RFC1285
From RFC-Wiki
Network Working Group J. Case Request for Comments: 1285 SNMP Research, Incorporated
January 1992
FDDI Management Information Base
Status of this Memo
This memo is an extension to the SNMP MIB. This RFC specifies an IAB standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "IAB Official Protocol Standards" for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Contents
Abstract
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing devices which implement the FDDI.
The Network Management Framework
The Internet-standard Network Management Framework consists of three components. They are:
RFC 1155 which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management. RFC 1212 defines a more concise description mechanism, which is wholly consistent with the SMI.
RFC 1156 which defines MIB-I, the core set of managed objects for the Internet suite of protocols. RFC 1213, defines MIB-II, an evolution of MIB-I based on implementation experience and new operational requirements.
RFC 1157 which defines the SNMP, the protocol used for network access to managed objects.
The Framework permits new objects to be defined for the purpose of experimentation and evaluation.
Objects
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) [5] defined in the SMI. In particular, each object has a name, a syntax, and an encoding. The name is an object identifier, an administratively assigned name, which specifies an object type. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the OBJECT DESCRIPTOR, to also refer to the object type.
The syntax of an object type defines the abstract data structure corresponding to that object type. The ASN.1 language is used for this purpose. However, the SMI [1] purposely restricts the ASN.1 constructs which may be used. These restrictions are explicitly made for simplicity.
The encoding of an object type is simply how that object type is represented using the object type's syntax. Implicitly tied to the notion of an object type's syntax and encoding is how the object type is represented when being transmitted on the network.
The SMI specifies the use of the basic encoding rules of ASN.1 [6], subject to the additional requirements imposed by the SNMP.
Format of Definitions
Section 5 contains contains the specification of all object types contained in this MIB module. The object types are defined using the conventions defined in the SMI, as amended by the extensions
specified in [7].
Overview
This document defines the managed objects for FDDI devices which are to be accessible via the Simple Network Management Protocol (SNMP). At present, this applies to these values of the ifType variable in the Internet-standard MIB:
fddi(15)
For these interfaces, the value of the ifSpecific variable in the MIB-II [4] has the OBJECT IDENTIFIER value:
fddi OBJECT IDENTIFIER ::= { transmission 15 }
The definitions of the objects presented here draws heavily from related work in the ANSI X3T9.5 committee and the SMT subcommittee of that committee [8]. In fact, the definitions of the managed objects in this document are, to the maximum extent possible, identical to those identified by the ANSI committee. The semantics of each managed object should be the same with syntactic changes made as necessary to recast the objects in terms of the Internet-standard SMI and MIB so as to be compatible with the SNMP. Examples of these syntactic changes include remapping booleans to enumerated integers, remapping bit strings to octet strings, and the like. In addition, the naming of the objects was changed to achieve compatibility.
These minimal syntactic changes with no semantic changes should allow implementations of SNMP manageable FDDI systems to share instrumentation with other network management schemes and thereby minimize implementation cost. In addition, the translation of information conveyed by managed objects from one network management scheme to another is eased by these shared definitions.
Only the essential variables, as indicated by their mandatory status in the ANSI specification were retained in this document. The importance of variables which have an optional status in the ANSI specification were perceived as being less widely accepted.
Textual Conventions
Several new datatypes are introduced as a textual convention in this MIB document. These textual conventions enhance the readability of the document and ease comparisons with its ANSI counterpart. It should be noted that the introduction of the following textual conventions has no effect on either the syntax nor the semantics of any managed objects. The use of these is merely an artifact of the
explanatory method used. Objects defined in terms of one of these methods are always encoded by means of the rules that define the primitive type. Hence, no changes to the SMI or the SNMP are necessary to accommodate these textual conventions which are adopted merely for the convenience of readers and writers in pursuit of the elusive goal of clear, concise, and unambiguous MIB documents.
Object Definitions
RFC1285-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter
FROM RFC1155-SMI
transmission
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212;
-- This MIB module uses the extended OBJECT-TYPE macro as
-- defined in [7].
-- this is the FDDI MIB module
fddi OBJECT IDENTIFIER ::= { transmission 15 }
-- textual conventions
FddiTime ::= INTEGER (0..2147483647)
-- This data type specifies octet units of 80 nanoseconds as
-- an integer value. It is used for Path Latency and
-- Synchronous Bandwidth values. The encoding is normal
-- integer representation (not twos complement).
FddiResourceId ::= INTEGER (0..65535)
-- This data type is used to refer to an instance of a MAC,
-- PORT, PATH, or ATTACHMENT Resource ID. Indexing begins
-- at 1. Zero is used to indicate the absence of a resource.
FddiSMTStationIdType ::= OCTET STRING (SIZE (8))
-- The unique identifier for the FDDI station. This is a
-- string of 8 octets, represented as
-- X' yy yy xx xx xx xx xx xx'
-- with the low order 6 octet (xx) from a unique IEEE
-- assigned address. The high order two bits of the IEEE
-- address, the group address bit and the administration bit
-- (Universal/Local) bit should both be zero. The first two
-- octets, the yy octets, are implementor-defined.
--
-- The representation of the address portion of the station id
-- is in the IEEE (ANSI/IEEE P802.1A) canonical notation for
-- 48 bit addresses. The canonical form is a 6-octet string
-- where the first octet contains the first 8 bits of the
-- address, with the I/G(Individual/Group) address bit as the
-- least significant bit and the U/L (Universal/Local) bit
-- as the next more significant bit, and so on. Note that
-- addresses in the ANSI FDDI standard SMT frames are
-- represented in FDDI MAC order.
FddiMACLongAddressType ::= OCTET STRING (SIZE (6))
-- The representation of long MAC addresses as management
-- values is in the IEEE (ANSI/IEEE P802.1A) canonical
-- notation for 48 bit addresses. The canonical form is a
-- 6-octet string where the first octet contains the first 8
-- bits of the address, with the I/G (Individual/Group)
-- address bit as the least significant bit and the U/L
-- (Universal/Local) bit as the next more significant bit,
-- and so on. Note that the addresses in the SMT frames are
-- represented in FDDI MAC order.
-- groups in the FDDI MIB module
snmpFddiSMT OBJECT IDENTIFIER ::= { fddi 1 }
snmpFddiMAC OBJECT IDENTIFIER ::= { fddi 2 }
snmpFddiPATH OBJECT IDENTIFIER ::= { fddi 3 }
snmpFddiPORT OBJECT IDENTIFIER ::= { fddi 4 }
snmpFddiATTACHMENT OBJECT IDENTIFIER ::= { fddi 5 }
snmpFddiChipSets OBJECT IDENTIFIER ::= { fddi 6 }
-- the SMT group
-- Implementation of the SMT group is mandatory for all
-- systems which implement manageable FDDI subsystems.
snmpFddiSMTNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of SMT implementations (regardless of
their current state) on this network management
application entity. The value for this variable
must remain constant at least from one re-
initialization of the entity's network management
system to the next re-initialization."
