RFC1697
From RFC-Wiki
Network Working Group D. Brower, Editor Request for Comments: 1697 The ASK Group, INGRES DBMS Development Category: Standards Track B. Purvy, RDBMSMIB Working Group Chair
Oracle Corporation
A. Daniel
Informix Software, Inc.
M. Sinykin
J. Smith
Oracle Corporation
August 1994
Relational Database Management System (RDBMS)
Management Information Base (MIB) using SMIv2
Status of this Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Contents
Introduction
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing relational database (RDBMS) implementations.
The SNMPv2 Network Management Framework
The SNMPv2 Network Management Framework consists of four major components. They are:
o RFC 1442 [1] which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management.
o STD 17, RFC 1213 [2] defines MIB-II, the core set of managed objects for the Internet suite of protocols.
o RFC 1445 [3] which defines the administrative and other architectural aspects of the framework.
o RFC 1448 [4] which defines the protocol used for network access to managed objects.
o RFC 1443 [5] which describes textual conventions for the framework.
The framework permits new objects to be defined for the purpose of experimentation and evaluation. In particular, the RDBMS-MIB can be seen as an extension of
o RFC 1565 [6] which defines the MIB for monitoring network service applications.
Object Definitions
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to refer to the object type.
Overview
The RDBMS-MIB contains objects that may be used to manage relational database implementations. Specifically, it contains information on installed databases, servers, and on the relation of databases and servers. The terms used in this database are described below.
Terminology
Vendors and Products
are providers of database systems on a host. These vendors
may have more than one database product that is manageable
through this MIB. On a host, there may be systems from
multiple vendors, multiple systems from a single vendor, or
any other combination. There may be a private MIB for each
vendor, and this may be located using the PrivateMibOID
objects in some of the tables.
Databases
are collections of interrelated data organized according to a
schema to serve one or more applications. A database is, for
purposes of this MIB, a collection of tables whose
organization is based on the relational model. There may be
one or more databases available in each system on the host
from each product. In the MIB, data about databases is
captured in the rdbmsDbTable and the rdbmsDbInfoTable, each
with one row per database.
Relational Database Management System (RDBMS)
A collection of integrated services which support database
management and together support and control the creation, use
and maintenance of relational databases. Servers as defined
in this MIB provide the functions of the RDBMS.
Servers
are entities that provide access to databases. For this MIB,
servers are defined to be entities that may exist
independently of other servers. A server may or may not be a
single process, based on its independence from other
processes. In this MIB, information about servers is
captured in the rdbmsSvrTable, the rdbmsSvrInfoTable, each
with one row per server extending the applTable from the
APPLICATION-MIB of RFC 1565. The rdbmsSvrTable and
rdbmsSvrInfoTable are both indexed by the applIndex of that
MIB.
Associations
Inbound associations are local or remote conversations,
usually instances of the SQL CONNECT statement, as made
visible in servers. The MIB does not currently reveal
individual associations; there are association counters in
the dbmsSvrInfoTable and the applTable.
There are also relationships between servers and databases. All obvious relationships are possible and supported:
o 1 database : 1 server
o 1 database : many servers
o many databases : 1 server
o many databases : many servers
Structure and Features
The information in this MIB module is organized into nine tables, twelve potentially writable objects, and two traps, as follows.
Tables
o databases installed on a host/system (rdbmsDbTable)
o actively opened databases (rdbmsDbInfoTable)
o database configuration parameters (rdbmsDbParamTable)
o database limited resources (rdbmsDbLimitedResourceTable)
o database servers installed on a system (rdbmsSrvTable)
o active database servers (rdbmsSrvInfoTable)
o configuration parameters for a server (rdbmsSrvParamTable)
o server limited resources (rdbmsSrvLimitedResourceTable)
o relation of servers and databases on a host (rdbmsRelTable)
These entities have broad applicability among database systems, and are enough for many monitoring tasks. They are far from adequate for detailed management or performance monitoring of specific database products. This gap is expected to be filled with vendor and product specific MIBs addressing the entities that have not been codified here.
Writable objects
The MIB requires no writable objects for conformance. There is no expectation that RDBMS systems may be actively managed through this MIB. However, the RDBMS-MIB supports the capability to modify the following objects if the implementor so chooses.
o rdbmsDbContact
o rdbmsDbInfoSizeAllocated
o rdbmsDbParamCurrValue
o rdbmsDbParamComment rdbmsDbLimitedResourceLimit
o rdbmsDbLimitedResourceDescription
o rdbmsSrvContact
o rdbmsSrvInfoMaxInboundAssociations
o rdbmsSrvParamCurrValue
o rdbmsSrvParamComment
o rdbmsSrvLimitedResourceLimit
o rdbmsSrvLimitedResourceDescription
Traps
The RDBMS-MIB contains two traps:
o rdbmsStateChange
o rdbmsOutOfSpace
Definitions
RDBMS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Gauge32, Integer32
FROM SNMPv2-SMI
DisplayString, DateAndTime, AutonomousType
FROM SNMPv2-TC
applIndex, applGroup
FROM APPLICATION-MIB
mib-2
FROM RFC1213-MIB;
rdbmsMIB MODULE-IDENTITY
LAST-UPDATED "9406150655Z"
ORGANIZATION "IETF RDBMSMIB Working Group"
CONTACT-INFO
" David Brower
Postal: The ASK Group, INGRES DBMS Development
1080 Marina Village Parkway
Alameda, CA 94501
US
Tel: +1 510 748 3418
Fax: +1 510 748 2770
E-mail: [email protected]" DESCRIPTION "The MIB module to describe objects for generic relational databases."
