RFC6321

From RFC-Wiki

Internet Engineering Task Force (IETF) C. Daboo Request for Comments: 6321 Apple, Inc. Category: Standards Track M. Douglass ISSN: 2070-1721 RPI

                                                             S. Lees
                                                           Microsoft
                                                         August 2011
               xCal: The XML Format for iCalendar

Abstract

This specification defines "xCal", an XML format for iCalendar data.

Status of This Memo

This is an Internet Standards Track document.

This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741.

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6321.

Copyright Notice

Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Introduction

The iCalendar data format RFC5545 is a widely deployed interchange format for calendaring and scheduling data. While many applications and services consume and generate calendar data, iCalendar is a specialized format that requires its own parser/generator. In contrast, XML-based formats are widely used for interoperability between applications, and the many tools that generate, parse, and manipulate XML make it easier to work with than iCalendar.

The purpose of this specification is to define "xCal", an XML format for iCalendar data. xCal is defined as a straightforward mapping into XML from iCalendar, so that iCalendar data can be converted to XML, and then back to iCalendar, without losing any semantic meaning in the data. Anyone creating xCal calendar data according to this specification will know that their data can be converted to a valid iCalendar representation as well.

Key design considerations are:

  Round-tripping (converting an iCalendar instance to xCal and back)
  will give the same semantic result as the starting point.  That
  is, all components, properties, and property parameters are
  guaranteed to be preserved, with the exception of those that have
  default values.
  xCal preserves the semantics of the iCalendar data.  While a
  simple consumer can easily browse the calendar data in xCal, a
  full understanding of iCalendar is still required in order to
  modify and/or fully comprehend the calendar data.
  xCal has the ability to handle many extensions to the underlying
  iCalendar specification without requiring an update to this
  document.

Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119.

When XML element types in the namespace "urn:ietf:params:xml:ns:icalendar-2.0" are referenced in this document outside of the context of an XML fragment, the string "IC:" will be prefixed to the element types.

Some examples in this document contain "partial" XML documents used for illustrative purposes. In these examples, three periods "..." are used to indicate a portion of the document that has been removed for compactness.

Converting from iCalendar to xCal

This section describes how iCalendar data is converted to xCal using a simple mapping between the iCalendar data model and XML elements.

Pre-Processing

iCalendar uses a line folding mechanism to limit lines of data to a maximum line length (typically 72 characters) to ensure maximum likelihood of preserving data integrity as it is transported via various means (e.g., email) -- see Section 3.1 of RFC5545. Prior to converting iCalendar data into xCal, all folded lines MUST be unfolded.

iCalendar data uses an "escape" character sequence for text values and property parameter values. When such text elements are converted into xCal, the escaping MUST be removed.

iCalendar uses a base64 encoding for binary data. However, it does not restrict the encoding from being applied to non-binary value types. So, the following rules MUST be applied when processing a property with the "ENCODING" property parameter set to "BASE64":

o If the property value type is "BINARY", the base64 encoding MUST

  be preserved.

o If the value type is not "BINARY", the "ENCODING" property

  parameter MUST be removed, and the value MUST be base64 decoded.

When base64 encoding and decoding are used, they MUST conform to Section 4 of RFC4648, which is the base64 method used in RFC5545.

One key difference in the formatting of values used in iCalendar and xCal is that, in xCal, the specification uses date/time and UTC offset values aligned with the syntax of [W3C.REC-xmlschema-2-20041028] to aid with XML processing.

iCalendar Stream (RFC 5545, Section 3.4)

At the top level of the iCalendar object model is an "iCalendar stream". This object encompasses multiple "iCalendar objects". In xCal, the entire stream is contained in the root IC:icalendar XML element.

An iCalendar stream can contain one or more iCalendar objects. Each iCalendar object, delimited by "BEGIN:VCALENDAR" and "END:VCALENDAR", is enclosed by the IC:vcalendar XML element.

Example:

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 <vcalendar>
 ...
 </vcalendar>

</icalendar>

iCalendar objects are comprised of a set of "components", "properties", "parameters", and "values". A "component" can contain other "components" or "properties". A "property" has a value and a set of zero or more "parameters".

In xCal, component elements, for example, IC:vevent and IC:vtodo, are contained within an IC:components XML element. Within the component element, another IC:components element could appear (representing components nested within components) or the IC:properties XML element could appear. IC:properties is used to encapsulate iCalendar properties.

Each iCalendar property will be mapped to its own XML element as described below. Within each of these elements, there is zero or one IC:parameters XML element used to encapsulate any iCalendar property parameters. Additionally there will be one or more XML elements representing the value of the iCalendar property.

Example:

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 <vcalendar>
   <properties>
   ...
   </properties>
   <components>
   ...
   </components>
 </vcalendar>

</icalendar>

      +------------------+--------------+------------------+
      | Item             | XML element  | XML Definition   |
      +------------------+--------------+------------------+
      | iCalendar Stream | IC:icalendar | Appendix A # 3.4 |
      | VCALENDAR        | IC:vcalendar | Appendix A # 3.6 |
      +------------------+--------------+------------------+

Components (RFC 5545, Section 3.6)

Each calendar component in the "VCALENDAR" object, delimited by "BEGIN" and "END", will be converted to an enclosing XML element with the same name, but in lowercase. As an example, the table below shows iCalendar-to-xCal mappings for current iCalendar components. Any new iCalendar components added in the future will be converted in the same way.

