RFC2849
Network Working Group G. Good Request for Comments: 2849 iPlanet e-commerce Solutions Category: Standards Track June 2000
The LDAP Data Interchange Format (LDIF) - Technical Specification
Status of this Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2000). All Rights Reserved.
Abstract
This document describes a file format suitable for describing directory information or modifications made to directory information. The file format, known as LDIF, for LDAP Data Interchange Format, is typically used to import and export directory information between LDAP-based directory servers, or to describe a set of changes which are to be applied to a directory.
Background and Intended Usage
There are a number of situations where a common interchange format is desirable. For example, one might wish to export a copy of the contents of a directory server to a file, move that file to a different machine, and import the contents into a second directory server.
Additionally, by using a well-defined interchange format, development of data import tools from legacy systems is facilitated. A fairly simple set of tools written in awk or perl can, for example, convert a database of personnel information into an LDIF file. This file can then be imported into a directory server, regardless of the internal database representation the target directory server uses.
The LDIF format was originally developed and used in the University of Michigan LDAP implementation. The first use of LDIF was in describing directory entries. Later, the format was expanded to allow representation of changes to directory entries.
Relationship to the application/directory MIME content-type:
The application/directory MIME content-type [1] is a general framework and format for conveying directory information, and is independent of any particular directory service. The LDIF format is a simpler format which is perhaps easier to create, and may also be used, as noted, to describe a set of changes to be applied to a directory.
The key words "MUST", "MUST NOT", "MAY", "SHOULD", and "SHOULD NOT" used in this document are to be interpreted as described in [7].
Definition of the LDAP Data Interchange Format
The LDIF format is used to convey directory information, or a description of a set of changes made to directory entries. An LDIF file consists of a series of records separated by line separators. A record consists of a sequence of lines describing a directory entry, or a sequence of lines describing a set of changes to a directory entry. An LDIF file specifies a set of directory entries, or a set of changes to be applied to directory entries, but not both.
There is a one-to-one correlation between LDAP operations that modify the directory (add, delete, modify, and modrdn), and the types of changerecords described below ("add", "delete", "modify", and "modrdn" or "moddn"). This correspondence is intentional, and permits a straightforward translation from LDIF changerecords to protocol operations.
Formal Syntax Definition of LDIF
The following definition uses the augmented Backus-Naur Form specified in RFC 2234 [2].
ldif-file = ldif-content / ldif-changes
ldif-content = version-spec 1*(1*SEP ldif-attrval-record)
ldif-changes = version-spec 1*(1*SEP ldif-change-record)
ldif-attrval-record = dn-spec SEP 1*attrval-spec
ldif-change-record = dn-spec SEP *control changerecord
version-spec = "version:" FILL version-number
version-number = 1*DIGIT
; version-number MUST be "1" for the
; LDIF format described in this document.
dn-spec = "dn:" (FILL distinguishedName /
":" FILL base64-distinguishedName)
distinguishedName = SAFE-STRING
; a distinguished name, as defined in [3]
base64-distinguishedName = BASE64-UTF8-STRING
; a distinguishedName which has been base64
; encoded (see note 10, below)
rdn = SAFE-STRING