::= { mib-2 39 }
rdbmsObjects OBJECT IDENTIFIER ::= { rdbmsMIB 1 }
----------------------------------------------------------------
rdbmsDbTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of databases installed on a system."
::= { rdbmsObjects 1 }
rdbmsDbEntry OBJECT-TYPE
SYNTAX RdbmsDbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a single database on the host. Whether a
particular database is represented by a row in rdbmsDbTable
may be dependent on the activity level of that database,
according to the product's implementation. An instance of
rdbmsRelState having the value active, other, or restricted
implies that an entry, corresponding to that instance, will
be present."
INDEX { rdbmsDbIndex }
::= { rdbmsDbTable 1 }
RdbmsDbEntry ::=
SEQUENCE {
rdbmsDbIndex INTEGER,
rdbmsDbPrivateMibOID OBJECT IDENTIFIER,
rdbmsDbVendorName DisplayString,
rdbmsDbName DisplayString,
rdbmsDbContact DisplayString
}
rdbmsDbIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A numeric index, unique among all the databases from all
products on this host. This value is a surrogate for the
conceptually unique key, which is {PrivateMibOID,
databasename}"
::= { rdbmsDbEntry 1 }
rdbmsDbPrivateMibOID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authoritative identification for the private MIB for
this database, presumably based on the vendor, e.g., {
enterprises 111 <optional subidentifiers>} for Oracle
databases, {enterprises 757 <optional subidentifiers>} for
Ingres databases, { enterprises 897 <optional
subidentifiers>} for Sybase databases, etc.
If no OBJECT IDENTIFIER exists for the private MIB, attempts
to access this object will return noSuchName (SNMPv1)
or noSuchInstance (SNMPv2)."
::= { rdbmsDbEntry 2 }
rdbmsDbVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the vendor whose RDBMS manages this database,
for informational purposes."
::= { rdbmsDbEntry 3 }
rdbmsDbName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of this database, in a product specific format. The
product may need to qualify the name in some way to resolve
conflicts if it is possible for a database name to be
duplicated on a host. It might be necessary to construct a
hierarchical name embedding the RDBMS instance/installation
on the host, and/or the owner of the database. For instance,
'/test-installation/database-owner/database-name'."
::= { rdbmsDbEntry 4 }
rdbmsDbContact OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The textual identification of the contact person for this
managed database, together with information on how to contact
this person.
Note: if there is no server associated with this database, an
agent may need to keep this in other persistent storage,
e.g., a configuration file.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsDbEntry 5 }
----------------------------------------------------------------
rdbmsDbInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsDbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of additional information about databases present
on the host."
::= { rdbmsObjects 2 }
rdbmsDbInfoEntry OBJECT-TYPE
SYNTAX RdbmsDbInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information that must be present if the database is actively
opened. If the database is not actively opened, then
attempts to access corresponding instances in this table may
result in either noSuchName (SNMPv1) or noSuchInstance
(SNMPv2). 'Actively opened' means at least one of the
rdbmsRelState entries for this database in the rdbmsRelTable
is active(2)."
INDEX { rdbmsDbIndex }
::= { rdbmsDbInfoTable 1 }
RdbmsDbInfoEntry ::=
SEQUENCE {
rdbmsDbInfoProductName DisplayString,
rdbmsDbInfoVersion DisplayString,
rdbmsDbInfoSizeUnits INTEGER,
rdbmsDbInfoSizeAllocated INTEGER,
rdbmsDbInfoSizeUsed INTEGER,
rdbmsDbInfoLastBackup DateAndTime
}
rdbmsDbInfoProductName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual product name of the server that created or last
restructured this database. The format is product specific."
::= { rdbmsDbInfoEntry 1 }
rdbmsDbInfoVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of the server that created or last
restructured this database. The format is product specific."
::= { rdbmsDbInfoEntry 2 }
rdbmsDbInfoSizeUnits OBJECT-TYPE
SYNTAX INTEGER {
bytes(1),
kbytes(2),
mbytes(3),
gbytes(4),
tbytes(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identification of the units used to measure the size of this
database in rdbmsDbInfoSizeAllocated and rdbmsDbInfoSizeUsed.
bytes(1) indicates individual bytes, kbytes(2) indicates
units of kilobytes, mbytes(3) indicates units of megabytes,
gbytes(4) indicates units of gigabytes, and tbytes(5)
indicates units of terabytes. All are binary multiples -- 1K
= 1024. If writable, changes here are reflected in the get
values of the associated objects."
::= { rdbmsDbInfoEntry 3 }
rdbmsDbInfoSizeAllocated OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The estimated size of this database (in
rdbmsDbInfoSizeUnits), which is the disk space that has been
allocated to it and is no longer available to users on this
host. rdbmsDbInfoSize does not necessarily indicate the
amount of space actually in use for database data. Some
databases may support extending allocated size, and others
may not.
Note that a compliant agent does not need to
allow write access to this object."
-- Note: computing SizeAllocated may be expensive, and SNMP -- agents might cache the value to increase performance.
::= { rdbmsDbInfoEntry 4 }
rdbmsDbInfoSizeUsed OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated size of this database, in rdbmsDbInfoSizeUnits,
which is actually in use for database data."
-- Note: computing SizeUsed may be expensive, and SNMP
-- agents might cache the value to increase performance.
::= { rdbmsDbInfoEntry 5 }
rdbmsDbInfoLastBackup OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time that the latest complete or partial backup
of the database was taken. If a database has never been
backed up, then attempts to access this object will
result in either noSuchName (SNMPv1) or noSuchInstance
(SNMPv2)."
