RFC615
Network Working Group D. Crocker (UCLA-NMC) Request for Comments: 615 MAR 74 NIC #21531
Proposed Network
Standard Data Pathname Syntax
There seems to be an increasing call for a Network Standard Data Pathname (NSDP); that is, a standardized means of referring to a specific location for/of a collection of bits somewhere on the Network.
The reasons for a standard or virtual anything have been discussed, at length, elsewhere and will not be elaborated upon here. Rather than attack the entire issue of virtual pathnames, I wish only to propose a standardized SYNTAX for specifying pathnames. Such a standard will be useful for 1) users who are unfamiliar with a site or who use several different sites and do not want to have to remember each site's idiosynchracies, 2) programs accessing data at several other sites, and 3) documentation:
The syntax allows the user to specify the necessary network, host, peripheral device, directory, file, type, and site-specific fields. Adding other fields, as needed, is expected to be quite simple.
First the BNF:
<NSDP> ::= % <bulk> <cr><lf>
<bulk> ::= <field> / <field> <bulk>
<field> ::= <key> <L-delim> <name> <R-delim>
<key> ::= NETWORK / HOST / PERIPHERAL/ DIRECTORY /
FILE / TYPE / SITEPARM / N / H / P / D / F /
T / S
<L-delim> ::= any printable character that is not in the
succeeding <name> field and that is
acceptable to the object site: For visual
aesthetics and to facilitate human parsing,
anytime <L-delim> is a left-bracket
character (<, [, (, _), <R-delim> must be
the complementary right-bracket character
(>, ], ), |).
<name> ::= any sequence of characters acceptable to the
object site. This is the actual data field
with the file, directory, device (or
whatever) name.
<R-delim> ::= Either 1) the same character as <L-delim> or
2) if the <L-delim> character is a
left-bracket character (<, [, (, _) then its
complementary right-bracket (>, ], ), |).
-1-�
<cr> ::= carriage-return
<lf> ::= line-feed
And some elaboration:
The syntax allows <name> fields to be an arbitrary number of rs long. Case is irrelevant to the syntax, though some sites will care about case in <name> fields:
<Key> indicates what part of the pathname the next <name> is going to refer to: The single-character keys are abbreviations for the respective full-word keys:
<Fields> ARE order dependent, but defaulted ones may be omitted. The order is as indicated for <key>s: That is, Network, Host, ..: Siteparm:
Fields may be repeated, as appropriate for the object site; that is, multiple Directory fields, etc:
The validity of any combination of <field>s is entirely site-dependent: For example, if a site will accept it, an NSDP with a Host field, and nothing more, is permissible:
<delim> is used to delimit the beginning and end of the <name> field:
Explanation of <key>s:
NETWORK or N: Currently, only ARPA is defined.
HOST or H: Reference to host, by official name or
nickname or number: The default radix is
ten; a numeric string ending with "H"
indicates hexadecimal, "O"(oh) indicates
octal, and (gratuitously) "D" indicates
decimal:
PERIPHERAL or P: Peripheral device being referred to:
DIRECTORY or D: Name of a directory which contains a
pointer to the entity (directory or
filename) specified in the following
<field>:
FILE or F: Basic name of the file or data set:
TYPE or T: Optional modifier to filename: (Tenex
calls it the extension.)
SITEPARM or S: A parameter, such as an access
specification or version number, peculiar
to the object site. The content of the
<name> field must serve to identify what
Siteparm is involved. Each site will be
responsible for defining the syntax of
Siteparm <name>s it will accept.
-2-�
Some reserved PERIPHERAL <name>s:
DISK or DSK: Immediately accessible, direct-access
storage.
ONLINE or ONL: Whatever immediately-accessible (measured
in fractions of a second) storage the
user accesses by default; usually disk:
TAPE or TAP: Industry-compatible magnetic tape:
TAPE7 or TP7: 7-Track industry compatible tape:
TAPE9 or TP9: 9-Track industry compatible tape:
DECTAPE or DEC: DEC Tape.
