragment errors"
  ::= { mfrMibBundleLinkObjects 1 }

mfrBundleLinkEntry OBJECT-TYPE 

  SYNTAX  MfrBundleLinkEntry
  MAX-ACCESS  not-accessible
  STATUS  current
  DESCRIPTION
     "An entry in the bundle link table."
  INDEX   { ifIndex }
  ::= { mfrBundleLinkTable 1 }

MfrBundleLinkEntry ::= 

  SEQUENCE {
     mfrBundleLinkRowStatus
        RowStatus,
     mfrBundleLinkConfigBundleIndex
        Integer32,
     mfrBundleLinkNearEndName
        SnmpAdminString,
     mfrBundleLinkState
        MfrBundleLinkState,
     mfrBundleLinkFarEndName
        SnmpAdminString,
     mfrBundleLinkFarEndBundleName
        SnmpAdminString,
     mfrBundleLinkDelay
        Integer32,
     mfrBundleLinkFramesControlTx
        Counter32,
     mfrBundleLinkFramesControlRx
        Counter32,
     mfrBundleLinkFramesControlInvalid
        Counter32,
     mfrBundleLinkTimerExpiredCount
        Counter32,
     mfrBundleLinkLoopbackSuspected
        Counter32,
     mfrBundleLinkUnexpectedSequence
        Counter32,
     mfrBundleLinkMismatch

        Counter32
     }

mfrBundleLinkRowStatus OBJECT-TYPE 

  SYNTAX  RowStatus
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The mfrBundleLinkRowStatus object allows create, change,
      and delete operations on mfrBundleLink entries.

      The create operation must fail if no physical interface
      is associated with the bundle link."
  ::= { mfrBundleLinkEntry 1 }

mfrBundleLinkConfigBundleIndex OBJECT-TYPE 

  SYNTAX  Integer32 (1..2147483647)
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The mfrBundleLinkConfigBundleIndex object allows
      the manager to control the bundle to which the bundle
      link is assigned.  If no value were in this field, then
      the bundle would remain in NOT_READY rowStatus and be
      unable to go to active.  With an appropriate mfrBundleIndex
      in this field, then we could put the mfrBundleLink row in
      NOT_IN_SERVICE or ACTIVE rowStatus."
  ::= { mfrBundleLinkEntry 2 }

mfrBundleLinkNearEndName OBJECT-TYPE 

  SYNTAX  SnmpAdminString
  MAX-ACCESS  read-create
  STATUS  current
  DESCRIPTION
     "The configured bundle link name that is sent to the far end."
  ::= { mfrBundleLinkEntry 3 }

mfrBundleLinkState OBJECT-TYPE 

  SYNTAX  MfrBundleLinkState
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Current bundle link state as defined by the MFR protocol
      described in Annex A of FRF.16."
  REFERENCE "FRF.16 Annex A"
  ::= { mfrBundleLinkEntry 4 }

mfrBundleLinkFarEndName OBJECT-TYPE 

  SYNTAX  SnmpAdminString
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Name of bundle link received from far end."
  REFERENCE "FRF.16 section 3.4.2"
  ::= { mfrBundleLinkEntry 5 }

mfrBundleLinkFarEndBundleName OBJECT-TYPE 

  SYNTAX  SnmpAdminString
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Name of far end bundle for this link received from far end."
  REFERENCE "FRF.16 section 3.4.1"
  ::= { mfrBundleLinkEntry 6 }

mfrBundleLinkDelay OBJECT-TYPE 

  SYNTAX  Integer32 (-1..2147483647)
  UNITS "Milliseconds"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Current round-trip delay for this bundle link.  The
      value -1 is returned when an implementation does not
      support measurement of the bundle link delay."
  REFERENCE "FRF.16 section 3.4.4"
  ::= { mfrBundleLinkEntry 7 }

mfrBundleLinkFramesControlTx OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Frames"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Number of MFR control frames sent."
  REFERENCE "FRF.16 section 3.2"
  ::= { mfrBundleLinkEntry 8 }