::= { rdbmsDbInfoEntry 6 }
----------------------------------------------------------------
rdbmsDbParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsDbParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of configuration parameters for a database.
Entries should be populated according to the following
guidelines:
(1) The value should be specified through administrative
(human) intervention.
(2) It should be configured on a per-database basis.
(3) One of the following is true:
(a) The parameter has a non-numeric value;
(b) The current value is numeric, but it only changes due
to human intervention;
(c) The current value is numeric and dynamic, but the
RDBMS does not track access/allocation failures
related to the parameter;
(d) The current value is numeric and dynamic, the
RDBMS tracks changes in access/allocation failures
related to the parameter, but the failure has no
significant impact on RDBMS performance or
availability.
(e) The current value is numeric and dynamic, the
RDBMS tracks changes in access/allocation failures
related to the parameter, the failure has
significant impact on RDBMS performance or
availability, and is shown in the
rdbmsDbLimitedResource table."
::= { rdbmsObjects 3 }
rdbmsDbParamEntry OBJECT-TYPE
SYNTAX RdbmsDbParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a single configuration parameter for a database.
Parameters with single values have a subindex value of one.
If the parameter is naturally considered to contain a
variable number of members of a class, e.g. members of the
DBA user group, or files which are part of the database, then
it must be presented as a set of rows. If, on the other
hand, the parameter represents a set of choices from a class,
e.g. the permissions on a file or the options chosen out of
the set of all options allowed, AND is guaranteed to always
fit in the 255 character length of a DisplayString, then it
may be presented as a comma separated list with a subindex
value of one. Zero may not be used as a subindex value.
If the database is not actively opened, then attempts
to access corresponding instances in this table may result in
either noSuchName (SNMPv1) or noSuchInstance (SNMPv2).
'Actively opened' means at least one of the
rdbmsRelState entries for this database in the rdbmsRelTable
is active(2)."
INDEX { rdbmsDbIndex, rdbmsDbParamName, rdbmsDbParamSubIndex }
::= { rdbmsDbParamTable 1 }
RdbmsDbParamEntry ::=
SEQUENCE {
rdbmsDbParamName DisplayString,
rdbmsDbParamSubIndex INTEGER,
rdbmsDbParamID AutonomousType,
rdbmsDbParamCurrValue DisplayString,
rdbmsDbParamComment DisplayString
}
rdbmsDbParamName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a configuration parameter for a database. This
name is product-specific. The length is limited to 64
characters to constrain the number of sub-identifiers needed
for instance identification (and to minimize network
traffic)."
::= { rdbmsDbParamEntry 1 }
rdbmsDbParamSubIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subindex value for this parameter. If the parameter is
naturally considered to contain a variable number of members
of a class, e.g. members of the DBA user group, or files
which are part of the database, then it must be presented as
a set of rows. If, on the other hand, the parameter
represents a set of choices from a class, e.g. the
permissions on a file or the options chosen out of the set of
all options allowed, AND is guaranteed to always fit in the
255 character length of a DisplayString, then it may be
presented as a comma separated list with a subindex value of
one. Zero may not be used as a value."
::= { rdbmsDbParamEntry 2 }
rdbmsDbParamID OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the parameter which may be described in some other
MIB (e.g., an enterprise-specific MIB module). If there is
no ID for this rdbmsDbParamName, attempts to access this
object will return noSuchName (SNMPv1) or noSuchInstance
(SNMPv2)."
::= { rdbmsDbParamEntry 3 }
rdbmsDbParamCurrValue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value for a configuration parameter now in effect, the
actual setting for the database. While there may multiple
values in the temporal domain of interest (for instance, the
value to take effect at the next restart), this is the
current setting.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsDbParamEntry 4 }
rdbmsDbParamComment OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Annotation which describes the purpose of a configuration
parameter or the reason for a particular parameter's
setting.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsDbParamEntry 5 }
----------------------------------------------------------------
rdbmsDbLimitedResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsDbLimitedResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of limited resources that are kept per-database."
::= { rdbmsObjects 4 }
rdbmsDbLimitedResourceEntry OBJECT-TYPE
SYNTAX RdbmsDbLimitedResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a single limited resource kept per-database.
A limited resource has maximum use determined by a parameter
that might or might not be changeable at run time, or visible
in the rdbmsDbParamTable. Examples would be the number of
available locks, or disk space on a partition. Arrays of
resources are supported through an integer sub index, which
should have the value of one for single-instance names.
Limited resources that are shared across databases, are best
put in the rdbmsSvrLimitedResourceTable instead of this one.
If the database is not actively opened, then attempts to
access corresponding instances in this table may result in
either noSuchName (SNMPv1) or noSuchInstance (SNMPv2).
'Actively opened' means at least one of the rdbmsRelState
entries for this database in the rdbmsRelTable is active(2)."
INDEX { rdbmsDbIndex, rdbmsDbLimitedResourceName }
::= { rdbmsDbLimitedResourceTable 1 }
RdbmsDbLimitedResourceEntry ::=
SEQUENCE {
rdbmsDbLimitedResourceName DisplayString,
rdbmsDbLimitedResourceID AutonomousType,
rdbmsDbLimitedResourceLimit INTEGER,
rdbmsDbLimitedResourceCurrent INTEGER,
rdbmsDbLimitedResourceHighwater INTEGER,
rdbmsDbLimitedResourceFailures Counter32,
rdbmsDbLimitedResourceDescription DisplayString
}
rdbmsDbLimitedResourceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the resource, for instance 'global locks' or
'locks for the FOO database', or 'data space on /dev/rdsk/5s0
for FOO'. The length is limited to 64 characters to constrain
the number of sub-identifiers needed for instance
identification (and to minimize network traffic)."
