RFC4154

From RFC-Wiki

Network Working Group M. Terada Request for Comments: 4154 NTT DoCoMo Category: Informational K. Fujimura

                                                                 NTT
                                                      September 2005

Voucher Trading System Application Programming Interface (VTS-API)

Status of This Memo

This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited.

Copyright Notice

Copyright (C) The Internet Society (2005).

IESG Note

This document is not a candidate for any level of Internet Standard. This document specifies the Voucher Trading System Application Programming Interface (VTS-API), which assumes that the VTS plug-in is trusted by its user. The application making calls to VTS-API ought to authenticate the VTS plug-in and securely bind the plug-in with the VTS provider information specified in the Voucher Component. However, this document does not specify an approach to application authentication. The VTS-API should not be used without being augmented by an application authentication mechanism.

Abstract

This document specifies the Voucher Trading System Application Programming Interface (VTS-API). The VTS-API allows a wallet or other application to issue, transfer, and redeem vouchers in a uniform manner independent of the VTS implementation. The VTS is a system for securely transferring vouchers; e.g., coupons, tickets, loyalty points, and gift certificates. This process is often necessary in the course of payment and/or delivery transactions.

Introduction

This document specifies the Voucher Trading System Application Programming Interface (VTS-API). The motivation and background of the Voucher Trading System (VTS) are described in Requirements for Generic Voucher Trading [VTS].

A voucher is a logical entity that represents a certain right, and it is logically managed by the VTS. A voucher is generated by the issuer, traded among users, and finally collected using VTS. The terminology and model of the VTS are also described in [VTS].

VTSes can be implemented in different ways, such as a centralized VTS, which uses a centralized online server to store and manage all vouchers, or a distributed VTS, which uses per-user smartcards to maintain the vouchers owned by each user. However, the VTS-API allows a caller application to issue, transfer, and redeem vouchers in a uniform manner independent of the VTS implementation. Several attempts have been made to provide a generic payment API. Java Commerce Client [JCC] and Generic Payment Service Framework [GPSF], for example, introduce a modular wallet architecture that permits diverse types of payment modules to be added as plug-ins and supports both check-like/cash-like payment models. This document is inspired by these approaches but its scope is limited to the VTS model, in which the cash-like payment model is assumed and vouchers are directly or indirectly transferred between the sender (transferor) and receiver (transferee) via the VTS. This document is not intended to support API for SET, e-check, or other payment schemes that do not fit the VTS model.

Unlike the APIs provided in JCC and GPSF, which are designed to transfer only monetary values, this API enables the transfer of a wide range of values through the use of XML-based Generic Voucher Language [GVL]. The monetary meaning of the voucher is interpreted by the upper application layer using the information described in the language. This approach makes it possible to provide a simpler API in the voucher-transfer layer and enhances runtime efficiency. The

API specification in this document is described in the Java language syntax. Bindings for other programming languages may be completed in a future version of this document or in separate related specifications.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119

Processing Model

This section provides the processing model in which the VTS-API is used. A part of the text in this section has been taken from the Generic Voucher Language specification [GVL].

There are several ways to implement VTS. For discount coupons or event tickets, for example, a smartcard-based distributed offline VTS is often preferred, whereas for bonds or securities, a centralized online VTS is preferred. While distributed VTSes would utilize public (asymmetric) key-based or shared (symmetric) key-based cryptographic challenge-and-response protocols to trade vouchers securely, centralized VTSes would utilize transactions that rewrite ownerships of vouchers on their database. Therefore, it is impractical to define standard protocols for issuing, transferring, or redeeming vouchers at this time.

To provide implementation flexibility, this document assumes a modular wallet architecture that allows multiple VTSes to be added as plug-ins. In this architecture, instead of specifying a standard voucher transfer protocol, two specifications, Voucher Component and VTS-API, are standardized (Figure 1).

Sender wallet/Issuing system Receiver wallet/Collecting system +---------------------------+ +---------------------------+ | | | | | | Voucher Component | | | | (Specifies VTS Provider and Promise) | | | |-------------------------------------------------------->| | | | | | | | | | Intention to receive and payment (option) | | | |<- - - - - - - - - - - - - - - - - - - - - - - - - - - - | | | | | | | | | | | | | | | | Issue/transfer/ VTS | | VTS Register | | | | redeem request plug-in | plug-in Listener(*1)| | | |------------------>| | | |<------------------| | | | (VTS API) |<- - - - - - - ->| (VTS API) | | | | | VTS-specific | | | | | | protocol if VTS | | | | | | is distributed | | | | | Result |<- - - - - - - ->| Notify(*2) | | | |<------------------| | | |------------------>| | +---------------------------+ +---------------------------+

(*1) Registration is optional. Note also that the VTS plug-ins are

    usually pre-registered when the wallet or collecting system
    is started.

(*2) If a listener is registered.