OFFLINE or OFF: Any tertiary storage; usually tape,
though "devices" like the Datacomputer
are permissible: The user should expect
to wait minutes or hours before being
able to access OFFLINE files:
PRINTER or PTR: Any available line-printer:
DOCPRINTER or DOC:Upper-lower case line printer, preferably
with 8 1/2" X 11" unlined paper.
PAPER or PAP: Paper tape.
PUNCH or PUN: Standard 8O-column card punch.
READER or RDR: Standard 80-column card reader:
OPERATOR or OPR: System Operator's console.
CONSULTANT or CON: On-line consultant.
Defaults:
Defaults will generally be context dependent. Consequently, the following defaults are offered only as guidelines:
Network: ARPA
Host: The host interpreting the NVP
Peripheral: ONLINE (DISK)
Directory: The user's current "working" directory,
usually set by the logon process:
Filename: None.
Type: None.
Siteparm: None.
-3-�
General Comments
The only field that must be considered in relation to any host's current syntax is the escape-to-NVP field (The per-cent sign as the first character of a pathname specification): It is not currently known to conflict with any host's syntax:
Exclamation mark (!) is the only other character that seems permissible (on the assumption that the character should be a graphic): Its use would cause minor problems at Multics; but more importantly as a graphic, it is too similar to the numeral "1":
The syntax is intended to be adequate for all hosts, so any given portion of it may be inappropriate for any given host.
A site is expected to permit specifications in a given field iff that site already has a way of accepting the same information:
I believe that any modifications to the syntax will be graceful additions, rather than wholesale redesign, and thus can be deferred for a while. Currently, any undefined attributes must be specified in a Siteparm field:
Perhaps Version, Access protection and Accounting, as well as other types of information, should be made standard <key>s, rather than buried as Siteparms. I expect that the next version of the NSDP Syntax specification will include them as <key>s, but I would like to wait for some comments from the community.
The syntax does not currently allow addressing any collection of bits smaller than a file: This can be remedied by adding PAGE, BYTE and other <key>s; but, again, I would like to solicit some comments first:
Disclaimer
A pathname specified in the proposed syntax is fairly easy to type but is quite ugly to read: So, at the expense of design cleanliness, the <L-delim>/<R-delim> syntax was modified in an attempt to remedy the problem somewhat: As you will see below, it is only partially successful.
The first draft of this document had a syntax that was a mix of Tenex and Multics conventions: That is,
(Network)[Host]Peripheral:Directory>Filename:Type;Siteparm
Though visually more attractive and generally quicker to type, it lacks extensibility. For example, adding Version number or Access protection as standard fields would be difficult:
It is suggested that human interfaces be built to translate to/from NSDP syntax and the user's standard environment.
-4-�
Some sample pathnames:
%H[ISI]D<DCROCKER>F(MESSAGE)T/TXT/S(P77O4O4)<cr><lf> refers to my
protected message file at ISI (<DCROCKER>MESSAGE:TXT;P77O4O4).
%H/OFFICE-l/D>JOURNAL>F<l8659>T.NLS.<cr><lf> refers to NIC Journal document #18659 (Tenex file <JOURNAL>l8659:NLS):
%H/65/D.ARP061.D.LAD:F.DOCUMENT.<cr><lf> refers to a file ARPO6l:LAD.DOCUMENT at UCLA-CCN. Note the use of multiple Directory fields.
%H[540]D//D>udd>D>Comp=net>D>Map>F(Mail)<cr><lf> refers to file CompNet>Map>Mail at Mit-Multics. Note that the initial NSPD Directory <name> field is empty. This conforms to Multics' method of starting at the top of its directory structure:
I would like to thank Jon Postel, Vint Cerf, Jim White, Charlie Kline, Ken Pogran, Jerry Burchfiel and Tom Boynton for their suggestions.
-5-