         +-----------+--------------+--------------------+
         | Component | XML element  | XML Definition     |
         +-----------+--------------+--------------------+
         | VEVENT    | IC:vevent    | Appendix A # 3.6.1 |
         | VTODO     | IC:vtodo     | Appendix A # 3.6.2 |
         | VJOURNAL  | IC:vjournal  | Appendix A # 3.6.3 |
         | VFREEBUSY | IC:vfreebusy | Appendix A # 3.6.4 |
         | VTIMEZONE | IC:vtimezone | Appendix A # 3.6.5 |
         | STANDARD  | IC:standard  | Appendix A # 3.6.5 |
         | DAYLIGHT  | IC:daylight  | Appendix A # 3.6.5 |
         | VALARM    | IC:valarm    | Appendix A # 3.6.6 |
         +-----------+--------------+--------------------+

Properties (RFC 5545, Sections 3.7 and 3.8)

iCalendar properties, whether they apply to the "VCALENDAR" object or to a component, are handled in a consistent way in the xCal format.

iCalendar properties are enclosed in the XML element IC:properties.

Each individual iCalendar property is represented in xCal by an element of the same name as the iCalendar property, but in lowercase. For example, the "CALSCALE" property is represented in xCal by the IC:calscale element.

Example:

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 <vcalendar>
   <properties>
     <calscale>...</calscale>
     <version>...</version>
     <prodid>...</prodid>
   </properties>
   <components>
   ...
   </components>
 </vcalendar>

</icalendar>

Each property can contain an IC:parameters XML element encapsulating any iCalendar property parameters associated with the iCalendar property.

Each property will contain one or more "value" XML elements as described below representing the value of the iCalendar property.

As an example, the table below shows iCalendar-to-xCal mappings for current iCalendar properties. Any new iCalendar properties added in the future will be converted in the same way.

+------------------+---------------------+-----------------------+
| Property         | XML element         | XML Definition        |
+------------------+---------------------+-----------------------+
| CALSCALE         | IC:calscale         | Appendix A # 3.7.1    |
| METHOD           | IC:method           | Appendix A # 3.7.2    |
| PRODID           | IC:prodid           | Appendix A # 3.7.3    |
| VERSION          | IC:version          | Appendix A # 3.7.4    |
| ATTACH           | IC:attach           | Appendix A # 3.8.1.1  |
| CATEGORIES       | IC:categories       | Appendix A # 3.8.1.2  |
| CLASS            | IC:class            | Appendix A # 3.8.1.3  |
| COMMENT          | IC:comment          | Appendix A # 3.8.1.4  |
| DESCRIPTION      | IC:description      | Appendix A # 3.8.1.5  |
| GEO              | IC:geo              | Appendix A # 3.8.1.6  |
| LOCATION         | IC:location         | Appendix A # 3.8.1.7  |
| PERCENT-COMPLETE | IC:percent-complete | Appendix A # 3.8.1.8  |
| PRIORITY         | IC:priority         | Appendix A # 3.8.1.9  |
| RESOURCES        | IC:resources        | Appendix A # 3.8.1.10 |
| STATUS           | IC:status           | Appendix A # 3.8.1.11 |
| SUMMARY          | IC:summary          | Appendix A # 3.8.1.12 |
| COMPLETED        | IC:completed        | Appendix A # 3.8.2.1  |
| DTEND            | IC:dtend            | Appendix A # 3.8.2.2  |
| DUE              | IC:due              | Appendix A # 3.8.2.3  |
| DTSTART          | IC:dtstart          | Appendix A # 3.8.2.4  |
| DURATION         | IC:duration         | Appendix A # 3.8.2.5  |
| FREEBUSY         | IC:freebusy         | Appendix A # 3.8.2.6  |
| TRANSP           | IC:transp           | Appendix A # 3.8.2.7  |
| TZID             | IC:tzid             | Appendix A # 3.8.3.1  |
| TZNAME           | IC:tzname           | Appendix A # 3.8.3.2  |
| TZOFFSETFROM     | IC:tzoffsetfrom     | Appendix A # 3.8.3.3  |
| TZOFFSETTO       | IC:tzoffsetto       | Appendix A # 3.8.3.4  |
| TZURL            | IC:tzurl            | Appendix A # 3.8.3.5  |
| ATTENDEE         | IC:attendee         | Appendix A # 3.8.4.1  |
| CONTACT          | IC:contact          | Appendix A # 3.8.4.2  |
| ORGANIZER        | IC:organizer        | Appendix A # 3.8.4.3  |
| RECURRENCE-ID    | IC:recurrence-id    | Appendix A # 3.8.4.4  |
| RELATED-TO       | IC:related-to       | Appendix A # 3.8.4.5  |
| URL              | IC:url              | Appendix A # 3.8.4.6  |
| UID              | IC:uid              | Appendix A # 3.8.4.7  |
| EXDATE           | IC:exdate           | Appendix A # 3.8.5.1  |
| RDATE            | IC:rdate            | Appendix A # 3.8.5.2  |
| RRULE            | IC:rrule            | Appendix A # 3.8.5.3  |
| ACTION           | IC:action           | Appendix A # 3.8.6.1  |
| REPEAT           | IC:repeat           | Appendix A # 3.8.6.2  |
| TRIGGER          | IC:trigger          | Appendix A # 3.8.6.3  |
| CREATED          | IC:created          | Appendix A # 3.8.7.1  |
| DTSTAMP          | IC:dtstamp          | Appendix A # 3.8.7.2  |
| LAST-MODIFIED    | IC:last-modified    | Appendix A # 3.8.7.3  |
| SEQUENCE         | IC:sequence         | Appendix A # 3.8.7.4  |
| REQUEST-STATUS   | IC:request-status   | Appendix A # 3.8.8.3  |
+------------------+---------------------+-----------------------+

Special Cases for Properties

This section describes some properties that have special handling when converting to xCal.

Multi-Valued Properties

The following iCalendar properties can have values that consist of a list of "standard" iCalendar values separated by a specific delimiter. In xCal, these properties are represented by an XML element that contains multiple "value" elements (Section 3.6).