          Figure 1. Wallet architecture with VTS plug-ins

In this architecture, a VTS provides a logical view of vouchers called a Valid Voucher Set (VVS), which is a set that includes the vouchers <I,P,H> managed by the VTS [VTS]. A user's wallet can access (e.g., view, transfer, and redeem) the subset of the VVS that includes a set of vouchers owned by the user by interacting with the VTS plug-in via the VTS-API. Likewise, an issuing system can issue a voucher and add it to the VVS, and a collecting system can be notified of the redemption of vouchers via the VTS-API.

After a sender and a receiver agree on what vouchers are to be traded and which VTS is to be used, the issuing system or wallet system requests the corresponding VTS plug-in to permit the issue, transfer, or redemption transactions to be performed via the VTS-API. The VTS then logically rewrites the ownership of the vouchers on the VVS using the VTS-specific protocol. Since the VTS is responsible for preventing illegal acts on vouchers like forgery or reproduction, as required in [VTS], the protocol would include a cryptographic challenge-and-response (in a distributed VTS) or a transactional

database manipulation with adequate access controls (in a centralized VTS). Finally, a completion event is sent to the wallet systems or issuing/collecting systems.

This document describes the VTS-API specification. See [GVL] for the Voucher Component specification that gives the syntax and semantics for describing and interpreting the meaning of vouchers.

Design Overview

We have adopted the following approach to specify the VTS-API.

  1) Provide an abstract and uniform API that encapsulates the VTS
     implementation.  For example, a common API is provided for both
     centralized and distributed VTSes.  Issuers and application
     developers have more freedom in VTS selection.
  2) To provide an abstract and uniform API, this document
     introduces an interface called VTSAgent that is associated with
     a holder and provides methods to manipulate vouchers held by
     its holder.  Vouchers are accessed through the methods provided
     by the VTSAgent.
  3) Use existing standards for the VTS branding mechanism
     (negotiation).  This document assumes that the VTS to be used
     for sending a voucher has settled the VTS-APIs are called.
     Negotiation can be done within the upper application layer
     using other standards (e.g., [IOTP] or [ECML]), if necessary.
  4) Support only the push-type voucher transfer interface, in which
     the voucher transfer session is initiated by the transferor
     side.  A pull-type voucher transfer interface can be
     implemented on top of the push-type VTS interface at the
     application level.

Concepts

The VTS-API consists of the following interfaces. A VTS is required to implement all of the interfaces except ReceptionListener, which is intended to be implemented by wallets or other applications that use VTS.

  VTSManager
     Provides the starting point for using a VTS plug-in.  All of
     the objects needed to manipulate vouchers can be directly or
     indirectly acquired via the VTSManager.  A VTSManager maintains
     the two repositories: a ParticipantRepository and a
     VoucherComponentRepository, both of which are described below.
  ParticipantRepository
     Provides the access points of participants that are to be
     trading partners.  A ParticipantRepository maintains
     Participants and acts as an "address book" of trading partners.
  Participant
     Represents a participant (such as an issuer, a holder, or a
     collector).  A Participant interface knows how to obtain the
     corresponding VTSAgent described below.
  VTSAgent (extends Participant)
     Provides the access point of vouchers in the Valid Voucher Set
     (VVS) that is logically managed by the VTS.  A VTSAgent
     provides a means of manipulating vouchers held by its holder
     according to basic trading methods; i.e., issue, transfer,
     consume, and present.  Before calling trading methods, the
     application must create a Session, which is described below.
  Session
     Represents the logical connection established by the trade.  A
     Session has references to two Participant interfaces; i.e.,
     those of the sender and the receiver.  After trading methods
     are called using a Session, the Session holds a reference to
     the Vouchers to be traded.
  Voucher
     Represents one or more vouchers in which all of the issuer and
     promise parts of the vouchers are the same.  A Voucher holds
     references to the Participant interface who issued the voucher
     (issuer) and to a VoucherComponent (promise), which is
     described below.
  VoucherComponent
     Represents a Voucher Component, described in [GVL].  It defines
     the promise part of the voucher.
  VoucherComponentRepository
     Provides the access points of VoucherComponents.  A
     VoucherComponentRepository maintains VoucherComponents and acts
     as a "voucher type book" managed by the VTS.  This document
     assumes that a set of VoucherComponents has been acquired and
     stored in this repository.  Delivery of VoucherComponents is
     beyond the scope of this document.  It may be delivered within
     the VTS from the trading partners or manually acquired from a
     trusted third party (see Section 3 of [GVL]).
  ReceptionListener
     Provides a listener function with regard to the receipt of a
     voucher by a VTSAgent to wallets or other applications that
     implement this interface.  (This interface may not be
     implemented as part of the VTS.)

Interface Definitions

The interfaces defined in this document reside in the package named "org.ietf.vts". Wallets or other applications that use this API, should import this package as "import org.ietf.vts.*;".