::= { snmpFddiSMT 1 }
-- the SMT table
snmpFddiSMTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpFddiSMTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of SMT entries. The number of entries is
given by the value of snmpFddiSMTNumber."
::= { snmpFddiSMT 2 }
snmpFddiSMTEntry OBJECT-TYPE
SYNTAX SnmpFddiSMTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An SMT entry containing information common to a
given SMT."
INDEX { snmpFddiSMTIndex }
::= { snmpFddiSMTTable 1 }
SnmpFddiSMTEntry ::=
SEQUENCE {
snmpFddiSMTIndex
INTEGER,
snmpFddiSMTStationId
FddiSMTStationIdType,
snmpFddiSMTOpVersionId
INTEGER,
snmpFddiSMTHiVersionId
INTEGER,
snmpFddiSMTLoVersionId
INTEGER,
snmpFddiSMTMACCt
INTEGER,
snmpFddiSMTNonMasterCt
INTEGER,
snmpFddiSMTMasterCt
INTEGER,
snmpFddiSMTPathsAvailable
INTEGER,
snmpFddiSMTConfigCapabilities
INTEGER,
snmpFddiSMTConfigPolicy
INTEGER,
snmpFddiSMTConnectionPolicy
INTEGER,
snmpFddiSMTTNotify
INTEGER,
snmpFddiSMTStatusReporting
INTEGER,
snmpFddiSMTECMState
INTEGER,
snmpFddiSMTCFState
INTEGER,
snmpFddiSMTHoldState
INTEGER,
snmpFddiSMTRemoteDisconnectFlag
INTEGER,
snmpFddiSMTStationAction
INTEGER
}
snmpFddiSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization."
::= { snmpFddiSMTEntry 1 }
snmpFddiSMTStationId OBJECT-TYPE
SYNTAX FddiSMTStationIdType -- OCTET STRING (SIZE (8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Uniquely identifies an FDDI station."
REFERENCE
"ANSI { fddiSMT 11 }"
::= { snmpFddiSMTEntry 2 }
snmpFddiSMTOpVersionId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The version that this station is using for its
operation (refer to ANSI 7.1.2.2)."
REFERENCE
"ANSI { fddiSMT 13 }"
::= { snmpFddiSMTEntry 3 }
snmpFddiSMTHiVersionId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The highest version of SMT that this station
supports (refer to ANSI 7.1.2.2)."
REFERENCE
"ANSI { fddiSMT 14 }"
::= { snmpFddiSMTEntry 4 }
snmpFddiSMTLoVersionId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The lowest version of SMT that this station
supports (refer to ANSI 7.1.2.2)."
REFERENCE
"ANSI { fddiSMT 15 }"
::= { snmpFddiSMTEntry 5 }
snmpFddiSMTMACCt OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MACs in the station or
concentrator."
REFERENCE
"ANSI { fddiSMT 21 }"
::= { snmpFddiSMTEntry 6 }
snmpFddiSMTNonMasterCt OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Non Master PORTs (A, B, or S PORTs)
in the station or concentrator."
REFERENCE
"ANSI { fddiSMT 22 }"
::= { snmpFddiSMTEntry 7 }
snmpFddiSMTMasterCt OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of Master PORTs in a node. If the
node is not a concentrator, the value is zero."
REFERENCE
"ANSI { fddiSMT 23 }"
::= { snmpFddiSMTEntry 8 }
snmpFddiSMTPathsAvailable OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates the PATH types available
in the station.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this node has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2
For example, a station having Primary and Local
PATHs available would have a value of 5 (2**0 +
2**2)."
REFERENCE
"ANSI { fddiSMT 24 }"
::= { snmpFddiSMTEntry 9 }
snmpFddiSMTConfigCapabilities OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates capabilities that are
present in the node. If 'holdAvailable' is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2). If
'CF-Wrap-AB' is present, this indicates that the
WRAP_AB state is forced.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1 "
REFERENCE
"ANSI { fddiSMT 25 }"
::= { snmpFddiSMTEntry 10 }
snmpFddiSMTConfigPolicy OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value that indicates the configuration policies
currently enforced in the node (refer to ANSI SMT
9.4.3.2). The 'configurationHold' policy refers
to the Hold flag, and should not be present only
if the Hold function is supported. The 'CF-Wrap-
AB' policy refers to the CF_Wrap_AB flag.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
configurationHold 0
CF-Wrap-AB 1 "
REFERENCE
"ANSI { fddiSMT 26 }"
::= { snmpFddiSMTEntry 11 }
snmpFddiSMTConnectionPolicy OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value that indicates the connection policies
enforced at the station. A station sets the
corresponding policy for each of the connection
types that it rejects. The letter designations, X
and Y, in the 'rejectX-Y' names have the following
significance: X represents the PC-Type of the
local PORT and Y represents a PC-Neighbor in the
evaluation of Connection-Policy (PC-Type, PC-
Neighbor) that is done to determine the setting of
T-Val(3) in the PC-Signaling sequence (refer to
ANSI Section 9.6.3).
The value is a sum. This value initially takes
the value zero, then for each of the connection
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
rejectA-A 0
rejectA-B 1
rejectA-S 2
rejectA-M 3
rejectB-A 4
rejectB-B 5
rejectB-S 6
rejectB-M 7
rejectS-A 8
rejectS-B 9
rejectS-S 10
rejectS-M 11
rejectM-A 12
rejectM-B 13
rejectM-S 14
rejectM-M 15
Implementors should note that the polarity of
these bits is different in different places in an
SMT system. Implementors should take appropriate
care."
REFERENCE
"ANSI { fddiSMT 27 }"
::= { snmpFddiSMTEntry 12 }
snmpFddiSMTTNotify OBJECT-TYPE
SYNTAX INTEGER (2..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The timer used in the Neighbor Notification
protocol, reported in seconds and ranging from 2
to 30 seconds (refer to ANSI SMT 8.3.1)."
REFERENCE
"ANSI { fddiSMT 29 }"
::= { snmpFddiSMTEntry 13 }
snmpFddiSMTStatusReporting OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the node implements the Status
Reporting Protocol. This object is included for
compatibility with products that were designed
prior to the adoption of this standard."
REFERENCE
"ANSI { fddiSMT 30 }"
::= { snmpFddiSMTEntry 14 }
snmpFddiSMTECMState OBJECT-TYPE
SYNTAX INTEGER {
ec0(1), -- Out
ec1(2), -- In
ec2(3), -- Trace
ec3(4), -- Leave
ec4(5), -- Path_Test
ec5(6), -- Insert
ec6(7), -- Check
ec7(8) -- Deinsert
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current state of the ECM state
machine (refer to ANSI SMT 9.5.2)."