      +------------+---------------+-----------------------+
      | Property   | XML element   | XML Definition        |
      +------------+---------------+-----------------------+
      | CATEGORIES | IC:categories | Appendix A # 3.8.1.2  |
      | RESOURCES  | IC:resources  | Appendix A # 3.8.1.10 |
      | FREEBUSY   | IC:freebusy   | Appendix A # 3.8.2.6  |
      | EXDATE     | IC:exdate     | Appendix A # 3.8.5.1  |
      | RDATE      | IC:rdate      | Appendix A # 3.8.5.2  |
      +------------+---------------+-----------------------+
GEO Property

In iCalendar, the "GEO" property value is defined as a semicolon- separated list of two "FLOAT" values; the first representing latitude and the second longitude.

In xCal, the value for the IC:geo element is represented by two XML elements. These are an IC:latitude element and an IC:longitude element, each of which contains float values. See Appendix A # 3.8.1.6.

Example:

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 ...
 <geo>
   <latitude>37.386013</latitude>
   <longitude>-122.082932</longitude>
 </geo>
 ...

</icalendar>

REQUEST-STATUS Property

In iCalendar, the "REQUEST-STATUS" property value is defined as a semicolon-separated list of two or three "TEXT" values. The first represents a code, the second a description, and the third any additional data.

In xCal, the value for the IC:request-status element is represented by two or three XML elements. These are an IC:code element, an IC: description element, and an IC:data element, each of which contains the corresponding "TEXT" values. If there is no additional data in the iCalendar value, the IC:data element (which would be empty) SHOULD NOT be present. See Appendix A # 3.8.8.3.

Example:

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 ...
 <request-status>
   2.0
   <description>Success</description>
 </request-status>
 ...

</icalendar>

Parameters (RFC 5545, Section 3.2)

iCalendar property parameters are enclosed in the XML element IC: parameters, which occurs in each property XML element. If there are no iCalendar property parameters, the IC:parameters element (which would be empty) SHOULD NOT be present.

Each individual iCalendar property parameter is represented in xCal by an element of the same name as the iCalendar property parameter, but in lowercase. For example, the "PARTSTAT" property parameter is represented in xCal by the IC:partstat element.

Example:

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 <vcalendar>
   ...
   <components>
     ...
     <attendee>
       <parameters>
         <partstat><text>NEEDS-ACTION</text></partstat>
       </parameters>
       ...
     </attendee>
     ...
   </components>
 </vcalendar>

</icalendar>

Each XML parameter element contains one or more child XML elements representing iCalendar value types.

As an example, the table below shows iCalendar-to-xCal mappings for current iCalendar parameters. Any new iCalendar parameters added in the future will be converted in the same way.

   +----------------+-------------------+---------------------+
   | Parameter      | XML element       | XML Definition      |
   +----------------+-------------------+---------------------+
   | ALTREP         | IC:altrep         | Appendix A # 3.2.1  |
   | CN             | IC:cn             | Appendix A # 3.2.2  |
   | CUTYPE         | IC:cutype         | Appendix A # 3.2.3  |
   | DELEGATED-FROM | IC:delegated-from | Appendix A # 3.2.4  |
   | DELEGATED-TO   | IC:delegated-to   | Appendix A # 3.2.5  |
   | DIR            | IC:dir            | Appendix A # 3.2.6  |
   | ENCODING       | IC:encoding       | Appendix A # 3.2.7  |
   | FMTTYPE        | IC:fmttype        | Appendix A # 3.2.8  |
   | FBTYPE         | IC:fbtype         | Appendix A # 3.2.9  |
   | LANGUAGE       | IC:language       | Appendix A # 3.2.10 |
   | MEMBER         | IC:member         | Appendix A # 3.2.11 |
   | PARTSTAT       | IC:partstat       | Appendix A # 3.2.12 |
   | RANGE          | IC:range          | Appendix A # 3.2.13 |
   | RELATED        | IC:related        | Appendix A # 3.2.14 |
   | RELTYPE        | IC:reltype        | Appendix A # 3.2.15 |
   | ROLE           | IC:role           | Appendix A # 3.2.16 |
   | RSVP           | IC:rsvp           | Appendix A # 3.2.17 |
   | SENT-BY        | IC:sent-by        | Appendix A # 3.2.18 |
   | TZID           | IC:tzid           | Appendix A # 3.2.19 |
   +----------------+-------------------+---------------------+

VALUE Parameter

iCalendar defines a "VALUE" property parameter (Section 3.2.20 of RFC5545). This property parameter is not mapped to an xCal XML element. Instead, the value type is handled by having different XML elements for each value, and these appear inside of property elements. Thus, when converting from iCalendar to xCal, any "VALUE" property parameters are skipped. When converting from xCal into iCalendar, the appropriate "VALUE" property parameter MUST be included in the iCalendar property if the value type is not the default value type for that property.

Values (RFC 5545, Section 3.3)

In the typical case, iCalendar value types are mapped into XML elements with a matching name in all lowercase. In the case of the value for a recurrence rule (see below), iCalendar defines "structured" values, and these are mapped into separate child elements for each value element.

Binary (RFC 5545, Section 3.3.1)

Description: iCalendar "BINARY" property values are represented by

  the IC:binary XML element.  The content of the element is base64
  encoded data, conforming to Section 4 of RFC4648, which is the
  base64 method used in RFC5545.  Whitespace MAY be inserted into
  the data at any point to "wrap" the data to reasonable line
  lengths.  When converting back to iCalendar, the whitespace MUST
  first be removed.

XML Definition: Appendix A # 3.3.1

Example:

<binary>SGVsbG8gV29ybGQh</binary>

Boolean (RFC 5545, Section 3.3.2)

Description: iCalendar "BOOLEAN" property values are represented by

  the IC:boolean XML element.  The content of the element is a
  boolean value.

XML Definition: Appendix A # 3.3.2

Example:

<boolean>true</boolean>

Calendar User Address (RFC 5545, Section 3.3.3)

Description: iCalendar "CAL-ADDRESS" property values are represented

  by the IC:cal-address XML element.  The content of the element is
  a URI.