VTSManager

public interface VTSManager

  Provides the starting point for using a VTS plug-in.
  All of the objects needed to manipulate vouchers can be directly
  or indirectly acquired via a VTSManager so that wallets or other
  applications can make the VTS available by instantiating an object
  implementing this interface.
  A class that implements the VTSManager interface must have a
  public default constructor (a constructor without any parameters).
  The VTS provides a name for such a constructor so that the
  implementation class can bootstrap the interface.

getParticipantRepository

public ParticipantRepository getParticipantRepository()

  Returns a repository that maintains Participants.

Returns:

  the ParticipantRepository of the VTS, or null if no
  ParticipantRepository is available.

getVoucherComponentRepository

public VoucherComponentRepository getVoucherComponentRepository()

  Returns a repository that maintains VoucherComponents.

Returns:

  the VoucherComponentRepository of the VTS, or null if no
  VoucherComponentRepository is available.

ParticipantRepository

public interface ParticipantRepository

  Provides the access points of Participants.  A
  ParticipantRepository maintains Participants and acts as an
  "address book" of trading partners.
  The object implementing this interface maintains Participants (or
  holds a reference to an object maintaining Participants), which
  are to be trading partners.
  The implementation of a ParticipantRepository may be either (an
  adaptor to) "yellow pages", which is a network-wide directory
  service like LDAP, or "pocket address book", which maintains only
  personal acquaintances.

lookup

public Participant lookup(String id)

  Retrieves the participant that has the specified id.

Returns:

  the participant associated with the specified id, or null if the
  id is null or the corresponding participant cannot be found.

Participant

public interface Participant

  Represents the participants (such as issuers, holders, and
  collectors).
  This interface is used as a representation of the trade partners
  and issuers of vouchers.  Anyone can retrieve objects that
  implement Participants from the participant repository.

getIdentifier

public String getIdentifier()

  Returns the identifier of the participant.  Each participant must
  have a unique identifier.
  The identifier can be used for looking up and retrieving the
  participant via the ParticipantRepository.
  The format of the identifier is implementation-specific.

Returns:

  the identifier string of the participant.

getVTSAgent

VTSAgent getVTSAgent()

  Returns a VTSAgent, whose identifier is the same as the identifier
  of the participant.

Returns:

  an object that implements the VTSAgent.

VTSAgent

public interface VTSAgent extends Participant

  Represents contact points to access vouchers in a Valid Voucher
  Set (VVS) that is managed by the VTS.
  Each VTSAgent is associated with a holder and provides a means for
  managing vouchers owned by the holder.  The holder must be
  authenticated using the login() method before being called by any
  other method, otherwise, a VTSSecurityException will be issued.
  Before any trading method is called, e.g., issue(), transfer(),
  consume(), and present(), the application must establish a session
  by the prepare() method.
  Due to network failure, sessions may often be suspended when the
  voucher is sent via a network.  The suspended sessions can be
  restarted by the resume() method.  Details on the state management
  of a session are described in Section 5.5.
  Some VTSAgents may not have all of the trading methods; a voucher
  collecting system doesn't require its VTSAgent to provide a method
  for issuing or creating vouchers.  A VTSAgent returns a
  FeatureNotAvailableException when an unsupported method is
  invoked.

login

public void login(String passphrase)

      throws VTSException
  Authenticates the VTSAgent.  The passphrase is specified if the
  VTS requires it for authentication, otherwise it must be null.
  Nothing is performed if the VTSAgent has already been logged-in.
  The authentication scheme is implementation-specific.  Examples of
  the implementation are as follows:
  1) Vouchers are managed on a remote centralized server
     (centralized VTS), which requires a password to login.  In this
     case, the application may prompt the user to input the password
     and the password can be given to the VTSAgent through this
     method.  For further information, see the Implementation Notes
     below.
  2) Vouchers are managed on a remote centralized server
     (centralized VTS), which requires challenge-and-response
     authentication using smartcards held by users.  In this case,
     the passphrase may be null because access to the smartcard can
     be done without contacting the application or user (i.e., the
     VTSAgent receives the challenge from the server, sends the
     challenge to the smartcard (within the VTS), and returns the
     response from the smartcard to the server).  Note that a PIN to
     unlock the smartcard may be given through this method,
     depending on the implementation.
  3) Each user holds their own smartcard in which their own vouchers
     are stored (distributed VTS).  In this case, the passphrase may
     be null because no authentication is required.  Note that a PIN
     to unlock the smartcard may be given, though this depends on
     the implementation.
  Implementation Notes:
     A VTS is responsible for providing secure ways for users to
     login().  It is strongly recommended that secure communication
     channels such as [TLS] be used if secret or private information
     is sent via networks.  Fake server attacks, including the so-
     called MITM (man-in-the-middle), must be considered as well.