REFERENCE
"ANSI { fddiSMT 41 }"
::= { snmpFddiSMTEntry 15 }
snmpFddiSMTCFState OBJECT-TYPE
SYNTAX INTEGER {
cf0(1), -- Isolated
cf1(2), -- Wrap_S
cf2(3), -- Wrap_A
cf3(4), -- Wrap_B
cf4(5), -- Wrap_AB
cf5(6) -- Thru
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The attachment configuration for the station or
concentrator (refer to ANSI SMT 9.7.4.3)."
REFERENCE
"ANSI { fddiSMT 42 }"
::= { snmpFddiSMTEntry 16 }
snmpFddiSMTHoldState OBJECT-TYPE
SYNTAX INTEGER {
not-implemented(1), -- holding not implemented
not-holding(2),
holding-prm(3), -- holding on primary
holding-sec(4) -- holding on secondary
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the current state of the
Hold function. The values are determined as
follows: 'holding-prm' is set if the primary ring
is operational and the Recovery Enable Flag is
clear (NOT NO_Flag(primary) AND NOT RE_Flag). is
set if the secondary ring is operational and the
Recovery Enable Flag is clear (NOT
NO_Flag(secondary) AND NOT RE_Flag). Ref 9.4.3.
and 10.3.1. the primary or secondary, i.e., the
Recovery Enable, RE_Flag, is set."
REFERENCE
"ANSI { fddiSMT 43 }"
::= { snmpFddiSMTEntry 17 }
snmpFddiSMTRemoteDisconnectFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag indicating that the station was remotely
disconnected from the network. A station requires
a Connect Action (SM_CM_CONNECT.request (Connect))
to rejoin and clear the flag (refer to ANSI
6.4.5.2)."
REFERENCE
"ANSI { fddiSMT 44 }"
::= { snmpFddiSMTEntry 18 }
snmpFddiSMTStationAction OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
connect(2),
disconnect(3),
path-Test(4),
self-Test(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5)."
REFERENCE
"ANSI { fddiSMT 60 }"
::= { snmpFddiSMTEntry 19 }
-- the MAC group
-- Implementation of the MAC Group is mandatory for all
-- systems which implement manageable FDDI subsystems.
snmpFddiMACNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of MAC implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization."
::= { snmpFddiMAC 1 }
-- the MAC table
snmpFddiMACTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpFddiMACEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of MAC entries. The number of entries is
given by the value of snmpFddiMACNumber."
::= { snmpFddiMAC 2 }
snmpFddiMACEntry OBJECT-TYPE
SYNTAX SnmpFddiMACEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A MAC entry containing information common to a
given MAC."
INDEX { snmpFddiMACSMTIndex, snmpFddiMACIndex }
::= { snmpFddiMACTable 1 }
SnmpFddiMACEntry ::=
SEQUENCE {
snmpFddiMACSMTIndex
INTEGER,
snmpFddiMACIndex
INTEGER,
snmpFddiMACFrameStatusCapabilities
INTEGER,
snmpFddiMACTMaxGreatestLowerBound
FddiTime,
snmpFddiMACTVXGreatestLowerBound
FddiTime,
snmpFddiMACPathsAvailable
INTEGER,
snmpFddiMACCurrentPath
INTEGER,
snmpFddiMACUpstreamNbr
FddiMACLongAddressType,
snmpFddiMACOldUpstreamNbr
FddiMACLongAddressType,
snmpFddiMACDupAddrTest
INTEGER,
snmpFddiMACPathsRequested
INTEGER,
snmpFddiMACDownstreamPORTType
INTEGER,
snmpFddiMACSMTAddress
FddiMACLongAddressType,
snmpFddiMACTReq
FddiTime,
snmpFddiMACTNeg
FddiTime,
snmpFddiMACTMax
FddiTime,
snmpFddiMACTvxValue
FddiTime,
snmpFddiMACTMin
FddiTime,
snmpFddiMACCurrentFrameStatus
INTEGER,
snmpFddiMACFrameCts
Counter,
snmpFddiMACErrorCts
Counter,
snmpFddiMACLostCts
Counter,
snmpFddiMACFrameErrorThreshold
INTEGER,
snmpFddiMACFrameErrorRatio
INTEGER,
snmpFddiMACRMTState
INTEGER,
snmpFddiMACDaFlag
INTEGER,
snmpFddiMACUnaDaFlag
INTEGER,
snmpFddiMACFrameCondition
INTEGER,
snmpFddiMACChipSet
OBJECT IDENTIFIER,
snmpFddiMACAction
INTEGER
}
snmpFddiMACSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the SMT index associated with this
MAC."
::= { snmpFddiMACEntry 1 }
snmpFddiMACIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each MAC on the managed
entity. The MAC identified by a particular value
of this index is that identified by the same value
of an ifIndex object instance. That is, if a MAC
is associated with the interface whose value of
ifIndex in the Internet-Standard MIB is equal to
5, then the value of snmpFddiMACIndex shall also
equal 5. The value for each MAC must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization."
::= { snmpFddiMACEntry 2 }
snmpFddiMACFrameStatusCapabilities OBJECT-TYPE
SYNTAX INTEGER (0..1799)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates the MAC's bridge and end-
station capabilities for operating in a bridged
FDDI network.
The value is a sum. This value initially takes
the value zero, then for each capability present,
2 raised to a power is added to the sum. The
powers are according to the following table:
Capability Power
FSC-Type0 0
-- MAC repeats A/C indicators as received on
-- copying with the intent to forward.
FSC-Type1 1
-- MAC sets C but not A on copying for
-- forwarding.
FSC-Type2 2
-- MAC resets C and sets A on C set and
-- A reset if the frame is not copied and the
-- frame was addressed to this MAC
FSC-Type0-programmable 8
-- Type0 capability is programmable
FSC-Type1-programmable 9
-- Type1 capability is programmable
FSC-Type2-programmable 10
-- Type2 capability is programmable
"
REFERENCE
"ANSI { fddiMAC 11 }"
::= { snmpFddiMACEntry 3 }
snmpFddiMACTMaxGreatestLowerBound OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The greatest lower bound of T_Max supported for
this MAC."
REFERENCE
"ANSI { fddiMAC 13 }"
::= { snmpFddiMACEntry 4 }
snmpFddiMACTVXGreatestLowerBound OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The greatest lower bound of TVX supported for
this MAC."