::= { rdbmsDbLimitedResourceEntry 1 }
rdbmsDbLimitedResourceID OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the resource which may be described in some other
MIB (e.g., an enterprise-specific MIB module). If there is
no ID for this rdbmsDbLimitedResourceName, attempts to access
this object will return noSuchName (SNMPv1) or noSuchInstance
(SNMPv2)."
::= { rdbmsDbLimitedResourceEntry 2 }
rdbmsDbLimitedResourceLimit OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-write STATUS current
DESCRIPTION
"The maximum value the resource use may attain.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsDbLimitedResourceEntry 3 }
rdbmsDbLimitedResourceCurrent OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value for the resource."
::= { rdbmsDbLimitedResourceEntry 4 }
rdbmsDbLimitedResourceHighwater OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the resource seen since applUpTime
was reset for the earliest server which has the database
actively opened.
If there are two servers with the database open, and the
oldest one dies, the proper way to invalidate the value is by
resetting sysUpTime."
::= { rdbmsDbLimitedResourceEntry 5 }
rdbmsDbLimitedResourceFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the system wanted to exceed the limit of
the resource since applUpTime was reset for the earliest
server which has the database actively opened.
If there are two servers with the DB open, and the
oldest one dies, the proper way to invalidate the value is by
resetting sysUpTime."
::= { rdbmsDbLimitedResourceEntry 6 }
rdbmsDbLimitedResourceDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current
DESCRIPTION
"A description of the resource and the meaning of the integer
units used for Limit, Current, and Highwater.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsDbLimitedResourceEntry 7 }
----------------------------------------------------------------
rdbmsSrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsSrvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of database servers running or installed
on a system."
::= { rdbmsObjects 5 }
rdbmsSrvEntry OBJECT-TYPE
SYNTAX RdbmsSrvEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a single database server. A server is an
independent entity that provides access to one or more
databases. Failure of one does not affect access to
databases through any other servers. There might be one or
more servers providing access to a database. A server may be
a 'process' or collection of 'processes', as interpreted by
the product."
INDEX { applIndex }
::= { rdbmsSrvTable 1 }
RdbmsSrvEntry ::=
SEQUENCE {
rdbmsSrvPrivateMibOID OBJECT IDENTIFIER,
rdbmsSrvVendorName DisplayString,
rdbmsSrvProductName DisplayString,
rdbmsSrvContact DisplayString
}
rdbmsSrvPrivateMibOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION
"The authoritative identification for the private MIB for this
server, presumably based on the vendor, e.g., { enterprises
111 <optional subidentifiers>} for Oracle servers, {
enterprises 757 <optional subidentifiers>} for Ingres
servers, { enterprises 897 <optional subidentifiers>} for
Sybase servers, etc.
If no OBJECT IDENTIFIER exists for the private MIB, attempts
to access this object will return noSuchName (SNMPv1)
or noSuchInstance (SNMPv2)."
::= { rdbmsSrvEntry 1 }
rdbmsSrvVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the vendor whose RDBMS manages this database,
for informational purposes."
::= { rdbmsSrvEntry 2 }
rdbmsSrvProductName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product name of this server. This is normally the
vendor's formal name for the product, in product specific
format."
::= { rdbmsSrvEntry 3 }
rdbmsSrvContact OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The textual identification of the contact person for this
managed server, together with information on how to contact
this person.
Note: if there is no active server associated with this
object, an agent may need to keep this in other persistent
storage, e.g., a configuration file.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsSrvEntry 4 }
----------------------------------------------------------------
rdbmsSrvInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsSrvInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of additional information about database servers.
Entries in this table correspond to applications in the
APPLICATION-MIB applTable. Some objects in that table are
application-specific. When they are associated with an RDBMS
server in this table, the objects have the following
meanings.
applName - The name of this server, i.e., the process or
group of processes providing access to this database. The
exact format will be product and host specific.
applVersion - The version number of this server, in product
specific format.
applOperStatus - up(1) means operational and available for
general use. down(2) means the server is not available for
use, but is known to the agent. The other states have broad
meaning, and may need to be supplemented by the vendor
private MIB. Halted(3) implies an administrative state of
unavailability. Congested(4) implies a resource or or
administrative limit is prohibiting new inbound associations.
The 'available soon' description of restarting(5) may include
an indeterminate amount of recovery.
applLastChange is the time the agent noticed the most recent
change to applOperStatus.
applInboundAssociation is the number of currently active
local and remote conversations (usually SQL connects).
applOutboundAssociations is not provided by this MIB.
applAccumulatedInboundAssociations is the total number of
local and remote conversations started since the server came
up.
applAccumulatedOutbound associations is not provided by this
MIB.
applLastInboundActivity is the time the most recent local or
remote conversation was attempted or disconnected.
applLastOutboundActivity is not provided by this MIB.
applRejectedInboundAssociations is the number of local or
remote conversations rejected by the server for
administrative reasons or because of resource limitations.
applFailedOutboundAssociations is not provided by this MIB."
::= { rdbmsObjects 6 }
rdbmsSrvInfoEntry OBJECT-TYPE
SYNTAX RdbmsSrvInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information that must be present for a single 'up' database
server, with visibility determined by the value of the
corresponding applOperStatus object. If an instance of
applOperStatus is not up(1), then attempts to access
corresponding instances in this table may result in either
noSuchName (SNMPv1) or noSuchInstance (SNMPv2) being returned
by the agent."