; a relative distinguished name, defined as
; <name-component> in [3]
base64-rdn = BASE64-UTF8-STRING
; an rdn which has been base64 encoded (see
; note 10, below)
control = "control:" FILL ldap-oid ; controlType
0*1(1*SPACE ("true" / "false")) ; criticality
0*1(value-spec) ; controlValue
SEP
; (See note 9, below)
ldap-oid = 1*DIGIT 0*1("." 1*DIGIT)
; An LDAPOID, as defined in [4]
attrval-spec = AttributeDescription value-spec SEP
value-spec = ":" ( FILL 0*1(SAFE-STRING) /
":" FILL (BASE64-STRING) /
"<" FILL url)
; See notes 7 and 8, below
url = <a Uniform Resource Locator,
as defined in [6]>
; (See Note 6, below)
AttributeDescription = AttributeType [";" options]
; Definition taken from [4]
AttributeType = ldap-oid / (ALPHA *(attr-type-chars))
options = option / (option ";" options)
option = 1*opt-char
attr-type-chars = ALPHA / DIGIT / "-"
opt-char = attr-type-chars
changerecord = "changetype:" FILL
(change-add / change-delete /
change-modify / change-moddn)
change-add = "add" SEP 1*attrval-spec
change-delete = "delete" SEP
change-moddn = ("modrdn" / "moddn") SEP
"newrdn:" ( FILL rdn /
":" FILL base64-rdn) SEP
"deleteoldrdn:" FILL ("0" / "1") SEP
0*1("newsuperior:"
( FILL distinguishedName /
":" FILL base64-distinguishedName) SEP)
change-modify = "modify" SEP *mod-spec
mod-spec = ("add:" / "delete:" / "replace:")
FILL AttributeDescription SEP
*attrval-spec
"-" SEP
SPACE = %x20
; ASCII SP, space
FILL = *SPACE
SEP = (CR LF / LF)
CR = %x0D
; ASCII CR, carriage return
LF = %x0A
; ASCII LF, line feed
ALPHA = %x41-5A / %x61-7A
; A-Z / a-z
DIGIT = %x30-39
; 0-9
UTF8-1 = %x80-BF
UTF8-2 = %xC0-DF UTF8-1
UTF8-3 = %xE0-EF 2UTF8-1
UTF8-4 = %xF0-F7 3UTF8-1
UTF8-5 = %xF8-FB 4UTF8-1
UTF8-6 = %xFC-FD 5UTF8-1
SAFE-CHAR = %x01-09 / %x0B-0C / %x0E-7F
; any value <= 127 decimal except NUL, LF,
; and CR
SAFE-INIT-CHAR = %x01-09 / %x0B-0C / %x0E-1F /
%x21-39 / %x3B / %x3D-7F
; any value <= 127 except NUL, LF, CR,
; SPACE, colon (":", ASCII 58 decimal)
; and less-than ("<" , ASCII 60 decimal)
SAFE-STRING = [SAFE-INIT-CHAR *SAFE-CHAR]
UTF8-CHAR = SAFE-CHAR / UTF8-2 / UTF8-3 /
UTF8-4 / UTF8-5 / UTF8-6
UTF8-STRING = *UTF8-CHAR
BASE64-UTF8-STRING = BASE64-STRING
; MUST be the base64 encoding of a
; UTF8-STRING
BASE64-CHAR = %x2B / %x2F / %x30-39 / %x3D / %x41-5A /
%x61-7A
; +, /, 0-9, =, A-Z, and a-z
; as specified in [5]
BASE64-STRING = [*(BASE64-CHAR)]
Notes on LDIF Syntax
1) For the LDIF format described in this document, the version
number MUST be "1". If the version number is absent,
implementations MAY choose to interpret the contents as an
older LDIF file format, supported by the University of
Michigan ldap-3.3 implementation [8].
2) Any non-empty line, including comment lines, in an LDIF file
MAY be folded by inserting a line separator (SEP) and a SPACE.
Folding MUST NOT occur before the first character of the line.
In other words, folding a line into two lines, the first of
which is empty, is not permitted. Any line that begins with a
single space MUST be treated as a continuation of the previous
(non-empty) line. When joining folded lines, exactly one space
character at the beginning of each continued line must be
discarded. Implementations SHOULD NOT fold lines in the middle
of a multi-byte UTF-8 character.
3) Any line that begins with a pound-sign ("#", ASCII 35) is a
comment line, and MUST be ignored when parsing an LDIF file.
4) Any dn or rdn that contains characters other than those
defined as "SAFE-UTF8-CHAR", or begins with a character other
than those defined as "SAFE-INIT-UTF8-CHAR", above, MUST be
base-64 encoded. Other values MAY be base-64 encoded. Any
value that contains characters other than those defined as
"SAFE-CHAR", or begins with a character other than those
defined as "SAFE-INIT-CHAR", above, MUST be base-64 encoded.
Other values MAY be base-64 encoded.