REFERENCE
"ANSI { fddiMAC 14 }"
::= { snmpFddiMACEntry 5 }
snmpFddiMACPathsAvailable OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates the PATH types available
for this MAC.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this MAC has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2 "
REFERENCE
"ANSI { fddiMAC 22 }"
::= { snmpFddiMACEntry 6 }
snmpFddiMACCurrentPath OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
primary(2),
secondary(4),
local(8),
isolated(16)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the association of the MAC with a
station PATH."
REFERENCE
"ANSI { fddiMAC 23 }"
::= { snmpFddiMACEntry 7 }
snmpFddiMACUpstreamNbr OBJECT-TYPE
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC's upstream neighbor's long individual MAC
address. It may be determined by the Neighbor
Information Frame protocol (refer to ANSI SMT
7.2.1). The value shall be reported as '00 00 00
00 00 00' if it is unknown."
REFERENCE
"ANSI { fddiMAC 24 }"
::= { snmpFddiMACEntry 8 }
snmpFddiMACOldUpstreamNbr OBJECT-TYPE
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The previous value of the MAC's upstream
neighbor's long individual MAC address. It may be
determined by the Neighbor Information Frame
protocol (refer to ANSI SMT 7.2.1). The value
shall be reported as '00 00 00 00 00 00' if it is
unknown."
REFERENCE
"ANSI { fddiMAC 26 }"
::= { snmpFddiMACEntry 9 }
snmpFddiMACDupAddrTest OBJECT-TYPE
SYNTAX INTEGER { none(1), pass(2), fail(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Duplicate Address Test flag, Dup_Addr_Test
(refer to ANSI 8.3.1)."
REFERENCE
"ANSI { fddiMAC 29 }"
::= { snmpFddiMACEntry 10 }
snmpFddiMACPathsRequested OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value that indicates PATH(s) desired for this
MAC.
The value is a sum which represents the individual
PATHs that are desired. This value initially
takes the value zero, then for each type of PATH
that this node is, 2 raised to a power is added to
the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2
Isolated 3
The precedence order is primary, secondary, local,
and then isolated if multiple PATHs are desired
are set."
REFERENCE
"ANSI { fddiMAC 32 }"
::= { snmpFddiMACEntry 11 }
snmpFddiMACDownstreamPORTType OBJECT-TYPE
SYNTAX INTEGER { a(1), b(2), s(3), m(4), unknown(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the PC-Type of the first port that is
downstream of this MAC (the exit port)."
REFERENCE
"ANSI { fddiMAC 33 }"
::= { snmpFddiMACEntry 12 }
snmpFddiMACSMTAddress OBJECT-TYPE
SYNTAX FddiMACLongAddressType -- OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The 48 bit individual address of the MAC used for
SMT frames."
REFERENCE
"ANSI { fddiMAC 41 }"
::= { snmpFddiMACEntry 13 }
snmpFddiMACTReq OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of T-Req (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2)."
REFERENCE
"ANSI { fddiMAC 51 }"
::= { snmpFddiMACEntry 14 }
snmpFddiMACTNeg OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of T-Neg (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2)."
REFERENCE
"ANSI { fddiMAC 52 }"
::= { snmpFddiMACEntry 15 }
snmpFddiMACTMax OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of T-Max (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2)."
REFERENCE
"ANSI { fddiMAC 53 }"
::= { snmpFddiMACEntry 16 }
snmpFddiMACTvxValue OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of TvxValue (refer to ANSI MAC 2.2.1
and ANSI MAC 7.3.5.2)."
REFERENCE
"ANSI { fddiMAC 54 }"
::= { snmpFddiMACEntry 17 }
snmpFddiMACTMin OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of T-Min (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2)."
REFERENCE
"ANSI { fddiMAC 55 }"
::= { snmpFddiMACEntry 18 }
snmpFddiMACCurrentFrameStatus OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value that indicates the MAC's operational
frame status setting functionality.
The value is a sum. This value initially takes
the value zero, then for each functionality
present, 2 raised to a power is added to the sum.
The powers are according to the following table:
Functionality Power
FSC-Type0 0
-- MAC repeats A/C indicators as received
FSC-Type1 1
-- MAC sets C but not A on copying for
-- forwarding
FSC-Type2 2
-- MAC resets C and sets A on C set and A
-- reset if frame is not copied
"
REFERENCE
"ANSI { fddiMAC 63 }"
::= { snmpFddiMACEntry 19 }
snmpFddiMACFrameCts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame_Ct (refer to ANSI MAC 2.2.1)."
REFERENCE
"ANSI { fddiMAC 71 }"
::= { snmpFddiMACEntry 20 }
snmpFddiMACErrorCts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Error_Ct (refer to ANSI MAC 2.2.1)."
REFERENCE
"ANSI { fddiMAC 81 }"
::= { snmpFddiMACEntry 21 }
snmpFddiMACLostCts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lost_Ct (refer to ANSI MAC 2.2.1)."
REFERENCE
"ANSI { fddiMAC 82 }"
::= { snmpFddiMACEntry 22 }
snmpFddiMACFrameErrorThreshold OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A threshold for determining when a MAC Condition
report should be generated. The condition is true
when the ratio, ((delta snmpFddiMACLostCt + delta
snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt +
delta snmpFddiMACLostCt)) x 2**16. exceeds the
threshold. It is used to determine when a station
has an unacceptable frame error threshold. The
sampling algorithm is implementation dependent.
Any attempt to set this variable to a value of
less than one shall result in a badValue error.
Those who are familiar with the SNMP management
framework will recognize that thresholds are not
in keeping with the SNMP philosophy. However,
this variable is supported by underlying SMT
implementations already and maintaining this
threshold should not pose an undue additional
burden on SNMP agent implementors."
REFERENCE
"ANSI { fddiMAC 95 }"
::= { snmpFddiMACEntry 23 }
snmpFddiMACFrameErrorRatio OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the actual ratio, ((delta
snmpFddiMACLostCt + delta snmpFddiMACErrorCt) /
(delta snmpFddiMACFrameCt + delta
snmpFddiMACLostCt)) x 2**16."
REFERENCE
"ANSI { fddiMAC 96 }"
::= { snmpFddiMACEntry 24 }
snmpFddiMACRMTState OBJECT-TYPE
SYNTAX INTEGER {
rm0(1), -- Isolated
rm1(2), -- Non_Op
rm2(3), -- Ring_Op
rm3(4), -- Detect
rm4(5), -- Non_Op_Dup
rm5(6), -- Ring_Op_Dup
rm6(7), -- Directed
rm7(8) -- Trace
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current state of the Ring
Management state machine (refer to ANSI Section
10)."
REFERENCE
"ANSI { fddiMAC 111 }"
::= { snmpFddiMACEntry 25 }
snmpFddiMACDaFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RMT flag Duplicate Address Flag, DA_Flag
(refer to ANSI 10.3.1.2)."