XML Definition: Appendix A # 3.3.3

Example:

<cal-address>mailto:[email protected]</cal-address>

Date (RFC 5545, Section 3.3.4)

Description: iCalendar "DATE" property values are represented by the

  IC:date XML element.  The content of the element is the same date
  value specified by RFC5545, with the exception that the date
  components are separated by "-" characters, for consistency with
  [W3C.REC-xmlschema-2-20041028].

XML Definition: Appendix A # 3.3.4

Example:

<date>2011-05-17</date>

Date-Time (RFC 5545, Section 3.3.5)

Description: iCalendar "DATE-TIME" property values are represented

  by the IC:date-time XML element.  The content of the element is
  the same date-time value specified by RFC5545, with the
  exception that the date components are separated by "-"
  characters, and the time components are separated by ":"
  characters, for consistency with [W3C.REC-xmlschema-2-20041028].
  Note that while [W3C.REC-xmlschema-2-20041028] allows for a UTC
  offset to be included in date/time values, xCal does not use that,
  and instead follows the iCalendar behavior of using time zone
  definitions via the "TZID" property parameter.

XML Definition: Appendix A # 3.3.5

Example:

<date-time>2011-05-17T12:00:00</date-time>

Duration (RFC 5545, Section 3.3.6)

Description: iCalendar "DURATION" property values are represented by

  the IC:duration XML element.  The content of the element is the
  same duration value specified by RFC5545.

XML Definition: Appendix A # 3.3.6

Example:

<duration>P1D</duration>

Float (RFC 5545, Section 3.3.7)

Description: iCalendar "FLOAT" property values are represented by

  the IC:float XML element.  The content of the element is a text
  representation of a floating point number.

XML Definition: Appendix A # 3.3.7

Example:

<float>0.5</float>

Integer (RFC 5545, Section 3.3.8)

Description: iCalendar "INTEGER" property values are represented by

  the IC:integer XML element.  The content of the element is a text
  representation of an integer number.

XML Definition: Appendix A # 3.3.8

Examples:

<integer>50</integer> <integer>-100</integer>

Period of Time (RFC 5545, Section 3.3.9)

Description: iCalendar "PERIOD" property values are represented by

  the IC:period XML element.  The content of the element is child
  elements representing the start, end, or duration components of
  the period.

XML Definition: Appendix A # 3.3.9

Example:

<period>

 <start>2011-05-17T12:00:00</start>
 <duration>P1H</duration>

</period>

3.6.10. Recurrence Rule (RFC 5545, Section 3.3.10)

Description: iCalendar "RECUR" property values are represented by

  the IC:recur XML element.  The content of the element is child
  elements representing the various components of a recurrence rule.

XML Definition: Appendix A # 3.3.10

Example:

<recur>

 <freq>YEARLY</freq>
 <count>5</count>
 <byday>-1SU</byday>
 <bymonth>10</bymonth>

</recur>

3.6.11. Text (RFC 5545, Section 3.3.11)

Description: iCalendar "TEXT" property values are represented by the

  IC:text XML element.  The content of the element is simple text.

XML Definition: Appendix A # 3.3.11

Example:

<text>Hello World!</text>

3.6.12. Time (RFC 5545, Section 3.3.12)

Description: iCalendar "TIME" property values are represented by the

  IC:time XML element.  The content of the element is the same time
  value specified by RFC5545, with the exception that the time
  components are separated by ":" characters, for consistency with
  [W3C.REC-xmlschema-2-20041028].  Note that while
  [W3C.REC-xmlschema-2-20041028] allows for a UTC offset to be
  included in date/time values, xCal does not use that, and instead
  follows the iCalendar behavior of using time zone definitions via
  the "TZID" property parameter.

XML Definition: Appendix A # 3.3.12

Example:

3.6.13. URI (RFC 5545, Section 3.3.13)

Description: iCalendar "URI" property values are represented by the

  IC:uri XML element.  The content of the element is a URI.

XML Definition: Appendix A # 3.3.13

Example:

<uri>http://calendar.example.com</uri>

3.6.14. UTC Offset (RFC 5545, Section 3.3.14)

Description: iCalendar "UTC-OFFSET" property values are represented

  by the IC:utc-offset XML element.  The content of the element is
  the same UTC offset value specified by RFC5545, with the
  exception that the hour, minute, and second components are
  separated by a ":" character, for consistency with
  [W3C.REC-xmlschema-2-20041028].

XML Definition: Appendix A # 3.3.14

Example:

<utc-offset>-05:00</utc-offset>

Extensions

iCalendar extension properties and property parameters (those with an "X-" prefix in their name) are handled in the same way as other properties and property parameters: the property or property parameter is represented by an XML element with the same name, but in lowercase, e.g., the "X-FOO" property in iCalendar turns into the IC: x-foo element in xCal. However, see Section 5 for how to deal with default values for unrecognized extension properties or property parameters.

Converting from xCal into iCalendar

When converting component, property, and property parameter values, the names SHOULD be converted to uppercase. Although iCalendar names are case insensitive, common practice is to keep them all uppercase following the actual definitions in RFC5545.

BACKSLASH character encoding and line folding MUST be applied to the resulting iCalendar data as required by RFC5545.

Non-binary value types MUST NOT be base64 encoded.

Converting XML Extensions into iCalendar

XML extensions are converted back to iCalendar in one of two ways, depending on whether the extensions are in the iCalendar XML namespace or in an external namespace.

Extensions that are part of the iCalendar XML namespace MUST have element names that begin with "x-", and will be converted back to the equivalent extension property in iCalendar. For example, the "x-foo" element will convert to the "X-FOO" iCalendar property.

Extensions that are in a namespace other than the iCalendar XML namespace SHOULD be preserved in the iCalendar representation using the "XML" iCalendar property described in Section 4.2. Only those extension elements that are immediate child elements of the IC: properties element are converted, any others are ignored.