mfrBundleLinkFramesControlRx OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Frames"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Number of valid MFR control frames received."
  REFERENCE "FRF.16 section 3.2"
  ::= { mfrBundleLinkEntry 9 }

mfrBundleLinkFramesControlInvalid OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Frames"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The number of invalid MFR control frames received."
  REFERENCE "FRF.16 section 3.2"
  ::= { mfrBundleLinkEntry 10 }

mfrBundleLinkTimerExpiredCount OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Timer Expiration Events"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "Number of times the T_HELLO or T_ACK timers expired."
  REFERENCE "FRF.16 section 4.3.8.1 and 4.3.8.2"
  ::= { mfrBundleLinkEntry 11 }

mfrBundleLinkLoopbackSuspected OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Loopback Suspected Events"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The number of times a loopback has been suspected
      (based upon the use of magic numbers)."
  REFERENCE "FRF.16 section 4.3.7"
  ::= { mfrBundleLinkEntry 12 }

mfrBundleLinkUnexpectedSequence OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Frames"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The number of data MFR frames discarded because the sequence
      number of the frame for a DLCI was less than (delayed frame)
      or equal to (duplicate frame) the one expected for that DLCI.

      Example:
      Say frames with sequence numbers 56, 58, 59 is received for
      DLCI 100.  While waiting for sequence number 57 another frame
      with sequence number 58 arrives.  Frame 58 is discarded and
      the counter is incremented."
  REFERENCE "FRF.16 section 4.2.3.2"
  ::= { mfrBundleLinkEntry 13 }

mfrBundleLinkMismatch OBJECT-TYPE 

  SYNTAX  Counter32
  UNITS "Bundle Name Mismatch Events"
  MAX-ACCESS  read-only
  STATUS  current
  DESCRIPTION
     "The number of times that the unit has been notified by the
      remote peer that the bundle name is inconsistent with other
      bundle links attached to the far-end bundle."
  REFERENCE "FRF.16 section 4.3.2.4"
  ::= { mfrBundleLinkEntry 14 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Notifications/Traps -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE 

  OBJECTS {
     mfrBundleNearEndName,
     mfrBundleFarEndName,
     mfrBundleLinkNearEndName,
     mfrBundleLinkFarEndName,
     mfrBundleLinkFarEndBundleName
     }
  STATUS  current
  DESCRIPTION
     "This trap indicates that a bundle link mismatch has
      been detected.  The following objects are reported:

      mfrBundleNearEndName:    configured name of near end bundle

      mfrBundleFarEndName:     previously reported name of
                            far end bundle

      mfrBundleLinkNearEndName: configured name of near end bundle

      mfrBundleLinkFarEndName: reported name of far end bundle

      mfrBundleLinkFarEndBundleName: currently reported name of
                            far end bundle

      Note: that the configured items may have been configured
            automatically.

      Note: The mfrBundleLinkMismatch counter is incremented when
            the trap is sent."

  REFERENCE "FRF.16 section 4.3.2.4"
   ::= { mfrMibTrapsPrefix 1 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Conformance/Compliance -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrMibCompliance MODULE-COMPLIANCE 

  STATUS      current
  DESCRIPTION
     "The compliance statement for equipment that implements
      the FRF16 MIB.  All of the current groups are mandatory,
      but a number of objects may be read-only if the
      implementation does not allow configuration."
  MODULE -- this module
  MANDATORY-GROUPS {
     mfrMibBundleGroup,
     mfrMibBundleLinkGroup,
     mfrMibTrapGroup
     }

  OBJECT     mfrBundleFragmentation
  MIN-ACCESS read-only
  DESCRIPTION
      "Write access is not required, but the value used must be
       reported."

  OBJECT     mfrBundleMaxFragSize
  MIN-ACCESS read-only
  DESCRIPTION
      "Write access is not required, but the value used must be
       reported.
       A value of -1 indicates that the value is not applicable."

  OBJECT     mfrBundleThreshold
  MIN-ACCESS read-only
  DESCRIPTION
      "Write access is not required, but the value used must be
       reported.
       A value of -1 indicates that the value is not applicable."