INDEX { applIndex }
::= { rdbmsSrvInfoTable 1 }
RdbmsSrvInfoEntry ::=
SEQUENCE {
rdbmsSrvInfoStartupTime DateAndTime,
rdbmsSrvInfoFinishedTransactions Gauge32,
rdbmsSrvInfoDiskReads Counter32,
rdbmsSrvInfoDiskWrites Counter32,
rdbmsSrvInfoLogicalReads Counter32,
rdbmsSrvInfoLogicalWrites Counter32,
rdbmsSrvInfoPageWrites Counter32,
rdbmsSrvInfoPageReads Counter32,
rdbmsSrvInfoDiskOutOfSpaces Counter32,
rdbmsSrvInfoHandledRequests Counter32,
rdbmsSrvInfoRequestRecvs Counter32,
rdbmsSrvInfoRequestSends Counter32,
rdbmsSrvInfoHighwaterInboundAssociations Gauge32,
rdbmsSrvInfoMaxInboundAssociations Gauge32
}
rdbmsSrvInfoStartupTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time at which this server was last started."
::= { rdbmsSrvInfoEntry 1 }
rdbmsSrvInfoFinishedTransactions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transactions visible to this server that have
been completed by either commit or abort. Some database
operations, such as read-only queries, may not result in the
creation of a transaction."
::= { rdbmsSrvInfoEntry 2 }
rdbmsSrvInfoDiskReads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of reads of database files issued to the
operating system by this server since startup. Numbers are
not comparable between products. What constitutes a
readand how it is accounted is product-specific."
::= { rdbmsSrvInfoEntry 3 }
rdbmsSrvInfoLogicalReads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of logical reads of database files made
internally by this server since startup. The values of this
object and those of rdbmsSrvInfoDiskReads reveal the effect
of caching on read operation. Numbers are not comparable
between products, and may only be meaningful when aggregated
across all servers sharing a common cache."
::= { rdbmsSrvInfoEntry 4 }
rdbmsSrvInfoDiskWrites OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of writes to database files issued to the
operating system by this server since startup. Numbers are
not comparable between products."
::= { rdbmsSrvInfoEntry 5 }
rdbmsSrvInfoLogicalWrites OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times parts of the database files have
been marked 'dirty' and in need of writing to the disk. This
value and rdbmsSrvInfoDiskWrites give some indication of the
effect of 'write-behind' strategies in reducing the number of
disk writes compared to database operations. Because the
writes may be done by servers other than those marking the
parts of the database files dirty, these values may only be
meaningful when aggregated across all servers sharing a
common cache. Numbers are not comparable between products."
::= { rdbmsSrvInfoEntry 6 }
rdbmsSrvInfoPageReads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of pages in database files read by this
server since startup. 'Pages' are product specific units of
disk i/o operations. This value, along with
rdbmsSrvInfoDiskReads, reveals the effect of any grouping
read-ahead that may be used to enhance performance of some
queries, such as scans."
::= { rdbmsSrvInfoEntry 7}
rdbmsSrvInfoPageWrites OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of pages in database files written by this
server since startup. Pages are product-specific units of
disk I/O. This value, with rdbmsSrvInfoDiskWrites, shows the
effect of write strategies that collapse logical writes of
contiguous pages into single calls to the operating system."
::= { rdbmsSrvInfoEntry 8 }
rdbmsSrvInfoDiskOutOfSpaces OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The total number of times the server has been unable to
obtain disk space that it wanted, since server startup. This
would be inspected by an agent on receipt of an
rdbmsOutOfSpace trap."
::= { rdbmsSrvInfoEntry 9 }
rdbmsSrvInfoHandledRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of requests made to the server on inbound
associations. The meaning of 'requests' is product specific,
and is not comparable between products.
This is intended to encapsulate high level semantic
operations between clients and servers, or between peers.
For instance, one request might correspond to a 'select' or
an 'insert' statement. It is not intended to capture disk
i/o described in rdbmsSrvInfoDiskReads and
rdbmsSrvInfoDiskWrites."
::= { rdbmsSrvInfoEntry 10 }
rdbmsSrvInfoRequestRecvs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of receive operations made processing any requests
on inbound associations. The meaning of operations is product
specific, and is not comparable between products.
This is intended to capture lower-level i/o operations than
shown by HandledRequests, between clients and servers, or
between peers. For instance, it might roughly correspond to
the amount of data given with an 'insert' statement. It is
not intended to capture disk i/o described in
rdbmsSrvInfoDiskReads and rdbmsSrvInfoDiskWrites."
::= { rdbmsSrvInfoEntry 11 }
rdbmsSrvInfoRequestSends OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of send operations made processing requests
handled on inbound associations. The meaning of operations
is product specific, and is not comparable between products.
This is intended to capture lower-level i/o operations than
shown by HandledRequests, between between clients and
servers, or between peers. It might roughly correspond to
the number of rows returned by a 'select' statement. It is
not intended to capture disk i/o described in DiskReads."
::= { rdbmsSrvInfoEntry 12 }
rdbmsSrvInfoHighwaterInboundAssociations OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The greatest number of inbound associations that have been
simultaneously open to this server since startup."
::= { rdbmsSrvInfoEntry 13 }
rdbmsSrvInfoMaxInboundAssociations OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The greatest number of inbound associations that can be
simultaneously open with this server. If there is no limit,
then the value should be zero.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsSrvInfoEntry 14 }
----------------------------------------------------------------
rdbmsSrvParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsSrvParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of configuration parameters for a server. Entries
should be populated according to the following guidelines:
(1) The value should be specified through administrative
(human) intervention.