The XML Property for iCalendar

This section describes an extension property for iCalendar, as covered in Section 8.2.3 of RFC5545.

Property name: XML

Purpose: To embed extended XML-encoded iCalendar data in the iCalendar format.

Value type: The default value type is "TEXT". The value type can also be set to "BINARY" to indicate base64 encoded content.

Property parameters: IANA, non-standard, inline encoding, and value data type property parameters can be specified on this property.

Conformance: The property can be specified multiple times in any calendar component.

Description: The value of this property is a single XML 1.0 [W3C.REC-xml-20081126] element. The "XML" property MUST NOT be used to contain properties that are already defined in iCalendar. Since all elements in the urn:ietf:params:xml:ns:icalendar-2.0 namespace convert to a well-defined iCalendar object, the elements in this property MUST NOT be in the urn:ietf:params:xml:ns:icalendar-2.0 namespace. The XML element that is the value of this property MUST have an XML namespace declaration.

The default value type for this property is "TEXT", and normal BACKSLASH character encoding rules for that value MUST be applied. Note that the source XML can contain characters not allowed in "TEXT" property values. If this is the case, then the XML data MUST be base64 encoded. As required by RFC5545, the "ENCODING" property parameter MUST be present and set to "BASE64", and the "VALUE" property parameter MUST be present and set to "BINARY".

The ordering of "XML" properties is not preserved in the conversion between xCal and iCalendar.

Format definition: This property is defined by the following notation:

xml = "XML" xmlparam ( ":" text ) /

            (
              ";" "ENCODING" "=" "BASE64"
              ";" "VALUE" "=" "BINARY"
              ":" binary
            )
            CRLF

xmlparam = *(";" other-param)

Example: The following is an example of a location embedded in KML markup inside the "XML" property.

XML:<kml xmlns="http://www.opengis.net/kml/2.2">\n

  <Document>\n
    <name>KML Sample</name>\n
    <open>1</open>\n
    <description>An incomplete example of a KML docum
ent - used as an example!</description>\n
  </Document>\n
</kml>

Handling Unrecognized Properties or Parameters

In iCalendar, properties have a default value type specified by their definition, e.g., "SUMMARY"'s value type is "TEXT" and "DURATION"'s is "DURATION". When a property uses its default value type, the "VALUE" property parameter does not need to be specified on the property.

When new properties are defined or "X-" properties are used, an iCalendar<->xCal converter might not recognize them, and know what the appropriate default value types are, yet they need to be able to preserve the values. A similar issue arises for unrecognized property parameters. As a result, the following rules are applied when dealing with unrecognized properties and property parameters:

o When converting iCalendar into xCal:

  *  Any property that does not include a "VALUE" property parameter
     and whose default value type is not known MUST be converted
     using the value type XML element IC:unknown.  The content of
     that element is the unprocessed value text.
  *  Any unrecognized property parameter MUST be converted using the
     value type XML element IC:unknown, with its content set to the
     property parameter value text, treated as if it were a "TEXT"
     value or list of "TEXT" values.

o When converting xCal into iCalendar:

  *  Any IC:unknown property value XML elements are converted
     directly into iCalendar values.  The containing property MUST
     NOT have a "VALUE" property parameter.
  *  Any IC:unknown parameter value XML elements are converted as if
     they were IC:text value type XML elements.

Example: The following is an example of an unrecognized iCalendar property (that uses a "DATE-TIME" value as its default) and the equivalent xCal representation of that property.

iCalendar:

X-PROPERTY:20110512T120000Z

xCal:

<x-property>

 <unknown>20110512T120000Z</unknown>

</x-property>

Example: The following is an example of an unrecognized iCalendar property parameter (that uses a "DURATION" value as its default) specified on a recognized iCalendar property, and the equivalent xCal representation of that property and property parameter.

iCalendar:

DTSTART;X-PARAM=PT30M:20110512T130000Z

xCal:

<dtstart>

 <parameters>
   <x-param><unknown>PT30M</unknown></x-param>
 </parameters>
 <date-time>2011-05-12T13:00:00Z</date-time>

</dtstart>

Security Considerations

For security considerations specific to calendar data, see Section 7 of RFC5545. Since this specification is a mapping from iCalendar, no new security concerns are introduced related to calendar data.

The use of XML as a format does have security risks. Section 7 of RFC3470 discusses these risks. See also the security discussion for the application/xml type in RFC3023.

IANA Considerations

This document defines a new URN to identify a new XML namespace for iCalendar data. The URN conforms to a registry mechanism described in RFC3688.

This document defines a new media type. The registration is in Section 7.2.

This document defines a new property for iCalendar. The registration is in Section 7.3.

Namespace Registration

Registration request for the iCalendar namespace:

URI: urn:ietf:params:xml:ns:icalendar-2.0

Registrant Contact: See the "Authors' Addresses" section of this document.

XML: None. Namespace URIs do not represent an XML specification.

Media Type

This section defines the MIME media type for use with iCalendar in XML data.

Type name: application

Subtype name: calendar+xml

Required parameters: None

Optional parameters: method, component, and optinfo as defined for

  the text/calendar media type in RFC5545; charset as defined for
  application/xml in RFC3023; per RFC3023, use of the charset
  property parameter with the value "utf-8" is STRONGLY RECOMMENDED.

Encoding considerations: Same as encoding considerations of

  application/xml as specified in RFC3023.

Security considerations: See Section 6.

Interoperability considerations: This media type provides an

  alternative format for iCalendar data based on XML.

Published specification: This specification.

Applications that use this media type: Applications that currently

  make use of the text/calendar media type can use this as an
  alternative.

Additional information:

  Magic number(s):  None
  File extension(s):  xcs
  Macintosh file type code(s):  None specified.

Person & email address to contact for further information:

  [email protected]

Intended usage: COMMON

Restrictions on usage: There are no restrictions on where this media

  type can be used.