  OBJECT     mfrBundleMaxDiffDelay
  MIN-ACCESS read-only
  DESCRIPTION
      "Write access is not required, but the value used must be
       reported."

  OBJECT     mfrBundleSeqNumSize
  MIN-ACCESS read-only
  DESCRIPTION
      "Write access is not required, but the value used must be
       reported.
       A value of -1 indicates that the value is not applicable."

  ::= { mfrMibCompliances 1 }

-- --------------------------------------------------------- -- --------------------------------------------------------- -- Units of Conformance -- --------------------------------------------------------- -- ---------------------------------------------------------

mfrMibBundleGroup OBJECT-GROUP 

  OBJECTS {
     mfrBundleMaxNumBundles,
     mfrBundleNextIndex,
     mfrBundleIfIndex,
     mfrBundleRowStatus,
     mfrBundleNearEndName,
     mfrBundleFragmentation,
     mfrBundleMaxFragSize,
     mfrBundleTimerHello,
     mfrBundleTimerAck,
     mfrBundleCountMaxRetry,
     mfrBundleActivationClass,
     mfrBundleThreshold,
     mfrBundleMaxDiffDelay,
     mfrBundleMaxBundleLinks,
     mfrBundleLinksConfigured,
     mfrBundleLinksActive,
     mfrBundleBandwidth,
     mfrBundleSeqNumSize,
     mfrBundleFarEndName,
     mfrBundleResequencingErrors,
     mfrBundleIfIndexMappingIndex
     }
  STATUS current
  DESCRIPTION
      "Group of objects describing bundles."
  ::= { mfrMibGroups 1 }

mfrMibBundleLinkGroup OBJECT-GROUP 

  OBJECTS {
     mfrBundleLinkRowStatus,

     mfrBundleLinkConfigBundleIndex,
     mfrBundleLinkNearEndName,
     mfrBundleLinkState,
     mfrBundleLinkFarEndName,
     mfrBundleLinkFarEndBundleName,
     mfrBundleLinkDelay,
     mfrBundleLinkFramesControlTx,
     mfrBundleLinkFramesControlRx,
     mfrBundleLinkFramesControlInvalid,
     mfrBundleLinkTimerExpiredCount,
     mfrBundleLinkLoopbackSuspected,
     mfrBundleLinkUnexpectedSequence,
     mfrBundleLinkMismatch
     }
  STATUS current
  DESCRIPTION
      "Group of objects describing bundle links."
  ::= { mfrMibGroups 2 }

mfrMibTrapGroup NOTIFICATION-GROUP 

  NOTIFICATIONS {
     mfrMibTrapBundleLinkMismatch
     }
  STATUS current
  DESCRIPTION
      "Group of objects describing notifications (traps)."
  ::= { mfrMibGroups 3 }

END

Acknowledgments

This document was produced by the Frame Relay Service MIB (frnetmib) Working Group in conjunction with the Frame Relay Forum.

References

[RFC2571] Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture 

         for Describing SNMP Management Frameworks", RFC 2571, April
         1999.

[RFC1155] Rose, M. and K. McCloghrie, "Structure and Identification 

         of Management Information for TCP/IP-based Internets", STD
         16, RFC 1155, May 1990.

[RFC1212] Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 

         16, RFC 1212, March 1991.

[RFC1215] Rose, M., "A Convention for Defining Traps for use with the 

         SNMP", RFC 1215, March 1991.

[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., 

         Rose, M. and S. Waldbusser, "Structure of Management
         Information Version 2 (SMIv2)", STD 58, RFC 2578, April
         1999.

[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., 

         Rose, M. and S. Waldbusser, "Textual Conventions for
         SMIv2", STD 58, RFC 2579, April 1999.

[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., 

         Rose, M. and S. Waldbusser, "Conformance Statements for
         SMIv2", STD 58, RFC 2580, April 1999.

[RFC1157] Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple 

         Network Management Protocol", STD 15, RFC 1157, May 1990.