Throws:

  VTSSecurityException - if authentication fails.

logout

public void logout()

      throws VTSException
  Voids the authentication performed by the login() method.
  After this method is called, calling any other method (except
  login()) will cause a VTSSecurityException.
  The VTSAgent can login again by the login() method.

Throws:

  VTSSecurityException - if the VTSAgent is not authenticated
  correctly.

prepare

public Session prepare(Participant receiver)

      throws VTSException
  Establishes a session that is required for trading vouchers.  The
  trading partner who receives the vouchers is specified as the
  receiver.  The vouchers to be traded will be specified later (when
  a trading method is called).
  The establishment of a session is implementation-specific.  A
  centralized VTS implementation may start a transaction, while a
  distributed VTS implementation may get the challenge needed to
  create an authentic response from the receiver in the following
  trading method.
  If the VTSAgent does not have the ability to establish a session
  with the specified receiver (permanent error), the VTSAgent throws
  an InvalidParticipantExeption.  If the VTSAgent cannot establish a
  session due to network failure (transient error), the VTSAgent
  throws a CannotProceedException.

Parameters:

  receiver - the trading partner who receives vouchers.

Returns:

  an established session whose state is "prepared" (see Section
  5.5).

Throws:

  CannotProceedException - if the preparation of the session is
     aborted (e.g., network failures).
  FeatureNotAvailableException - if the VTSAgent does not provide
     any trading methods.
  InvalidParticipantException - if the specified participant is
     invalid.
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

issue

public void issue(Session session,

                 VoucherComponent promise,
                 java.lang.Number num)
      throws VTSException
  Issues vouchers.  This method creates the specified number of
  vouchers <this, promise, receiver> and adds them to the VVS.  If
  the VTS is distributed, this method would create a "response" that
  corresponds to the challenge received in the prepare() method and
  send it to the receiver.  Note that the receiver is specified when
  prepare() is called.  Nothing is performed if the specified number
  is 0.
  The session MUST be "prepared" when calling this method.  The
  state of the session will be "activated" when the vouchers are
  created, and it will be "completed" when the transaction is
  successfully completed or "suspended" if the transaction is
  interrupted abnormally (e.g., network failures).

Parameters:

  session - the session used by the issue transaction.
  promise - the promise part of the voucher.
  num - the number of vouchers to be issued.

Throws:

  CannotProceedException - if the transaction cannot be successfully
     completed.
  FeatureNotAvailableException - if the VTSAgent does not provide a
     means of issuing vouchers.
  InvalidStateException - if the session is not "prepared".
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

transfer

public void transfer(Session session,

                    Participant issuer,
                    VoucherComponent promise,
                    java.lang.Number num)
      throws VTSException
  Transfers vouchers.  This method rewrites the specified number of
  vouchers <issuer, promise, this> to <issuer, promise, receiver> in
  the VVS; i.e., deletes the vouchers from the sender and stores
  them for the receiver.  Similar to issue(), this method would
  create and send the response to the receiver if the VTS is
  distributed.  The VTSAgent must have sufficient vouchers in the
  VVS.  Nothing is performed if the specified number is 0.
  The session MUST be "prepared" when calling this method.  The
  state of the session will be "activated" when the voucher are
  retrieved from the sender, and it will be "completed" when the
  transaction is successfully completed or "suspended" if the
  transaction is interrupted abnormally (e.g., network failures).
  If null is specified for the issuer parameter, it indicates "any
  issuer".  This method selects vouchers to be transferred from the
  set of vouchers returned by the getContents(null, promise).

Parameters:

  session - the session used by the transfer transaction.
  issuer - the issuer part of the voucher, or null.
  promise - the promise part of the voucher.
  num - the number of vouchers to be transferred.

Throws:

  CannotProceedException - if the transaction cannot be successfully
     completed.
  FeatureNotAvailableException - if the VTSAgent does not provide a
     means of transferring vouchers.
  InsufficientVoucherException - if the VTSAgent does not have a
     sufficient number of vouchers to transfer.
  InvalidStateException - if the session is not "prepared".
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

consume

public void consume(Session session,

                   Participant issuer,
                   VoucherComponent promise,
                   java.lang.Number num)
      throws VTSException
  Consumes vouchers.  This method deletes the specified number of
  vouchers <issuer, promise, this> from the VVS and notifies the
  receiver of the deletion.  Similar to issue() and transfer(), the
  response would be created and sent to the receiver if the VTS is
  distributed so that the receiver can obtain proof of the deletion.
  The VTSAgent must have a sufficient number of vouchers in the VVS.
  Nothing is performed if the specified number is 0.
  The session MUST be "prepared" when this method is called.  The
  state of the session will be "activated" when the vouchers are
  deleted, and it will be "completed" when the transaction is
  successfully completed or "suspended" if the transaction is
  interrupted abnormally (e.g., network failures).
  If null is specified for the issuer parameter, it indicates "any
  issuer".  This method selects vouchers to be consumed from the set
  of vouchers returned by the getContents(null, promise).