Author: See the "Authors' Addresses" section of this document.

Change controller: IETF

iCalendar Property Registrations

This document defines the following new iCalendar property to be added to the registry defined in Section 8.2.3 of RFC5545:

          +----------+---------+-----------------------+
          | Property | Status  | Reference             |
          +----------+---------+-----------------------+
          | XML      | Current | RFC 6321, Section 4.2 |
          +----------+---------+-----------------------+

Acknowledgments

The authors would like to thank the following for their valuable contributions: Toby Considine, Bernard Desruisseaux, Keith Moore, Filip Navara, Simon Perreault, Arnaud Quillaud, Peter Saint-Andre, and Dave Thewlis. This specification originated from the work of the XML technical committee of the Calendaring and Scheduling Consortium.

References

Normative References

RFC2119 Bradner, S., "Key words for use in RFCs to Indicate

          Requirement Levels", BCP 14, RFC 2119, March 1997.

RFC3023 Murata, M., St. Laurent, S., and D. Kohn, "XML Media

          Types", RFC 3023, January 2001.

RFC3470 Hollenbeck, S., Rose, M., and L. Masinter, "Guidelines for

          the Use of Extensible Markup Language (XML)
          within IETF Protocols", BCP 70, RFC 3470, January 2003.

RFC3688 Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,

          January 2004.

RFC4648 Josefsson, S., "The Base16, Base32, and Base64 Data

          Encodings", RFC 4648, October 2006.

RFC5545 Desruisseaux, B., "Internet Calendaring and Scheduling

          Core Object Specification (iCalendar)", RFC 5545,
          September 2009.

[W3C.REC-xml-20081126]

          Sperberg-McQueen, C., Yergeau, F., Bray, T., Paoli, J.,
          and E. Maler, "Extensible Markup Language (XML) 1.0 (Fifth
          Edition)", World Wide Web Consortium Recommendation REC-
          xml-20081126, November 2008,
          <http://www.w3.org/TR/2008/REC-xml-20081126>.

Informative References

[W3C.REC-xmlschema-2-20041028]

          Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes
          Second Edition", World Wide Web Consortium
          Recommendation REC-xmlschema-2-20041028, October 2004,
          <http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.

Appendix A. RELAX NG Schema

Below is a RELAX NG schema for iCalendar in XML. The schema is non- normative and given for reference only.

This schema uses the compact notation of RELAX NG. The numeric section numbers given in the comments refer to sections in RFC5545. The ordering of elements follows the section ordering of RFC5545.

The RELAX NG compact notation "?" operator is used to indicate an unordered list of items. However, that operator, as defined, allows "mixing" each element that it operates on at any depth within the other elements, rather than just allowing "mixing" of siblings only. As a result, the schema provided allows certain constructs that are not allowed in iCalendar. Given that there is no sibling-only unordered list operator in RELAX NG, this is the best representation that can be given.

Patterns for date/time, duration, and UTC offset values are given because those differ from the values used in iCalendar. More restrictive schema with patterns and numerical limits could be derived from the example schema here if more comprehensive schema validation is required.

  1. RELAX NG Schema for iCalendar in XML

default namespace = "urn:ietf:params:xml:ns:icalendar-2.0"

  1. 3.2 Property Parameters
  1. 3.2.1 Alternate Text Representation

altrepparam = element altrep {

   value-uri

}

  1. 3.2.2 Common Name

cnparam = element cn {

   value-text

}

  1. 3.2.3 Calendar User Type

cutypeparam = element cutype {

   element text {
       "INDIVIDUAL" |
       "GROUP" |
       "RESOURCE" |
       "ROOM" |
       "UNKNOWN"
   }

}

  1. 3.2.4 Delegators

delfromparam = element delegated-from {

   value-cal-address+

}

  1. 3.2.5 Delegatees

deltoparam = element delegated-to {

   value-cal-address+

}

  1. 3.2.6 Directory Entry Reference

dirparam = element dir {

   value-uri

}

  1. 3.2.7 Inline Encoding

encodingparam = element encoding {

   element text {
       "8BIT" |
       "BASE64"
   }

}

  1. 3.2.8 Format Type

fmttypeparam = element fmttype {

   value-text

}

  1. 3.2.9 Free/Busy Time Type

fbtypeparam = element fbtype {

   element text {
       "FREE" |
       "BUSY" |
       "BUSY-UNAVAILABLE" |
       "BUSY-TENTATIVE"
   }

}

  1. 3.2.10 Language

languageparam = element language {

   value-text

}

  1. 3.2.11 Group or List Membership

memberparam = element member {

   value-cal-address+

}

  1. 3.2.12 Participation Status

partstatparam = element partstat {

   type-partstat-event |
   type-partstat-todo |
   type-partstat-jour

}

type-partstat-event = (

   element text {
       "NEEDS-ACTION" |
       "ACCEPTED" |
       "DECLINED" |
       "TENTATIVE" |
       "DELEGATED"
   }

)

type-partstat-todo = (

   element text {
       "NEEDS-ACTION" |
       "ACCEPTED" |
       "DECLINED" |
       "TENTATIVE" |
       "DELEGATED" |
       "COMPLETED" |
       "IN-PROCESS"
   }

)

type-partstat-jour = (

   element text {
       "NEEDS-ACTION" |
       "ACCEPTED" |
       "DECLINED"
   }

)