REFERENCE
"ANSI { fddiMAC 112 }"
::= { snmpFddiMACEntry 26 }
snmpFddiMACUnaDaFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A flag set when the upstream neighbor reports a
duplicate address condition. Reset when the
condition clears."
REFERENCE
"ANSI { fddiMAC 113 }"
::= { snmpFddiMACEntry 27 }
snmpFddiMACFrameCondition OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the MAC Condition is active when set.
Cleared when the condition clears and on power
up."
REFERENCE
"ANSI { fddiMAC 114 }"
::= { snmpFddiMACEntry 28 }
snmpFddiMACChipSet OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the MAC function. A few OBJECT
IDENTIFIERS are identified elsewhere in this memo.
For those The assignment of additional OBJECT
IDENTIFIERs to various types of hardware chip sets
is managed by the IANA. For example, vendors
whose chip sets are not defined in this memo may
request a number from the Internet Assigned
Numbers Authority (IANA) which indicates the
assignment of a enterprise specific subtree which,
among other things, may be used to allocate OBJECT
IDENTIFIER assignments for that enterprise's chip
sets. Similarly, in the absence of an
appropriately assigned OBJECT IDENTIFIER in this
memo or in an enterprise specific subtree of a
chip vendor, a board or system vendor can request
a number for a subtree from the IANA and make an
appropriate assignment. It is desired that,
whenever possible, the same OBJECT IDENTIFIER be
used for all chips of a given type. Consequently,
the assignment made in this memo for a chip, if
any, should be used in preference to any other
assignment and the assignment made by the chip
manufacturer, if any, should be used in preference
to assignments made by users of those chips. If
the hardware chip set is unknown, the object
identifier
unknownChipSet OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownChipSet is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER
must be able to generate and recognize this
value."
::= { snmpFddiMACEntry 29 }
snmpFddiMACAction OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
enableLLCService(2),
disableLLCService(3),
connectMAC(4),
disconnectMAC(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue
error.
enableLLCService: enables MAC service to
higher layers.
disableLLCService: disables MAC service to
higher layers.
connectMAC: connect this MAC in
station.
disconnectMAC: disconnect this MAC in
station.
Attempts to set this object to all other values
results in a badValue error."
REFERENCE
"ANSI { fddiMAC 130 }"
::= { snmpFddiMACEntry 30 }
-- the PATH group
-- the PATH group is empty for now and shall remain so until
-- the ANSI community sorts out their PATH group
-- the PORT group
-- Implementation of the PORT group is mandatory for all
-- systems which implement manageable FDDI subsystems.
snmpFddiPORTNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of PORT implementations (across
all SMTs) on this network management application
entity. The value for this variable must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization."
::= { snmpFddiPORT 1 }
-- the PORT table
snmpFddiPORTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpFddiPORTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of PORT entries. The number of entries is
given by the value of snmpFddiPORTNumber."
::= { snmpFddiPORT 2 }
snmpFddiPORTEntry OBJECT-TYPE
SYNTAX SnmpFddiPORTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A PORT entry containing information common to a
given PORT."
INDEX { snmpFddiPORTSMTIndex, snmpFddiPORTIndex }
::= { snmpFddiPORTTable 1 }
SnmpFddiPORTEntry ::=
SEQUENCE {
snmpFddiPORTSMTIndex
INTEGER,
snmpFddiPORTIndex
INTEGER,
snmpFddiPORTPCType
INTEGER,
snmpFddiPORTPCNeighbor
INTEGER,
snmpFddiPORTConnectionPolicies
INTEGER,
snmpFddiPORTRemoteMACIndicated
INTEGER,
snmpFddiPORTCEState
INTEGER,
snmpFddiPORTPathsRequested
INTEGER,
snmpFddiPORTMACPlacement
FddiResourceId,
snmpFddiPORTAvailablePaths
INTEGER,
snmpFddiPORTMACLoopTime
FddiTime,
snmpFddiPORTTBMax
FddiTime,
snmpFddiPORTBSFlag
INTEGER,
snmpFddiPORTLCTFailCts
Counter,
snmpFddiPORTLerEstimate
INTEGER,
snmpFddiPORTLemRejectCts
Counter,
snmpFddiPORTLemCts
Counter,
snmpFddiPORTLerCutoff
INTEGER,
snmpFddiPORTLerAlarm
INTEGER,
snmpFddiPORTConnectState
INTEGER,
snmpFddiPORTPCMState
INTEGER,
snmpFddiPORTPCWithhold
INTEGER,
snmpFddiPORTLerCondition
INTEGER,
snmpFddiPORTChipSet
OBJECT IDENTIFIER,
snmpFddiPORTAction
INTEGER
}
snmpFddiPORTSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the SMT index associated with this
PORT."
::= { snmpFddiPORTEntry 1 }
snmpFddiPORTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each PORT within a given SMT.
Its value ranges between 1 and the sum of the
values of snmpFddiSMTNonMasterCt
{ snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt
{ snmpFddiSMTEntry 7 } on the given SMT. The
value for each PORT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization."
::= { snmpFddiPORTEntry 2 }
snmpFddiPORTPCType OBJECT-TYPE
SYNTAX INTEGER { a(1), b(2), s(3), m(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PC_Type (refer to ANSI SMT 9.2.2 and ANSI SMT
9.6.3.2)."
REFERENCE
"ANSI { fddiPORT 12 }"
::= { snmpFddiPORTEntry 3 }
snmpFddiPORTPCNeighbor OBJECT-TYPE
SYNTAX INTEGER { a(1), b(2), s(3), m(4), unknown(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2) (refer
to ANSI SMT 9.6.3.2)."
REFERENCE
"ANSI { fddiPORT 13 }"
::= { snmpFddiPORTEntry 4 }
snmpFddiPORTConnectionPolicies OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value that indicates the node's PORT policies.
Pc-MAC-LCT, Pc-MAC-Loop, and Pc-MAC-Placement
indicate how the respective PC Signaling
Capability flags should be set (refer to ANSI SMT
9.4.3.2).
The value is a sum. This value initially takes
the value zero, then for each PORT policy, 2
raised to a power is added to the sum. The powers
are according to the following table:
Policy Power
Pc-MAC-LCT 0
Pc-MAC-Loop 1
Pc-MAC-Placement 2 "
REFERENCE
"ANSI { fddiPORT 14 }"
::= { snmpFddiPORTEntry 5 }
snmpFddiPORTRemoteMACIndicated OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The indication, in PC-Signaling that the remote
partner intends to place a MAC in the output token
PATH of this PORT. Signaled as R_Val (9) (refer
to ANSI SMT 9.6.3.2)."