Parameters:

  session - the session used by the consume transaction.
  issuer - the issuer part of the voucher, or null.
  promise - the promise part of the voucher.
  num - the number of vouchers to be consumed.

Throws:

  CannotProceedException - if the transaction cannot be successfully
     completed.
  FeatureNotAvailableException - if the VTSAgent does not provide a
     means of consuming vouchers.
  InsufficientVoucherException - if the VTSAgent does not have a
     sufficient number of vouchers to consume.
  InvalidStateException - if the session is not "prepared".
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

present

public void present(Session session,

                   Participant issuer,
                   VoucherComponent promise,
                   java.lang.Number num)
      throws VTSException
  Presents vouchers.  This method shows that the sender has the
  specified number of vouchers <issuer, promise, this> in the VVS to
  the receiver of the session; no modification is performed to the
  VVS.  However, the response would be sent to the receiver as well
  as consume() in order to prove that the VTS has been distributed.
  The VTSAgent must have a sufficient number of vouchers in the VVS.
  Nothing is performed if the specified number is 0.
  The session MUST be "prepared" when this method is called.  The
  state of the session will be "activated" when the vouchers are
  retrieved, and it will be "completed" when the transaction is
  successfully completed or "suspended" if the transaction is
  interrupted abnormally (e.g., by network failures).
  If null is specified for the issuer parameter, it indicates "any
  issuer".  This method selects vouchers to be presented from the
  set of vouchers returned by the getContents(null, promise).

Parameters:

  session - the session used by the present transaction.
  issuer - the issuer part of the voucher, or null.
  promise - the promise part of the voucher.
  num - the number of the voucher to be presented.

Throws:

  CannotProceedException - if the transaction cannot be successfully
     completed.
  InsufficientVoucherException - if the VTSAgent does not have a
     sufficient number of vouchers to present.
  InvalidStateException - if the session is not "prepared".
  FeatureNotAvailableException - if the VTSAgent does not provide a
     means of presenting vouchers.
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

cancel

public void cancel(Session session)

      throws VTSException
  Releases the session.  "Prepared" sessions MUST be canceled.  An
  implementation MAY be permitted to cancel "activated" or
  "suspended" sessions.

Throws:

  InvalidStateException - if the state of the session cannot be
     canceled.
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

resume

public void resume(Session session)

      throws VTSException
  Restarts the session.  Only "suspended" sessions can be resumed.
  The state of the session will be re-"activated" immediately, and
  it will be "completed" when the transaction is successfully
  completed or "suspended" again if the transaction is interrupted
  abnormally (e.g., network failures).

Throws:

  CannotProceedException - if the transaction cannot be successfully
     completed.
  InvalidStateException - if the session is not "suspended".
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.10. create

public void create(VoucherComponent promise, java.lang.Number num)

      throws VTSException
  Creates vouchers where the issuer is the VTSAgent itself.  This
  method creates the specified number of vouchers <this, promise,
  this> and adds them to the VVS.  Nothing is performed if the
  specified number is 0.

Throws:

  FeatureNotAvailableException - if the VTSAgent does not provide a
     means of creating vouchers.
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.11. delete

public void delete(Participant issuer, VoucherComponent promise,

                  java.lang.Number num)
      throws VTSException
  Deletes vouchers.  This method deletes the specified number of
  vouchers <issuer, promise, this> from the VVS.  The VTSAgent must
  have sufficient vouchers in the VVS.  Nothing is performed if the
  specified number is 0.

Throws:

  InsufficientVoucherException - if the VTSAgent does not have a
     sufficient number of vouchers to delete.
  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.12. getContents

public java.util.Set getContents(Participant issuer,

                                VoucherComponent promise)
      throws VTSException
  Returns the set of vouchers whose issuer and promise both match
  the issuer and promise specified in the parameters.
  If null is specified for the issuer or promise parameter, it
  indicates "any issuer" or "any promise", respectively.  If null is
  specified for both parameters, this method selects all vouchers
  owned by the holder from the VVS.

Returns:

  the set of vouchers held by the holder of the VTSAgent.

Throws:

  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.13. getSessions

public java.util.Set getSessions()

      throws VTSException
  Returns a set of incomplete sessions prepared by the VTSAgent.

Returns:

  the set of sessions prepared by the VTSAgent that are not yet
  completed.

Throws:

  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.14. getLog

public java.util.Set getLog()

      throws VTSException
  Returns a set of completed sessions prepared or received by the
  VTSAgent.  This set represents the trading log of the VTSAgent.  A
  VTS may delete an old log eventually, so that the entire log may
  not be returned; the amount of the log kept by the VTSAgent is
  implementation-specific.

Returns:

  the set of completed sessions prepared or received by the
  VTSAgent.