  1. 3.2.13 Recurrence Identifier Range

rangeparam = element range {

   element text {
       "THISANDFUTURE"
   }

}

  1. 3.2.14 Alarm Trigger Relationship

trigrelparam = element related {

   element text {
       "START" |
       "END"
   }

}

  1. 3.2.15 Relationship Type

reltypeparam = element reltype {

   element text {
       "PARENT" |
       "CHILD" |
       "SIBLING"
   }

}

  1. 3.2.16 Participation Role

roleparam = element role {

   element text {
       "CHAIR" |
       "REQ-PARTICIPANT" |
       "OPT-PARTICIPANT" |
       "NON-PARTICIPANT"
   }

}

  1. 3.2.17 RSVP Expectation

rsvpparam = element rsvp {

   value-boolean

}

  1. 3.2.18 Sent By

sentbyparam = element sent-by {

   value-cal-address

}

  1. 3.2.19 Time Zone Identifier

tzidparam = element tzid {

   value-text

}

  1. 3.3 Property Value Data Types
  1. 3.3.1 BINARY

value-binary = element binary {

   xsd:string

}

  1. 3.3.2 BOOLEAN

value-boolean = element boolean {

   xsd:boolean

}

  1. 3.3.3 CAL-ADDRESS

value-cal-address = element cal-address {

   xsd:anyURI

}

  1. 3.3.4 DATE

pattern-date = xsd:string {

   pattern = "\d\d\d\d-\d\d-\d\d"

}

value-date = element date {

   pattern-date

}

  1. 3.3.5 DATE-TIME

pattern-date-time = xsd:string {

   pattern = "\d\d\d\d-\d\d-\d\dT\d\d:\d\d:\d\dZ?"

}

value-date-time = element date-time {

   pattern-date-time

}

  1. 3.3.6 DURATION

pattern-duration = xsd:string {

   pattern = "(+|-)?P(\d+W)|(\d+D)?"
           ~ "(T(\d+H(\d+M)?(\d+S)?)|"
           ~   "(\d+M(\d+S)?)|"
           ~   "(\d+S))?"

}

value-duration = element duration {

   pattern-duration

}

  1. 3.3.7 FLOAT

value-float = element float {

   xsd:float

}

  1. 3.3.8 INTEGER

value-integer = element integer {

   xsd:integer

}

  1. 3.3.9 PERIOD

value-period = element period {

   element start {
       pattern-date-time
   },
   (
       element end {
           pattern-date-time
       } |
       element duration {
           pattern-duration
       }
   )

}

  1. 3.3.10 RECUR

value-recur = element recur {

   type-freq,
   (type-until | type-count)?,
   element interval {
       xsd:positiveInteger
   }?,
   type-bysecond*,
   type-byminute*,
   type-byhour*,
   type-byday*,
   type-bymonthday*,
   type-byyearday*,
   type-byweekno*,
   type-bymonth*,
   type-bysetpos*,
   element wkst { type-weekday }?

}

type-freq = element freq {

   "SECONDLY" |
   "MINUTELY" |
   "HOURLY"   |
   "DAILY"    |
   "WEEKLY"   |
   "MONTHLY"  |
   "YEARLY"

}

type-until = element until {

   type-date |
   type-date-time

}

type-count = element count {

   xsd:positiveInteger

}

type-bysecond = element bysecond {

   xsd:positiveInteger

}

type-byminute = element byminute {

   xsd:positiveInteger

}

type-byhour = element byhour {

   xsd:positiveInteger

}

type-weekday = (

   "SU" |
   "MO" |
   "TU" |
   "WE" |
   "TH" |
   "FR" |
   "SA"

)

type-byday = element byday {

   xsd:integer?,
   type-weekday

}

type-bymonthday = element bymonthday {

   xsd:integer

}

type-byyearday = element byyearday {

   xsd:integer

}

type-byweekno = element byweekno {

   xsd:integer

}

type-bymonth = element bymonth {

   xsd:positiveInteger

}

type-bysetpos = element bysetpos {

   xsd:integer

}

  1. 3.3.11 TEXT

value-text = element text {

   xsd:string

}

  1. 3.3.12 TIME

pattern-time = xsd:string {

   pattern = "\d\d:\d\d:\d\dZ?"

}

value-time = element time {

   pattern-time

}

  1. 3.3.13 URI

value-uri = element uri {

   xsd:anyURI

}

  1. 3.3.14 UTC-OFFSET

value-utc-offset = element utc-offset {

   xsd:string { pattern = "(+|-)\d\d:\d\d(:\d\d)?" }

}

  1. UNKNOWN

value-unknown = element unknown {

   xsd:string

}

  1. 3.4 iCalendar Stream

start = element icalendar {

   vcalendar+

}

  1. 3.6 Calendar Components

vcalendar = element vcalendar {

   type-calprops,
   type-component

}

type-calprops = element properties {

   property-prodid &
   property-version &
   property-calscale? &
   property-method?

}

type-component = element components {

   (
       component-vevent |
       component-vtodo |
       component-vjournal |
       component-vfreebusy |
       component-vtimezone
   )*

}

  1. 3.6.1 Event Component

component-vevent = element vevent {

   type-eventprop,
   element components {
       component-valarm+
   }?

}

type-eventprop = element properties {

   property-dtstamp &
   property-dtstart &
   property-uid &
   property-class? &
   property-created? &
   property-description? &
   property-geo? &
   property-last-mod? &
   property-location? &
   property-organizer? &
   property-priority? &
   property-seq? &
   property-status-event? &
   property-summary? &
   property-transp? &
   property-url? &
   property-recurid? &
   property-rrule? &
   (property-dtend | property-duration)? &
   property-attach* &
   property-attendee* &
   property-categories* &
   property-comment* &
   property-contact* &
   property-exdate* &
   property-rstatus* &
   property-related* &
   property-resources* &
   property-rdate*

}

  1. 3.6.2 To-do Component

component-vtodo = element vtodo {

   type-todoprop,
   element components {
       component-valarm+
   }?