REFERENCE
"ANSI { fddiPORT 15 }"
::= { snmpFddiPORTEntry 6 }
snmpFddiPORTCEState OBJECT-TYPE
SYNTAX INTEGER {
ce0(1), -- Isolated
ce1(2), -- Insert_P
ce2(3), -- Insert_S
ce3(4), -- Insert_X
ce4(5) -- Local
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current state of PORT's
Configuration Element (CE) (refer to ANSI 9.7.5).
Note that this value represents the Current Path
information for this PORT."
REFERENCE
"ANSI { fddiPORT 16 }"
::= { snmpFddiPORTEntry 7 }
snmpFddiPORTPathsRequested OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A value that indicates the desired association(s)
of the port with a station PATH. The 'Primary'
Path is the default. The value of 'Secondary' is
only meaningful for S (slave) or M (master) PORT
PC-Types. This value effects the setting of the
CF_Insert_S, and CF_Insert_L flags (refer to ANSI
Section 9.4.3). If the 'Primary' PATH is present,
then the Primary PATH (the default PATH) is
selected. If the 'Secondary' PATH is present and
the 'Primary' PATH is not present, then the
CF_Insert_S flag is set. If the 'Local' PATH is
sent and neither the 'Primary' or 'Secondary'
PATHs are sent, then the CF_Insert_L flag is set.
The value is a sum. This value initially takes
the value zero, then for each type of PATH
desired, 2 raised to a power is added to the sum.
The powers are according to the following table:
Path Power
Primary 0
Secondary 1
Local 2
Isolated 3 "
REFERENCE
"ANSI { fddiPORT 17 }"
::= { snmpFddiPORTEntry 8 }
snmpFddiPORTMACPlacement OBJECT-TYPE
SYNTAX FddiResourceId -- INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the upstream MAC, if any, that is
associated with the PORT. The value shall be zero
if there is no MAC associated with the PORT.
Otherwise, the value shall be equal to the value
of snmpFddiMACIndex associated with the MAC."
REFERENCE
"ANSI { fddiPORT 18 }"
::= { snmpFddiPORTEntry 9 }
snmpFddiPORTAvailablePaths OBJECT-TYPE
SYNTAX INTEGER (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates the PATH types available
for M and S PORTs.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this port has available, 2 raised to a power is
added to the sum. The powers are according to the
following table:
Path Power
Primary 0
Secondary 1
Local 2 "
REFERENCE
"ANSI { fddiPORT 19 }"
::= { snmpFddiPORTEntry 10 }
snmpFddiPORTMACLoopTime OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Time for the optional MAC Local Loop, T_Next(9),
which is greater-than or equal-to 200 milliseconds
(refer to ANSI SMT 9.4.4.2.3)."
REFERENCE
"ANSI { fddiPORT 21 }"
::= { snmpFddiPORTEntry 11 }
snmpFddiPORTTBMax OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"TB_Max (refer to ANSI SMT 9.4.4.2.1)."
REFERENCE
"ANSI { fddiPORT 32 }"
::= { snmpFddiPORTEntry 12 }
snmpFddiPORTBSFlag OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Break State, BS_Flag (refer to ANSI SMT
9.4.3.4)."
REFERENCE
"ANSI { fddiPORT 33 }"
::= { snmpFddiPORTEntry 13 }
snmpFddiPORTLCTFailCts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The count of the consecutive times the link
confidence test (LCT) has failed during connection
management (refer to ANSI 9.4.1)."
REFERENCE
"ANSI { fddiPORT 42 }"
::= { snmpFddiPORTEntry 14 }
snmpFddiPORTLerEstimate OBJECT-TYPE
SYNTAX INTEGER (4..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A long term average link error rate. It ranges
from 10**-4 to 10**-15 and is reported as the
absolute value of the exponent of the estimate."
REFERENCE
"ANSI { fddiPORT 51 }"
::= { snmpFddiPORTEntry 15 }
snmpFddiPORTLemRejectCts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A link error monitoring count of the times that a
link has been rejected."
REFERENCE
"ANSI { fddiPORT 52 }"
::= { snmpFddiPORTEntry 16 }
snmpFddiPORTLemCts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The aggregate link error monitor error count, set
to zero only on station power_up."
REFERENCE
"ANSI { fddiPORT 53 }"
::= { snmpFddiPORTEntry 17 }
snmpFddiPORTLerCutoff OBJECT-TYPE
SYNTAX INTEGER (4..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The link error rate estimate at which a link
connection will be broken. It ranges from 10**-4
to 10**-15 and is reported as the absolute value
of the exponent."
REFERENCE
"ANSI { fddiPORT 58 }"
::= { snmpFddiPORTEntry 18 }
snmpFddiPORTLerAlarm OBJECT-TYPE
SYNTAX INTEGER (4..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The link error rate estimate at which a link
connection will generate an alarm. It ranges from
10**-4 to 10**-15 and is reported as the absolute
value of the exponent of the estimate."
REFERENCE
"ANSI { fddiPORT 59 }"
::= { snmpFddiPORTEntry 19 }
snmpFddiPORTConnectState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
connecting(2),
standby(3),
active(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of the connect state of this PORT.
Basically, this gives a higher level view of the
state of the connection by grouping PCM states and
the PC-Withhold flag state. The supported values
and their corresponding PCM states and PC-Withhold
condition, when relevant, are:
disabled: (PC0:Off, PC9:Maint)
connecting: (PC1(Break) || PC3 (Connect) || PC4
(Next) || PC5 (Signal) || PC6
(Join) || PC7 (Verify)) &&
(PC_Withhold = None)
standby: (NOT PC_Withhold == None)
active: (PC2:Trace || PC8:Active) "
REFERENCE
"ANSI { fddiPORT 61 }"
::= { snmpFddiPORTEntry 20 }
snmpFddiPORTPCMState OBJECT-TYPE
SYNTAX INTEGER {
pc0(1), -- Off
pc1(2), -- Break
pc2(3), -- Trace
pc3(4), -- Connect
pc4(5), -- Next
pc5(6), -- Signal
pc6(7), -- Join
pc7(8), -- Verify
pc8(9), -- Active
pc9(10) -- Maint
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"(refer to SMT 9.6.2)."
REFERENCE
"ANSI { fddiPORT 62 }"
::= { snmpFddiPORTEntry 21 }
snmpFddiPORTPCWithhold OBJECT-TYPE
SYNTAX INTEGER { none(1), m-m(2), other(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PC_Withhold, (refer to ANSI SMT 9.4.1)."
REFERENCE
"ANSI { fddiPORT 63 }"
::= { snmpFddiPORTEntry 22 }
snmpFddiPORTLerCondition OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is set to true whenever LerEstimate
is less than or equal to LerAlarm."