(2) It should be configured on a per-server or a more global
basis, with duplicate entries for each server sharing
use of the parameter.
(3) One of the following is true:
(a) The parameter has a non-numeric value;
(b) The current value is numeric, but it only changes due
to human intervention;
(c) The current value is numeric and dynamic, but the
RDBMS does not track access/allocation failures
related to the parameter;
(d) The current value is numeric and dynamic, the
RDBMS tracks changes in access/allocation failures
related to the parameter, but the failure has no
significant impact on RDBMS performance or
availability.
(e) The current value is numeric and dynamic, the
RDBMS tracks changes in access/allocation failures
related to the parameter, the failure has
significant impact on RDBMS performance or
availability, and is shown in the
rdbmsSrvLimitedResource table."
::= { rdbmsObjects 7 }
rdbmsSrvParamEntry OBJECT-TYPE
SYNTAX RdbmsSrvParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a single configuration parameter for a server.
Parameters with single values have a subindex value of one.
If the parameter is naturally considered to contain a
variable number of members of a class, e.g. members of the
DBA user group, or tracepoints active in the server, then it
must be presented as a set of rows. If, on the other hand,
the parameter represents a set of choices from a class,
e.g. the permissions on a file or the options chosen out of
the set of all options allowed, AND is guaranteed to always
fit in the 255 character length of a DisplayString, then it
may be presented as a comma separated list with a subindex
value of one. Zero may not be used as a subindex value.
Entries for a server must be present if the value of the
corresponding applOperStatus object is up(1). If an instance
of applOperStatus is not up(1), then attempts to access
corresponding instances in this table may result in either
noSuchName (SNMPv1) or noSuchInstance (SNMPv2) being returned
by the agent."
INDEX { applIndex, rdbmsSrvParamName, rdbmsSrvParamSubIndex }
::= { rdbmsSrvParamTable 1 }
RdbmsSrvParamEntry ::=
SEQUENCE {
rdbmsSrvParamName DisplayString,
rdbmsSrvParamSubIndex INTEGER,
rdbmsSrvParamID AutonomousType,
rdbmsSrvParamCurrValue DisplayString,
rdbmsSrvParamComment DisplayString
}
rdbmsSrvParamName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of a configuration parameter for a server. This
name is product-specific. The length is limited to 64
characters to constrain the number of sub-identifiers needed
for instance identification (and to minimize network
traffic)."
::= { rdbmsSrvParamEntry 1 }
rdbmsSrvParamSubIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subindex value for this parameter. If the parameter is
naturally considered to contain a variable number of members
of a class, e.g. members of the DBA user group, or files
which are part of the database, then it must be presented as
a set of rows. If, on the other hand, the parameter
represents a set of choices from a class, e.g. the
permissions on a file or the options chosen out of the set of
all options allowed, AND is guaranteed to always fit in the
255 character length of a DisplayString, then it may be
presented as a comma separated list with a subindex value of
one. Zero may not be used as a value."
::= { rdbmsSrvParamEntry 2 }
rdbmsSrvParamID OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the parameter which may be described in some
other MIB. If there is no ID for this rdbmsSrvParamName,
attempts to access this object will return noSuchName
(SNMPv1) or noSuchInstance (SNMPv2)."
::= { rdbmsSrvParamEntry 3 }
rdbmsSrvParamCurrValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value for a configuration parameter now in effect, the
actual setting for the server. While there may multiple
values in the temporal domain of interest (for instance, the
value to take effect at the next restart), this is the
current setting.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsSrvParamEntry 4 }
rdbmsSrvParamComment OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Annotation which describes the purpose of a configuration
parameter or the reason for a particular parameter's
setting.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsSrvParamEntry 5 }
----------------------------------------------------------------
rdbmsSrvLimitedResourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsSrvLimitedResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of limited resources relevant to a server."
::= { rdbmsObjects 8 }
rdbmsSrvLimitedResourceEntry OBJECT-TYPE
SYNTAX RdbmsSrvLimitedResourceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a single limited resource kept by the server.
A limited resource has maximum use determined by a parameter
that might or might not changeable at run time, or visible in
the rbmsSrvParamTable. Examples would be the number of
available locks, or number of concurrent executions allowed
in a server. Arrays of resources are supported through an
integer subindex, which should have the value of one for
single-instance names.
Limited resources that are shared across servers or databases
are best duplicated in this table across
all servers accessing the resource."
INDEX { applIndex, rdbmsSrvLimitedResourceName }
::= { rdbmsSrvLimitedResourceTable 1 }
RdbmsSrvLimitedResourceEntry ::=
SEQUENCE {
rdbmsSrvLimitedResourceName DisplayString,
rdbmsSrvLimitedResourceID AutonomousType,
rdbmsSrvLimitedResourceLimit INTEGER,
rdbmsSrvLimitedResourceCurrent INTEGER,
rdbmsSrvLimitedResourceHighwater INTEGER,
rdbmsSrvLimitedResourceFailures Counter32,
rdbmsSrvLimitedResourceDescription DisplayString
}
rdbmsSrvLimitedResourceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the resource, for instance 'threads' or
'semaphores', or 'buffer pages'"
::= { rdbmsSrvLimitedResourceEntry 1 }
rdbmsSrvLimitedResourceID OBJECT-TYPE
SYNTAX AutonomousType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the resource which may be described in some other
MIB. If there is no ID for this rdbmsSrvLimitedResourceName,
attempts to access this object will return noSuchName
(SNMPv1) or noSuchInstance (SNMPv2)."