5) When a zero-length attribute value is to be included directly
in an LDIF file, it MUST be represented as
AttributeDescription ":" FILL SEP. For example, "seeAlso:"
followed by a newline represents a zero-length "seeAlso"
attribute value. It is also permissible for the value
referred to by a URL to be of zero length.
6) When a URL is specified in an attrval-spec, the following
conventions apply:
a) Implementations SHOULD support the file:// URL format. The
contents of the referenced file are to be included verbatim
in the interpreted output of the LDIF file.
b) Implementations MAY support other URL formats. The
semantics associated with each supported URL will be
documented in an associated Applicability Statement.
7) Distinguished names, relative distinguished names, and
attribute values of DirectoryString syntax MUST be valid UTF-8
strings. Implementations that read LDIF MAY interpret files
in which these entities are stored in some other character set
encoding, but implementations MUST NOT generate LDIF content
which does not contain valid UTF-8 data.
8) Values or distinguished names that end with SPACE SHOULD be
base-64 encoded.
9) When controls are included in an LDIF file, implementations
MAY choose to ignore some or all of them. This may be
necessary if the changes described in the LDIF file are being
sent on an LDAPv2 connection (LDAPv2 does not support
controls), or the particular controls are not supported by the
remote server. If the criticality of a control is "true", then
the implementation MUST either include the control, or MUST
NOT send the operation to a remote server.
10) When an attrval-spec, distinguishedName, or rdn is base64-
encoded, the encoding rules specified in [5] are used with the
following exceptions: a) The requirement that base64 output
streams must be represented as lines of no more than 76
characters is removed. Lines in LDIF files may only be folded
according to the folding rules described in note 2, above. b)
Base64 strings in [5] may contain characters other than those
defined in BASE64-CHAR, and are ignored. LDIF does not permit
any extraneous characters, other than those used for line
folding.
Examples of LDAP Data Interchange Format
Example 1: An simple LDAP file with two entries
version: 1 dn: cn=Barbara Jensen, ou=Product Development, dc=airius, dc=com objectclass: top objectclass: person objectclass: organizationalPerson cn: Barbara Jensen cn: Barbara J Jensen cn: Babs Jensen sn: Jensen uid: bjensen telephonenumber: +1 408 555 1212 description: A big sailing fan.
dn: cn=Bjorn Jensen, ou=Accounting, dc=airius, dc=com objectclass: top objectclass: person objectclass: organizationalPerson cn: Bjorn Jensen sn: Jensen telephonenumber: +1 408 555 1212
Example 2: A file containing an entry with a folded attribute value
version: 1 dn:cn=Barbara Jensen, ou=Product Development, dc=airius, dc=com objectclass:top objectclass:person objectclass:organizationalPerson cn:Barbara Jensen cn:Barbara J Jensen cn:Babs Jensen sn:Jensen uid:bjensen telephonenumber:+1 408 555 1212 description:Babs is a big sailing fan, and travels extensively in sea
rch of perfect sailing conditions.
title:Product Manager, Rod and Reel Division
Example 3: A file containing a base-64-encoded value
version: 1 dn: cn=Gern Jensen, ou=Product Testing, dc=airius, dc=com objectclass: top objectclass: person objectclass: organizationalPerson cn: Gern Jensen cn: Gern O Jensen sn: Jensen uid: gernj telephonenumber: +1 408 555 1212 description:: V2hhdCBhIGNhcmVmdWwgcmVhZGVyIHlvdSBhcmUhICBUaGlzIHZhbHVl IGlzIGJhc2UtNjQtZW5jb2RlZCBiZWNhdXNlIGl0IGhhcyBhIGNvbnRyb2wgY2hhcmFjdG VyIGluIGl0IChhIENSKS4NICBCeSB0aGUgd2F5LCB5b3Ugc2hvdWxkIHJlYWxseSBnZXQg b3V0IG1vcmUu
Example 4: A file containing an entries with UTF-8-encoded attribute values, including language tags. Comments indicate the contents of UTF-8-encoded attributes and distinguished names.