REFERENCE
"ANSI { fddiPORT 64 }"
::= { snmpFddiPORTEntry 23 }
snmpFddiPORTChipSet OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the PORT (PHY) function. A few
OBJECT IDENTIFIERS are identified elsewhere in
this memo. For those The assignment of additional
OBJECT IDENTIFIERs to various types of hardware
chip sets is managed by the IANA. For example,
vendors whose chip sets are not defined in this
memo may request a number from the Internet
Assigned Numbers Authority (IANA) which indicates
the assignment of a enterprise specific subtree
which, among other things, may be used to allocate
OBJECT IDENTIFIER assignments for that
enterprise's chip sets. Similarly, in the absence
of an appropriately assigned OBJECT IDENTIFIER in
this memo or in an enterprise specific subtree of
a chip vendor, a board or system vendor can
request a number for a subtree from the IANA and
make an appropriate assignment. It is desired
that, whenever possible, the same OBJECT
IDENTIFIER be used for all chips of a given type.
Consequently, the assignment made in this memo for
a chip, if any, should be used in preference to
any other assignment and the assignment made by
the chip manufacturer, if any, should be used in
preference to assignments made by users of those
chips. If the hardware chip set is unknown, the
object identifier
unknownChipSet OBJECT IDENTIFIER ::= { 0 0 }
is returned. Note that unknownChipSet is a
syntactically valid object identifier, and any
conformant implementation of ASN.1 and the BER
must be able to generate and recognize this
value."
::= { snmpFddiPORTEntry 24 }
snmpFddiPORTAction OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
maintPORT(2),
enablePORT(3),
disablePORT(4),
startPORT(5),
stopPORT(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
maintPORT: Signal PC_Maint
enablePORT: Signal PC_Enable
disablePORT: Signal PC_Disable
startPORT: Signal PC_Start
stopPORT: Signal PC_Stop
Signals cause an SM_CM_CONTROL.request service to
be generated with a control_action of `Signal' and
the `variable' parameter set with the appropriate
value (i.e., PC_Maint, PC_Enable, PC_Disable,
PC_Start, PC_Stop). Ref. ANSI SMT Section 9.3.2.
Attempts to set this object to all other values
results in a badValue error."
REFERENCE
"ANSI { fddiPORT 70 }"
::= { snmpFddiPORTEntry 25 }
-- the ATTACHMENT group
-- Implementation of the ATTACHMENT group is mandatory for
-- all systems which implement manageable FDDI subsystems.
snmpFddiATTACHMENTNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of attachments (across all SMTs)
on this network management application entity.
The value for this variable must remain constant
at least from one re-initialization of the
entity's network management system to the next
re-initialization."
::= { snmpFddiATTACHMENT 1 }
-- the ATTACHMENT table
snmpFddiATTACHMENTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpFddiATTACHMENTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of ATTACHMENT entries. The number of
entries is given by the value of
snmpFddiATTACHMENTNumber."
::= { snmpFddiATTACHMENT 2 }
snmpFddiATTACHMENTEntry OBJECT-TYPE
SYNTAX SnmpFddiATTACHMENTEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An ATTACHMENT entry containing information common
to a given set of ATTACHMENTs.
The ATTACHMENT Resource represents a PORT or a
pair of PORTs plus the optional associated optical
bypass that are managed as a functional unit.
Because of its relationship to the PORT Objects,
there is a natural association of ATTACHMENT
Resource Indices to the PORT Indices. The
resource index for the ATTACHMENT is equal to the
associated PORT index for 'single-attachment' and
'concentrator' type snmpFddiATTACHMENTClasses.
For 'dual-attachment' Classes, the ATTACHMENT
Index is the PORT Index of the A PORT of the A/B
PORT Pair that represents the ATTACHMENT."
INDEX { snmpFddiATTACHMENTSMTIndex,
snmpFddiATTACHMENTIndex }
::= { snmpFddiATTACHMENTTable 1 }
SnmpFddiATTACHMENTEntry ::=
SEQUENCE {
snmpFddiATTACHMENTSMTIndex
INTEGER,
snmpFddiATTACHMENTIndex
INTEGER,
snmpFddiATTACHMENTClass
INTEGER,
snmpFddiATTACHMENTOpticalBypassPresent
INTEGER,
snmpFddiATTACHMENTIMaxExpiration
FddiTime,
snmpFddiATTACHMENTInsertedStatus
INTEGER,
snmpFddiATTACHMENTInsertPolicy
INTEGER
}
snmpFddiATTACHMENTSMTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the SMT index associated with this
ATTACHMENT."
::= { snmpFddiATTACHMENTEntry 1 }
snmpFddiATTACHMENTIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each ATTACHMENT on a given
SMT. Its value ranges between 1 and the sum of
the values of snmpFddiSMTNonMasterCt {
snmpFddiSMTEntry 6 } and snmpFddiSMTMasterCt {
snmpFddiSMTEntry 7 } on the given SMT. The value
for each ATTACHMENT must remain constant at least
from one re-initialization of the entity's network
management system to the next re-initialization."
::= { snmpFddiATTACHMENTEntry 2 }
snmpFddiATTACHMENTClass OBJECT-TYPE
SYNTAX INTEGER {
single-attachment(1),
dual-attachment(2),
concentrator(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Attachment class. This represents a PORT or
a pair of PORTs plus the associated optional
optical bypass that are managed as a functional
unit. The PORT associations are the following:
single-attachment - S PORTs
dual-attachment - A/B PORT Pairs
concentrator - M PORTs "
REFERENCE
"ANSI { fddiATTACHMENT 11 }"
::= { snmpFddiATTACHMENTEntry 3 }
snmpFddiATTACHMENTOpticalBypassPresent OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this value is false for 'single-
attachment' and { snmpFddiATTACHMENT 11 }.
Correct operation of CMT for single-attachment and
concentrator attachments requires that a bypass
function must not loopback the network side of the
MIC, but only the node side."
REFERENCE
"ANSI { fddiATTACHMENT 12 }"
::= { snmpFddiATTACHMENTEntry 4 }
snmpFddiATTACHMENTIMaxExpiration OBJECT-TYPE
SYNTAX FddiTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"I_Max (refer to ANSI SMT 9.4.4.2.1). It is
recognized that some currently deployed systems do
not implement an optical bypass. Systems which do
not implement optical bypass should return a value
of 0."
REFERENCE
"ANSI { fddiATTACHMENT 13 }"
::= { snmpFddiATTACHMENTEntry 5 }
snmpFddiATTACHMENTInsertedStatus OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2), unimplemented(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the attachment is currently
inserted in the node."