Throws:

  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.15. addReceptionListener

public void addReceptionListener(ReceptionListener l)

      throws VTSException
  Adds a ReceptionListener to the listener list.
  After a ReceptionListener l is registered by this method,
  l.arrive() will be called whenever the VTSAgent receives a
  voucher.
  Nothing is performed if the specified listener is null.

Throws:

  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

5.4.16. removeReceptionListener

public void removeReceptionListener(ReceptionListener l)

      throws VTSException
  Removes a ReceptionListener from the listener list.
  Nothing is performed when the specified listener is null or not
  registered.

Throws:

  VTSSecurityException - if the VTSAgent cannot be authenticated
     correctly.

Session

public interface Session

  Represents the logical connection established by the trade.
  Sessions are established by VTSAgent#prepare().
  A session has four states: prepared, activated, suspended, and
  completed.  The initial state of a session is "prepared", and the
  session will be "activated" immediately when any of the trading
  methods of VTSAgent is called.  The "activated" session will be
  "completed" after the trading method is successfully completed.
  If the trading method fails transiently (e.g., network failure),
  the session will be "suspended".  Suspended sessions can be re-
  "activated" and restarted by calling VTSAgent#resume().
  A completed session may disappear from the VTSAgent; the session
  will be collected by the GC unless other objects keep its
  reference.

getIdentifier

public String getIdentifier()

  Returns the identifier of the session.  The generation scheme of
  the identifier is implementation-specific.  An implementation may
  use a transaction ID as the identifier of the session.

Returns:

  the string of the identifier of the session.

getVoucher

public Voucher getVoucher()

  Returns the voucher to be traded using the session, or returns
  null if the session has not been activated.

Returns:

  the voucher to be traded, or null if the state of the session is
  "prepared".

getSender

public Participant getSender()

  Returns the sender of the session (i.e., the creator who prepared
  the session).

Returns:

  the sender of the session.

getReceiver

public Participant getReceiver()

  Returns the receiver of the session (i.e., the participant
  specified when preparing the session (by the VTSAgent#prepare()
  method)).

Returns:

  the receiver of the session.

isPrepared

public boolean isPrepared()

  Verifies if the session is "prepared".

Returns:

  true if the session is in the "prepared" state, otherwise, false.

isActivated

public boolean isActivated()

  Verifies if the session is "activated".

Returns:

  true if the session is in the "activated" state, otherwise, false.

isSuspended

public boolean isSuspended()

  Verifies if the session is "suspended".

Returns:

  true if the session is in the "suspended" state, otherwise, false.

isCompleted

public boolean isCompleted()

  Verifies if the session is "completed".

Returns:

  true if the session is in the "completed" state, otherwise, false.

Voucher

public interface Voucher

  Represents voucher(s) described in [VTS].  An object implementing
  this interface can represent more than one voucher if all of the
  issuer part and the promise part of the vouchers are the same.

getIssuer

public Participant getIssuer()

  Returns the issuer part of the voucher(s).

Returns:

  the participant who issued the voucher(s).

getPromise

public VoucherComponent getPromise()

  Returns the promise part of the voucher(s).

Returns:

  the voucher component that defines the promise of the voucher.

getCount

public java.lang.Number getCount()

  Returns the number of the voucher(s).

Returns:

  the positive (>0) number of the voucher(s).

VoucherComponentRepository

public interface VoucherComponentRepository

  Maintains VoucherComponents.
  An object implementing VoucherComponentRepository provides a means
  of retrieving the voucher components that are the promises of
  vouchers in the VVS.
  Before issuing a voucher, the promise of the voucher must be
  registered with this repository.  The repository can be
  implemented as either a network-wide directory service or personal
  storage like the ParticipantRepository.

register

public VoucherComponent register(org.w3c.dom.Document document)

  Creates a voucher component associated with the specified DOM
  object and registers the voucher component with the repository.
  A voucher component of the voucher to be issued must be registered
  using this method.
  Nothing is performed (and the method returns null) if the
  specified document is null or the syntax of the document does not
  conform to the VTS.
  The method returns the registered voucher component if the
  specified DOM object has been already registered (no new voucher
  component is created in this case).

Returns:

  a registered voucher component associated with the specified
  document, or null if the document is null or has wrong syntax.

VoucherComponent

public interface VoucherComponent

  Represents the voucher component that defines the promise of the
  voucher.
  Each VoucherComponent object has its own unique identifier and is
  associated with an XML document that describes the promise made by
  the issuer of the voucher (e.g., goods or services can be claimed
  in exchange for redeeming the voucher).
  This interface can be implemented as sort of a "smart pointer" to
  the XML document.  An implementation may have a reference to a
  voucher component repository instead of the voucher component, and
  it may retrieve the document dynamically from the repository when
  the getDocument() method is called.

getIdentifier

public String getIdentifier()

  Returns the identifier of the voucher component.  Each voucher
  component must have a unique identifier.  The identifier may be
  used to check for equivalence of voucher components.
  The format of the identifier is implementation-specific, however,
  it is RECOMMENDED that the hash value of the voucher component in
  the identifier be included to assure uniqueness.  For generating
  the hash value, it is desirable to use a secure hash function
  (e.g., [SHA-1]) and to apply a canonicalization function (e.g.,
  [EXC-C14N]) before applying the hash function to minimize the
  impact of insignificant format changes to the voucher component,
  (e.g., line breaks or character encoding).