version: 1 dn:: b3U95Za25qWt6YOoLG89QWlyaXVz
- dn:: ou=<JapaneseOU>,o=Airius
objectclass: top objectclass: organizationalUnit ou:: 5Za25qWt6YOo
- ou:: <JapaneseOU>
ou;lang-ja:: 5Za25qWt6YOo
- ou;lang-ja:: <JapaneseOU>
ou;lang-ja;phonetic:: 44GI44GE44GO44KH44GG44G2
- ou;lang-ja:: <JapaneseOU_in_phonetic_representation>
ou;lang-en: Sales description: Japanese office
dn:: dWlkPXJvZ2FzYXdhcmEsb3U95Za25qWt6YOoLG89QWlyaXVz
- dn:: uid=<uid>,ou=<JapaneseOU>,o=Airius
userpassword: {SHA}O3HSv1MusyL4kTjP+HKI5uxuNoM= objectclass: top objectclass: person objectclass: organizationalPerson objectclass: inetOrgPerson uid: rogasawara mail: [email protected] givenname;lang-ja:: 44Ot44OJ44OL44O8
- givenname;lang-ja:: <JapaneseGivenname>
sn;lang-ja:: 5bCP56yg5Y6f
- sn;lang-ja:: <JapaneseSn>
cn;lang-ja:: 5bCP56yg5Y6fIOODreODieODi+ODvA==
- cn;lang-ja:: <JapaneseCn>
title;lang-ja:: 5Za25qWt6YOoIOmDqOmVtw==
- title;lang-ja:: <JapaneseTitle>
preferredlanguage: ja givenname:: 44Ot44OJ44OL44O8
- givenname:: <JapaneseGivenname>
sn:: 5bCP56yg5Y6f
- sn:: <JapaneseSn>
cn:: 5bCP56yg5Y6fIOODreODieODi+ODvA==
- cn:: <JapaneseCn>
title:: 5Za25qWt6YOoIOmDqOmVtw==
- title:: <JapaneseTitle>
givenname;lang-ja;phonetic:: 44KN44Gp44Gr44O8
- givenname;lang-ja;phonetic::
<JapaneseGivenname_in_phonetic_representation_kana> sn;lang-ja;phonetic:: 44GK44GM44GV44KP44KJ
- sn;lang-ja;phonetic:: <JapaneseSn_in_phonetic_representation_kana>
cn;lang-ja;phonetic:: 44GK44GM44GV44KP44KJIOOCjeOBqeOBq+ODvA==
- cn;lang-ja;phonetic:: <JapaneseCn_in_phonetic_representation_kana>
title;lang-ja;phonetic:: 44GI44GE44GO44KH44GG44G2IOOBtuOBoeOCh+OBhg==
- title;lang-ja;phonetic::
- <JapaneseTitle_in_phonetic_representation_kana>
givenname;lang-en: Rodney sn;lang-en: Ogasawara cn;lang-en: Rodney Ogasawara title;lang-en: Sales, Director
Example 5: A file containing a reference to an external file
version: 1 dn: cn=Horatio Jensen, ou=Product Testing, dc=airius, dc=com objectclass: top objectclass: person objectclass: organizationalPerson cn: Horatio Jensen
cn: Horatio N Jensen sn: Jensen uid: hjensen telephonenumber: +1 408 555 1212 jpegphoto:< file:///usr/local/directory/photos/hjensen.jpg
Example 6: A file containing a series of change records and comments
version: 1
- Add a new entry
dn: cn=Fiona Jensen, ou=Marketing, dc=airius, dc=com changetype: add objectclass: top objectclass: person objectclass: organizationalPerson cn: Fiona Jensen sn: Jensen uid: fiona telephonenumber: +1 408 555 1212 jpegphoto:< file:///usr/local/directory/photos/fiona.jpg
- Delete an existing entry
dn: cn=Robert Jensen, ou=Marketing, dc=airius, dc=com changetype: delete
- Modify an entry's relative distinguished name
dn: cn=Paul Jensen, ou=Product Development, dc=airius, dc=com changetype: modrdn newrdn: cn=Paula Jensen deleteoldrdn: 1
- Rename an entry and move all of its children to a new location in
- the directory tree (only implemented by LDAPv3 servers).