::= { rdbmsSrvLimitedResourceEntry 2 }
rdbmsSrvLimitedResourceLimit OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-write STATUS current
DESCRIPTION
"The maximum value the resource use may attain.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsSrvLimitedResourceEntry 3 }
rdbmsSrvLimitedResourceCurrent OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current value for the resource."
::= { rdbmsSrvLimitedResourceEntry 4 }
rdbmsSrvLimitedResourceHighwater OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum value of the resource seen since applUpTime
was reset."
::= { rdbmsSrvLimitedResourceEntry 5 }
rdbmsSrvLimitedResourceFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the system wanted to exceed the limit of
the resource since applUpTime was reset."
::= { rdbmsSrvLimitedResourceEntry 6 }
rdbmsSrvLimitedResourceDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A description of the resource and the meaning of the integer
units used for Limit, Current, and Highwater.
Note that a compliant agent does not need to
allow write access to this object."
::= { rdbmsSrvLimitedResourceEntry 7 }
----------------------------------------------------------------
rdbmsRelTable OBJECT-TYPE
SYNTAX SEQUENCE OF RdbmsRelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table relating databases and servers present on a host."
::= { rdbmsObjects 9 }
rdbmsRelEntry OBJECT-TYPE
SYNTAX RdbmsRelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry relating a single database server to a single
database to which it may provide access. The table is
indexed first by the index of rdbmsDbTable, and then
rdbmsSrvTable, so that all servers capable of providing
access to a given database may be found by SNMP traversal
operations (get-next and get-bulk). The makeup of this table
depends on the product's architecture, e.g. if it is one
server - many databases, then each server will appear n
times, where n is the number of databases it may access, and
each database will appear once. If the architecture is one
database - many servers, then each server will appear once
and each database will appear n times, where n is the number
of servers that may be accessing it."
INDEX { rdbmsDbIndex, applIndex }
::= { rdbmsRelTable 1 }
RdbmsRelEntry ::=
SEQUENCE {
rdbmsRelState INTEGER,
rdbmsRelActiveTime DateAndTime
}
rdbmsRelState OBJECT-TYPE
SYNTAX INTEGER{
other(1),
active(2),
available(3),
restricted(4),
unavailable(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this server's access to this database.
Active(2) means the server is actively using the database.
Available(3) means the server could use the database if
necessary. Restricted(4) means the database is in some
administratively determined state of less-than-complete
availability. Unavailable(5) means the database is not
available through this server. Other(1) means the
database/server is in some other condition, possibly
described in the vendor private MIB."
::= { rdbmsRelEntry 1 }
rdbmsRelActiveTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the database was made active by the server. If an
instance of rdbmsRelState is not active(1), then attempts to
access the corresponding instance of this object may result
in either noSuchName (SNMPv1) or noSuchInstance (SNMPv2)
being returned by the agent."
::= { rdbmsRelEntry 2 }
----------------------------------------------------------------
-- Well known resources for which limits, high water marks, -- access or allocation failures, and current levels of use -- are possibly available in either the rdbmsDbLimitedResources -- or the rdbmsSrvLimitedResources tables.
rdbmsWellKnownLimitedResources OBJECT IDENTIFIER
::= { rdbmsObjects 10 }
rdbmsLogSpace OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Storage allocated for redo and undo logs."
::= { rdbmsWellKnownLimitedResources 1}
----------------------------------------------------------------
rdbmsTraps OBJECT IDENTIFIER ::= { rdbmsMIB 2 }
rdbmsStateChange NOTIFICATION-TYPE
OBJECTS { rdbmsRelState }
STATUS current
DESCRIPTION
"An rdbmsStateChange trap signifies that one of the database
server/databases managed by this agent has changed its
rdbmsRelState in a way that makes it less accessible for use.
For these purposes, both active(2) and available(3) are
considered fully accessible. The state sent with the trap is
the new, less accessible state."
::= { rdbmsTraps 1 }
rdbmsOutOfSpace NOTIFICATION-TYPE
OBJECTS { rdbmsSrvInfoDiskOutOfSpaces }
STATUS current
DESCRIPTION
"An rdbmsOutOfSpace trap signifies that one of the database
servers managed by this agent has been unable to allocate
space for one of the databases managed by this agent. Care
should be taken to avoid flooding the network with these
traps."
::= { rdbmsTraps 2 }
----------------------------------------------------------------
-- compliance information
rdbmsConformance OBJECT IDENTIFIER ::= { rdbmsMIB 3 }
rdbmsCompliances OBJECT IDENTIFIER ::= { rdbmsConformance 1 }
rdbmsGroups OBJECT IDENTIFIER ::= { rdbmsConformance 2 }
-- compliance statements
rdbmsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which
implement the RDBMS MIB"
MODULE HOST-RESOURCES-MIB
MANDATORY-GROUPS { hrSystem }
MODULE APPLICATION-MIB
MANDATORY-GROUPS { applGroup }
MODULE RDBMS-MIB
MANDATORY-GROUPS { rdbmsGroup }
GROUP rdbmsGroup
DESCRIPTION
"The rdbmsGroup is mandatory, but no write access
to objects is required for compliance."
OBJECT rdbmsDbContact
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsDbParamCurrValue
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsDbParamComment
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsDbLimitedResourceLimit
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsDbLimitedResourceDescription
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsSrvContact
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsSrvInfoMaxInboundAssociations
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsSrvParamCurrValue
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsSrvParamComment
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsSrvLimitedResourceLimit
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
OBJECT rdbmsSrvLimitedResourceDescription
MIN-ACCESS read-only
DESCRIPTION
"A compliant system need not allow write-access to this
object."