REFERENCE
"ANSI { fddiATTACHMENT 14 }"
::= { snmpFddiATTACHMENTEntry 6 }
snmpFddiATTACHMENTInsertPolicy OBJECT-TYPE
SYNTAX INTEGER { true(1), false(2), unimplemented(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the Insert Policy for this Attachment.
Insert: True (1), Don't Insert: False (2),
Unimplemented (3)"
REFERENCE
"ANSI { fddiATTACHMENT 15 }"
::= { snmpFddiATTACHMENTEntry 7 }
-- the Chip Set group
-- The following object identifiers are allocated for use
-- with the snmpFddiMACChipSet and snmpFddiPORTChipSet
-- variables.
snmpFddiPHYChipSets -- Chips primarily responsible
-- for implementing the PHY
-- function.
OBJECT IDENTIFIER ::= { snmpFddiChipSets 1 }
-- None defined at present
-- Chipsets may someday be
-- defined here
snmpFddiMACChipSets -- Chips primarily responsible
-- for implementing the
-- MAC function.
OBJECT IDENTIFIER ::= { snmpFddiChipSets 2 }
-- None defined at present
-- Chipsets may someday be
-- defined here
snmpFddiPHYMACChipSets -- Chips which implement both
-- the PHY and MAC functions
OBJECT IDENTIFIER ::= { snmpFddiChipSets 3 }
-- None defined at present
-- Chipsets may someday be
-- defined here
END
Acknowledgements
This document was produced by the IETF FDDI MIB working group:
Steve Adams, Digital Equipment Corporation
Hossein Alaee, 3Com Corporation
Haggar Alsaleh, Bell Northern Research
William Anderson, Mitre Corporation
Alan Apt, Addison-Wesley
Mary Artibee, Silicon Graphics
Karen Auerbach, Epilogue Technologies
Doug Bagnall, Apollo/Hewlett Packard
Chet Birger, Coral Network Corporation
Pablo Brenner, Sparta
Howard Brown, Cabletron
Jack Brown, US Army Computer Engineering Center
Eric Brunner
Jeff Case, The University of Tennessee
Tammy Chan, Fibercom
Asheem Chandna, AT&T
Cho Y. Chang, Apollo/Hewlett Packard
Chris Chiotasso, Fibronics
Paul Ciarfella, Digital Equipment Corporation
John Cook, Chipcom
Don Coolidge, Silicon Graphics
Burt Cyr, Unisys
James R. Davin, Massachusetts Institute of Technology
Nabil Damouny
Nadya El-Afandi, Network Systems Corporation
Hunaid Engineer, Cray Research
Jeff Fitzgerald, Fibercom
Richard Fox, Synoptics
Stan Froyd, ACC
Debbie Futcher, U.S. Naval Surface Warfare Center
Joseph Golio, Cray Research
Jeremy Greene, Coral
Brian D. Handspicker, Digital Equipment Corporation
Peter Hayden, Digital Equipment Corporation
Scott Hiles, U.S. Naval Surface Warfare Center
Greg Jones, Data General
Satish Joshi, SynOptics Communications
Jayant Kadambi, AT&T Bell Labs
Joanna Karwowska, Data General
Frank Kastenholz, Interlan
Jim Kinder, Fibercom
Christopher Kolb, PSI
Cheryl Krupczak, NCR
Peter Lin, Vitalink
Then Liu
John R. LoVerso, Concurrent Computer Corporation
Ron Mackey
Gary Malkin, Proteon
Bruce McClure, Synernetics
Keith McCloghrie, Hughes Lan Systems
Donna McMaster, SynOptics
John O'Hara, Massachusetts Institute of Technology
Dave Perkins, SynOptics Communications
James E. Reeves, SynOptics Communications
Jim Reinstedler, Ungermann-Bass
Radhi Renous, Fibronics
Anil Rijsinghani, Digital Equipment Corporation
Bob Rolla, Synernetics
Nelson Ronkin, Synernetics
Marshall T. Rose, Performance Systems International, Inc.
Milt Roselinsky, CMC
Jon Saperia, Digital Equipment Corporation
Greg Satz, cisco Systems
Steven Senum, Network Systems Corporation
Jim Sheridan, IBM Corporation
Jeffrey Schiller, MIT
Dror Shindelman, Sparta
Mark Sleeper, Sparta
Craig Smelser, Digital Equipment Corporation
Lou Steinberg, IBM Corporation
Mary Jane Strohl, Apollo/Hewlett Packard
Sally Tarquinio, Mitre Corporation
Kaj Tesink, Bellcore
Ian Thomas, Chipcom
Dean Throop, Data General
Bill Townsend, Xylogics
Ahmet H. Tuncay, SynOptics Communications
Mike Turico, Motorola
Chris VandenBerg, ACC
Sudhanshu Verma, Hewlett Packard
Joe Vermeulen, UNISYS
David Waiteman, BBN
Bert Williams, Synernetics
Mark Wood, AT&T Computer Systems
Y. C. Yang
Denis Yaro, Sun Microsystems
Jeff Young, Cray Research
The editor gratefully acknowledges the contributions of the editor of the ANSI X3T9.5 SMT document, Mary Jane Strohl of Hewlett Packard/Apollo, whose provision of that document in machine readable form saved much typing and avoided many data entry errors.
The author gratefully acknowledges the labors of Dr. Marshall T. Rose in assisting with converting this document to the new concise MIB format.
References
[1] Rose M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", RFC 1155, Performance Systems International, Hughes LAN Systems, May 1990.
[2] McCloghrie K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets", RFC 1156, Hughes LAN Systems, Performance Systems International, May 1990.
[3] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Network Management Protocol", RFC 1157, SNMP Research, Performance Systems International, Performance Systems International, MIT Laboratory for Computer Science, May 1990.
[4] McCloghrie K., and M. Rose, Editors, "Management Information Base
for Network Management of TCP/IP-based internets", RFC 1213, Performance Systems International, March 1991.
[5] Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1), International Organization for Standardization, International Standard 8824, December 1987.
[6] Information processing systems - Open Systems Interconnection -
Specification of Basic Encoding Rules for Abstract Notation One (ASN.1), International Organization for Standardization, International Standard 8825, December 1987.
[7] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
RFC 1212, Performance Systems International, Hughes LAN Systems, March 1991.
[8] American National Standards Institute, "FDDI Station Management
(SMT)", Preliminary Draft Proposed American National Standard,
American National Standards Institute, X3T9/90-X3T9.5/84-49 REV 6.2, May 18, 1990.
Security Considerations
Security issues are not discussed in this memo.
Author's Address
Jeffrey D. Case SNMP Research, Incorporated 3001 Kimberlin Heights Road Knoxville, Tennessee 37920
Phone: (615) 573-1434
EMail: [email protected]