[RFC1901] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, 

         "Introduction to Community-based SNMPv2", RFC 1901, January
         1996.

[RFC1906] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, 

         "Transport Mappings for Version 2 of the Simple Network
         Management Protocol (SNMPv2)", RFC 1906, January 1996.

[RFC2572] Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message 

         Processing and Dispatching for the Simple Network
         Management Protocol (SNMP)", RFC 2572, April 1999.

[RFC2574] Blumenthal, U. and B. Wijnen, "User-based Security Model 

         (USM) for version 3 of the Simple Network Management
         Protocol (SNMPv3)", RFC 2574, April 1999.

[RFC1905] Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, 

         "Protocol Operations for Version 2 of the Simple Network
         Management Protocol (SNMPv2)", RFC 1905, January 1996.

[RFC2573] Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications", 

         RFC 2573, April 1999.

[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based 

         Access Control Model (VACM) for the Simple Network
         Management Protocol (SNMP)", RFC 2575, April 1999.

[RFC2570] Case, J., Mundy, R., Partain, D. and B. Stewart, 

         "Introduction to Version 3 of the Internet-standard Network
         Management Framework", RFC 2570, April 1999.

[Q.922] ITU-T, Recommendation Q.922: "ISDN Data Link Layer 

         Specification For Frame Mode Bearer Services"

[Q.933] ITU-T, Recommendation Q.933: "Signalling Specification For 

         Frame Mode Basic Call Control"

[FRF.4] R. Cherukuri (ed), FRF.4: "Frame Relay User-to-Network SVC 

         Implementation Agreement" January 5, 1994.

[FRF.16] M. Sheehan (ed), FRF.16: "UNI/NNI Multilink Frame Relay 

         Interworking Implementation Agreement" August 20, 1999.

[RFC1604] Rehbehn, K. and D. Fowler, "Definitions of Managed Objects 

         for Frame Relay Service", RFC 2954, October 2000.

[RFC2494] Fowler, D., "Definitions of Managed Objects for the DS0 and 

         DS0 Bundle Interface Type", RFC 2494, November 1997.

[RFC2863] McCloghrie, D. and F. Kastenholz, "The Interfaces Group MIB 

         using SMIv2", RFC 2233, June 2000.

[ATMLANE] T. Newton, ed., "LAN Emulation Client Management 

         Specification Version 2.0" AF-LANE-0093.000, ATM Forum,
         October, 1998

[ATMIMA] R. Vallee, ed., "Inverse Multiplexing for ATM Specification 

         Version 1.1" (Appendix A) AF-PHY-0086.001, ATM Forum,
         March, 1999

[RFC2115] Brown, C. and F. Baker, "Management Information Base for 

         Frame Relay DTEs Using SMIv2", RFC 2115, September 1997.

Security Considerations

There are a number of management objects defined in this MIB that have a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations.

No managed objects in this MIB contain sensitive information.

SNMPv1 by itself is not a secure environment. Even if the network itself is secure (for example by using IPSec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB.

It is recommended that the implementers consider the security features as provided by the SNMPv3 framework. Specifically, the use of the User-based Security Model RFC 2574 [RFC2574] and the View- based Access Control Model RFC 2575 [RFC2575] is recommended.

It is then a customer/user responsibility to ensure that the SNMP entity giving access to an instance of this MIB, is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.

Authors' Addresses

Prayson Pate Overture Networks P. O. Box 14864 RTP, NC, USA 27709

Phone: +1 919 558 2200 EMail: [email protected]

Bob Lynch Overture Networks P. O. Box 14864 RTP, NC, USA 27709

Phone: +1 919 558-2200 EMail: [email protected]

Kenneth Rehbehn Megisto Systems, Inc. 20251 Century Boulevard Germantown, MD, USA 20874

Phone: +1 301 529-4427 EMail: [email protected]

Full Copyright Statement

Copyright (C) The Internet Society (2000). All Rights Reserved.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.

This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

Funding for the RFC Editor function is currently provided by the Internet Society.

Retrieved from "https://rfc-wiki.org/index.php?title=RFC3020&oldid=9387"