::= { rdbmsCompliances 1 }
-- units of conformance
-- rdbmsStateChange and rdbmsOutOfSpace traps are omitted -- intentionally. They are not required or part of any -- conformance group.
rdbmsGroup OBJECT-GROUP
OBJECTS {
rdbmsDbPrivateMibOID, rdbmsDbVendorName,
rdbmsDbName, rdbmsDbContact,
rdbmsDbInfoProductName, rdbmsDbInfoVersion,
rdbmsDbInfoSizeUnits, rdbmsDbInfoSizeAllocated,
rdbmsDbInfoSizeUsed, rdbmsDbInfoLastBackup,
rdbmsDbParamCurrValue, rdbmsDbParamComment,
rdbmsDbLimitedResourceLimit,
rdbmsDbLimitedResourceCurrent,
rdbmsDbLimitedResourceHighwater,
rdbmsDbLimitedResourceFailures,
rdbmsDbLimitedResourceDescription,
rdbmsSrvPrivateMibOID, rdbmsSrvVendorName,
rdbmsSrvProductName, rdbmsSrvContact,
rdbmsSrvInfoStartupTime,
rdbmsSrvInfoFinishedTransactions,
rdbmsSrvInfoDiskReads, rdbmsSrvInfoDiskWrites,
rdbmsSrvInfoLogicalReads, rdbmsSrvInfoLogicalWrites,
rdbmsSrvInfoPageReads, rdbmsSrvInfoPageWrites,
rdbmsSrvInfoHandledRequests,
rdbmsSrvInfoRequestRecvs, rdbmsSrvInfoRequestSends,
rdbmsSrvInfoHighwaterInboundAssociations,
rdbmsSrvInfoMaxInboundAssociations,
rdbmsSrvParamCurrValue, rdbmsSrvParamComment,
rdbmsSrvLimitedResourceLimit,
rdbmsSrvLimitedResourceCurrent,
rdbmsSrvLimitedResourceHighwater,
rdbmsSrvLimitedResourceFailures,
rdbmsSrvLimitedResourceDescription,
rdbmsRelState, rdbmsRelActiveTime }
STATUS current
DESCRIPTION
"A collection of objects providing basic instrumentation of an
RDBMS entity."
::= { rdbmsGroups 1 }
----------------------------------------------------------------
END
Acknowledgements
This document was produced by the IETF RDBMSMIB working group:
Mark Allyn, Boeing Virinder Batra, IBM Jonathan Bauer DEC Janice Befu, Network General Gerard Berthet, Independence Technologies Dave Brower, Ingres Barry Bruins, Network General David Campbell, Digital Equipment Corporation Stephen Campbell, European Database Consulting Jeff Case SNMP Research Dave Crocker Silicon Graphics Tony Daniel, Informix Craig DeNoce, Sybase Howard Dernehl, Ingres/Data General Mike Hartstein, Oracle Vijay Iyer, Independence Technologies Britt Johnston, Progress Bill Kehoe, Sybase Deirdre Kostick, Bellcore Cheryl Krupczak, Empire Technologies Damien Lindauer, Microsoft Ivan Lui, Informix John McCormack, Tandem Computers Inc. David Meldrum, Sybase David Morandi, Red Brick Systems Bob Natale, American Computer Diana Parr, Gupta David Perkins, Synoptics Randy Presuhn, Peer Networks Brian Promes, Novell
Bob Purvy, Oracle Roger Reinsch, IBM Marshall T. Rose, Dover Beach Consulting Jon Saperia, DEC Marc Sinykin, Oracle Jay Smith, Oracle Mike Sorsen, Edward D. Jones & Co. Bob Taylor, Tandem Maria Valls, IBM Bert Wijnen, IBM Stan Wong, IBM
References
[1] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure
of Management Information for version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1442, SNMP Research, Inc., Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon University, April 1993.
[2] McCloghrie, K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets - MIB-II", STD 17, RFC 1213, Hughes LAN Systems, Performance Systems International, March 1991.
[3] Galvin, J., and K. McCloghrie, "Administrative Model for version
2 of the Simple Network Management Protocol (SNMPv2)", RFC 1445, Trusted Information Systems, Hughes LAN Systems, April 1993.
[4] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol
Operations for version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1448, SNMP Research, Inc., Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon University, April 1993.
[5] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Textual
Conventions for version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1443, SNMP Research, Inc., Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon University, April 1993.
[6] Kille, S., WG Chair, and N. Freed, Editor, "The Network Services
Monitoring MIB", RFC 1565, ISODE Consortium, Innosoft, January 1994.
Security Considerations
Security issues are not discussed in this memo.
Authors' Addresses
David Brower The ASK Group, INGRES DBMS Development 1080 Marina Village Parkway Alameda, CA, 94501 US
Phone: +1 510 748 3418 EMail: [email protected]
Bob Purvy Oracle Corporation 500 Oracle Parkway Redwood Shores, CA 94065 US
Phone: +1 415 506 2972 EMail: [email protected]
Anthony Daniel Informix Software, Inc. 921 S.W. Washington Street Portland, OR 97205 US
Phone: +1 503 221 2638 EMail: [email protected]
Marc Sinykin Oracle Corporation 400 Oracle Parkway Redwood Shores, CA 94065 US
Phone: +1 415 506 2477 EMail: [email protected]
Jay Smith Oracle Corporation 400 Oracle Parkway Redwood Shores, CA 94065 US
Phone: +1 415 506 6239 EMail: [email protected]