dn: ou=PD Accountants, ou=Product Development, dc=airius, dc=com changetype: modrdn newrdn: ou=Product Development Accountants deleteoldrdn: 0 newsuperior: ou=Accounting, dc=airius, dc=com
- Modify an entry: add an additional value to the postaladdress
- attribute, completely delete the description attribute, replace
- the telephonenumber attribute with two values, and delete a specific
- value from the facsimiletelephonenumber attribute
dn: cn=Paula Jensen, ou=Product Development, dc=airius, dc=com changetype: modify add: postaladdress postaladdress: 123 Anystreet $ Sunnyvale, CA $ 94086 -
delete: description - replace: telephonenumber telephonenumber: +1 408 555 1234 telephonenumber: +1 408 555 5678 - delete: facsimiletelephonenumber facsimiletelephonenumber: +1 408 555 9876 -
- Modify an entry: replace the postaladdress attribute with an empty
- set of values (which will cause the attribute to be removed), and
- delete the entire description attribute. Note that the first will
- always succeed, while the second will only succeed if at least
- one value for the description attribute is present.
dn: cn=Ingrid Jensen, ou=Product Support, dc=airius, dc=com changetype: modify replace: postaladdress - delete: description -
Example 7: An LDIF file containing a change record with a control version: 1
- Delete an entry. The operation will attach the LDAPv3
- Tree Delete Control defined in [9]. The criticality
- field is "true" and the controlValue field is
- absent, as required by [9].
dn: ou=Product Development, dc=airius, dc=com control: 1.2.840.113556.1.4.805 true changetype: delete
Security Considerations
Given typical directory applications, an LDIF file is likely to contain sensitive personal data. Appropriate measures should be taken to protect the privacy of those persons whose data is contained in an LDIF file.
Since ":<" directives can cause external content to be included when processing an LDIF file, one should be cautious of accepting LDIF files from external sources. A "trojan" LDIF file could name a file with sensitive contents and cause it to be included in a directory entry, which a hostile entity could read via LDAP.
LDIF does not provide any method for carrying authentication information with an LDIF file. Users of LDIF files must take care to verify the integrity of an LDIF file received from an external source.
Acknowledgments
The LDAP Interchange Format was developed as part of the University of Michigan LDAP reference implementation, and was developed by Tim Howes, Mark Smith, and Gordon Good. It is based in part upon work supported by the National Science Foundation under Grant No. NCR- 9416667.
Members of the IETF LDAP Extensions Working group provided many helpful suggestions. In particular, Hallvard B. Furuseth of the University of Oslo made many significant contributions to this document, including a thorough review and rewrite of the BNF.
References
[1] Howes, T. and M. Smith, "A MIME Content-Type for Directory
Information", RFC 2425, September 1998.
[2] Crocker, D., and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", RFC 2234, November 1997.
[3] Wahl, M., Kille, S. and T. Howes, "A String Representation of
Distinguished Names", RFC 2253, December 1997.
[4] Wahl, M., Howes, T. and S. Kille, "Lightweight Directory Access
Protocol (v3)", RFC 2251, July 1997.
[5] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message Bodies",
RFC 2045, November 1996.
[6] Berners-Lee, T., Masinter, L. and M. McCahill, "Uniform
Resource Locators (URL)", RFC 1738, December 1994.
[7] Bradner, S., "Key Words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[8] The SLAPD and SLURPD Administrators Guide. University of
Michigan, April 1996. <URL:
http://www.umich.edu/~dirsvcs/ldap/doc/guides/slapd/toc.html>
[9] M. P. Armijo, "Tree Delete Control", Work in Progress.
Author's Address
Gordon Good iPlanet e-commerce Solutions 150 Network Circle Mailstop USCA17-201 Santa Clara, CA 95054, USA
Phone: +1 408 276 4351 EMail: [email protected]
Full Copyright Statement
Copyright (C) The Internet Society (2000). All Rights Reserved.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the Internet Society.