Returns:

  the identifier string of the voucher component.

getDocument

public org.w3c.dom.Document getDocument()

  Returns a Document Object Model [DOM] representation of the
  document associated with the voucher component by the
  VoucherComponentRepository#register() method.
  The DOM object to be returned may be retrieved from a
  VoucherComponentRepository on demand, instead of the
  VoucherComponent always keeping a reference to the DOM object.
  The VTS must guarantee that the getDocument method will eventually
  return the DOM object, provided that the voucher associated with
  the corresponding voucher component exists in the VVS.

Returns:

  a DOM representation of the document associated with the voucher
  component.

Throws:

  DocumentNotFoundException - if the associated DOM object cannot be
     retrieved.

ReceptionListener

public interface ReceptionListener extends java.util.EventListener

  Provides a listener interface with a notification that a VTSAgent
  has received a voucher.
  When a voucher arrives at the VTSAgent, the VTSAgent invokes the
  arrive() method of each registered ReceptionListener.
  ReceptionListeners can obtain a Session object, which contains
  information about the received voucher and the sender of the
  voucher.
  This interface is intended to provide a means of notifying a
  wallet that "You have new vouchers", so that this interface may be
  implemented by wallets or other applications that use VTS.

arrive

public void arrive(Session session)

  Provides notification of the arrival of a voucher.
  After the listener is registered to a VTSAgent (by the
  VTSAgent#addReceptionListener() method), the VTSAgent invokes this
  method whenever it receives a voucher.
  The specified session is equivalent to the session used by the
  sender to trade the voucher.  The state of the session is
  "completed" when this method is called.

5.10. Exceptions

  java.lang.Exception
    +-- VTSException
        +-- CannotProceedException
        +-- DocumentNotFoundException
        +-- FeatureNotAvailableException
        +-- InsufficientVoucherException
        +-- InvalidParticipantException
        +-- InvalidStateException
        +-- VTSSecurityException

VTSException

  This is the superclass of all exceptions thrown by the methods in
  the interfaces that construct the VTS-API.

CannotProceedException

  This exception is thrown when a trading is interrupted by network
  failures or other errors.

DocumentNotFoundException

  This exception is thrown when the document associated with a
  voucher component cannot be found.

FeatureNotAvailableException

  This exception is thrown when the invoked method is not supported.

InsufficientVoucherException

  This exception is thrown when the number of the voucher is less
  than the number specified for trading.

InvalidParticipantException

  This exception is thrown when the specified participant cannot be
  located.

InvalidStateException

  This exception is thrown when the state of the session is invalid
  and the operation cannot proceed.

VTSSecurityException

  This exception is thrown when authentication fails, or when a
  method that requires authentication in advance is called without
  authentication.

Example Code

// Issue a voucher

VTSManager vts = new FooVTSManager(); ParticipantRepository addrBook = vts.getParticipantRepository(); VoucherComponentRepository vcr = vts.getVoucherComponentRepository();

Participant you = addrBook.lookup("http://example.org/foo");

 // looks up a trading partner identified as
 // "http://example.org/foo".

VTSAgent me = addrBook.lookup("myName").getVTSAgent();

 // a short-cut name may be used if VTS implementation allows.

VoucherComponent promise = vcr.register(anXMLVoucherDocument);

 // registers a voucher component that corresponds to the voucher
 // to be issued.

try {

 me.login();
   // sets up the issuer's smartcard (assuming distributed VTS).
 s = me.prepare(you);
   // receives a challenge from the partner.
 me.issue(s, promise, 1);
   // sends a voucher using the received challenge.
 me.logout();

} catch (VTSException e) {

   // if an error (e.g., a network trouble) occurs...
 System.err.println("Sorry.");
 e.printStackTrace();
   // this example simply prints a stack trace, but a real wallet
   // may prompt the user to retry (or cancel).

}

// Transfer all my vouchers

VTSManager vts = new FooVTSManager(); ParticipantRepository addrBook = vts.getParticipantRepository();

Participant you = addrBook.lookup("8f42 5aab ffff cafe babe...");

 // some VTS implementations would use a hash value of a public key
 // (aka fingerprint) as an identifier of a participant.

VTSAgent me = addrBook.lookup("myName").getVTSAgent();

try {

 me.login();
 Iterator i = me.getContents(null, null).iterator();
 while (i.hasNext()) {
   Voucher v = (Voucher) i.next();
   s = me.prepare(you);
   me.transfer(s, v.getIssuer(), v.getPromise(), v.getCount());
 }
 me.logout();

} catch (VTSException e) {

 System.err.println("Sorry.");
 e.printStackTrace();

}

// Register an incoming voucher notifier (biff)

VTSManager vts = new FooVTSManager();

ParticipantRepository addrBook = vts.getParticipantRepository(); VTSAgent me = addrBook.lookup("myName").getVTSAgent();

ReceptionListener listener = new ReceptionListener() {

 public void arrive(Session s) {
   System.out.println("You got a new voucher.");
 }

};

try {

 me.login();
 me.addReceptionListener(listener);
 me.logout();

} catch (VTSException e) {

 System.err.println("Sorry.");
 e.printStackTrace();

}

Security Considerations

Security is very important for trading vouchers. VTS implementations are responsible for preventing illegal acts upon vouchers (as described in [VTS]), as well as preventing malicious access from invalid users and fake server attacks, including man-in-the-middle attacks.

The means to achieve the above requirements are not specified in this document because they depend on VTS implementation. However,

securing communication channels (e.g., using TLS) between client VTS plug-ins and the central server in a centralized VTS (as described in 5.4.1 login()), and applying cryptographic challenge-and-response techniques in a distributed VTS are likely to be helpful and are strongly recommended to implement a secure VTS.

This document assumes that the VTS plug-in is trusted by its user. The caller application of a VTS should authenticate the VTS plug-in and bind it securely using the VTS Provider information specified in the Voucher Component. This document, however, does not specify any application authentication scheme and it is assumed to be specified by other related standards. Until various VTS systems are deployed, it is enough to manually check and install VTS plug-ins like other download applications.

Acknowledgements

The following persons, in alphabetic order, contributed substantially to the material herein:

  Donald Eastlake 3rd
  Iguchi Makoto
  Yoshitaka Nakamura
  Ryuji Shoda

Normative References

[DOM] V. Apparao, S. Byrne, M. Champion, S. Isaacs, I. Jacobs,

          A. Le Hors, G. Nicol, J. Robie, R. Sutor, C. Wilson, and
          L. Wood.  "Document Object Model (DOM) Level 1
          Specification", W3C Recommendation, October 1998,
          <http://www.w3.org/TR/1998/REC-DOM-Level-1-19981001/>

[GVL] Fujimura, K. and M. Terada, "XML Voucher: Generic Voucher

          Language", RFC 4153, September 2005.

RFC2119 Bradner, S., "Key words for use in RFCs to Indicate

          Requirement Levels", BCP 14, RFC 2119, March 1997.

10. Informative References

[ECML] Eastlake 3rd, D., "Electronic Commerce Modeling Language

          (ECML) Version 2 Specification", RFC 4112, June 2005.

[EXC-C14N] J. Boyer, D. Eastlake, and J. Reagle, "Exclusive XML

          Canonicalization Version 1.0", W3C Recommendation, July
          2002, <http://www.w3.org/TR/2002/REC-xml-exc-c14n-
          20020718/>

[GPSF] G. Lacoste, B. Pfitzmann, M. Steiner, and M. Waidner

          (Eds.), "SEMPER - Secure Electronic Marketplace for
          Europe," LNCS 1854, Springer-Verlag, 2000.

[IOTP] Burdett, D., "Internet Open Trading Protocol - IOTP

          Version 1.0", RFC 2801, April 2000.

[JCC] T. Goldstein, "The Gateway Security Model in the Java

          Electronic Commerce Framework", Proc. of Financial
          Cryptography '97, 1997.

[SHA-1] Department of Commerce/National Institute of Standards and

          Technology, "FIPS PUB 180-1. Secure Hash Standard. U.S.",
          <http://csrc.nist.gov/publications/fips/fips180-2/
          fips180-2withchangenotice.pdf>

[TLS] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",

          RFC 2246, January 1999.

[VTS] Fujimura, K. and D. Eastlake, "Requirements and Design for

          Voucher Trading System (VTS)", RFC 3506, March 2003.

Authors' Addresses

Masayuki Terada NTT DoCoMo, Inc. 3-5 Hikari-no-oka, Yokosuka-shi, Kanagawa, 239-8536 JAPAN

Phone: +81-(0)46-840-3809 Fax: +81-(0)46-840-3705 EMail: [email protected]

Ko Fujimura NTT Corporation 1-1 Hikari-no-oka, Yokosuka-shi, Kanagawa, 239-0847 JAPAN

Phone: +81-(0)46-859-3053 Fax: +81-(0)46-859-1730 EMail: [email protected]

Full Copyright Statement

Copyright (C) The Internet Society (2005).

This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.

This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.

Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.

The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- [email protected].

Acknowledgement

Funding for the RFC Editor function is currently provided by the Internet Society.