}

type-todoprop = element properties {

   property-dtstamp &
   property-uid &
   property-class? &
   property-completed? &
   property-created? &
   property-description? &
   property-geo? &
   property-last-mod? &
   property-location? &
   property-organizer? &
   property-percent? &
   property-priority? &
   property-recurid? &
   property-seq? &
   property-status-todo? &
   property-summary? &
   property-url? &
   property-rrule? &
   (
       (property-dtstart?, property-dtend? ) |
       (property-dtstart, property-duration)?
   ) &
   property-attach* &
   property-attendee* &
   property-categories* &
   property-comment* &
   property-contact* &
   property-exdate* &
   property-rstatus* &
   property-related* &
   property-resources* &
   property-rdate*

}

  1. 3.6.3 Journal Component

component-vjournal = element vjournal {

   type-jourprop

}

type-jourprop = element properties {

   property-dtstamp &
   property-uid &
   property-class? &
   property-created? &
   property-dtstart? &
   property-last-mod? &
   property-organizer? &
   property-recurid? &
   property-seq? &
   property-status-jour? &
   property-summary? &
   property-url? &
   property-rrule? &
   property-attach* &
   property-attendee* &
   property-categories* &
   property-comment* &
   property-contact* &
   property-description? &
   property-exdate* &
   property-related* &
   property-rdate* &
   property-rstatus*

}

  1. 3.6.4 Free/Busy Component

component-vfreebusy = element vfreebusy {

   type-fbprop

}

type-fbprop = element properties {

   property-dtstamp &
   property-uid &
   property-contact? &
   property-dtstart? &
   property-dtend? &
   property-duration? &
   property-organizer? &
   property-url? &
   property-attendee* &
   property-comment* &
   property-freebusy* &
   property-rstatus*

}

  1. 3.6.5 Time Zone Component

component-vtimezone = element vtimezone {

   element properties {
       property-tzid &
       property-last-mod? &
       property-tzuurl?
   },
   element components {
       (component-standard | component-daylight) &
       component-standard* &
       component-daylight*
   }

}

component-standard = element standard {

   type-tzprop

}

component-daylight = element daylight {

   type-tzprop

}

type-tzprop = element properties {

   property-dtstart &
   property-tzoffsetto &
   property-tzoffsetfrom &
   property-rrule? &
   property-comment* &
   property-rdate* &
   property-tzname*

}

  1. 3.6.6 Alarm Component

component-valarm = element valarm {

   audioprop | dispprop | emailprop

}

type-audioprop = element properties {

   property-action &
   property-trigger &
   (property-duration, property-repeat)? &
   property-attach?

}

type-dispprop = element properties {

   property-action &
   property-description &
   property-trigger &
   property-summary &
   property-attendee+ &
   (property-duration, property-repeat)? &
   property-attach*

}

type-emailprop = element properties {

   property-action &
   property-description &
   property-trigger &
   (property-duration, property-repeat)?

}

  1. 3.7 Calendar Properties
  1. 3.7.1 Calendar Scale

property-calscale = element calscale {

   element parameters { empty }?,
   element text { "GREGORIAN" }

}

  1. 3.7.2 Method

property-method = element method {

   element parameters { empty }?,
   value-text

}

  1. 3.7.3 Product Identifier

property-prodid = element prodid {

   element parameters { empty }?,
   value-text

}

  1. 3.7.4 Version

property-version = element version {

   element parameters { empty }?,
   element text { "2.0" }

}

  1. 3.8 Component Properties
  1. 3.8.1 Descriptive Component Properties
  1. 3.8.1.1 Attachment

property-attach = element attach {

   element parameters {
       fmttypeparam? &
       encodingparam?
   }?,
   value-uri | value-binary

}

  1. 3.8.1.2 Categories

property-categories = element categories {

   element parameters {
       languageparam? &
   }?,
   value-text+

}

  1. 3.8.1.3 Classification

property-class = element class {

   element parameters { empty }?,
   element text {
       "PUBLIC" |
       "PRIVATE" |
       "CONFIDENTIAL"
   }

}

  1. 3.8.1.4 Comment

property-comment = element comment {

   element parameters {
       altrepparam? &
       languageparam?
   }?,
   value-text

}

  1. 3.8.1.5 Description

property-description = element description {

   element parameters {
       altrepparam? &
       languageparam?
   }?,
   value-text

}

  1. 3.8.1.6 Geographic Position

property-geo = element geo {

   element parameters { empty }?,
   element latitude  { xsd:float },
   element longitude { xsd:float }

}

  1. 3.8.1.7 Location

property-location = element location {

   element parameters {
       altrepparam? &
       languageparam?
   }?,
   value-text

}

  1. 3.8.1.8 Percent Complete

property-percent = element percent-complete {

   element parameters { empty }?,
   value-integer

}

  1. 3.8.1.9 Priority

property-priority = element priority {

   element parameters { empty }?,
   value-integer

}

  1. 3.8.1.10 Resources

property-resources = element resources {

   element parameters {
       altrepparam? &
       languageparam?
   }?,
   value-text+

}

  1. 3.8.1.11 Status

property-status-event = element status {

   element parameters { empty }?,
   element text {
       "TENTATIVE" |
       "CONFIRMED" |
       "CANCELLED"
   }

}

property-status-todo = element status {

   element parameters { empty }?,
   element text {
       "NEEDS-ACTION" |
       "COMPLETED" |
       "IN-PROCESS" |
       "CANCELLED"
   }

}

property-status-jour = element status {

   element parameters { empty }?,
   element text {
       "DRAFT" |
       "FINAL" |
       "CANCELLED"
   }

}

  1. 3.8.1.12 Summary

property-summary = element summary {

   element parameters {
       altrepparam? &
       languageparam?
   }?,
   value-text

}

  1. 3.8.2 Date and Time Component Properties
  1. 3.8.2.1 Date/Time Completed

property-completed = element completed {

   element parameters { empty }?,
   value-date-time

}

  1. 3.8.2.2 Date/Time End

property-dtend = element dtend {

   element parameters {
       tzidparam?
   }?,
   value-date-time |
   value-date

}

  1. 3.8.2.3 Date/Time Due

property-due = element due {

   element parameters {
       tzidparam?
   }?,
   value-date-time |
   value-date

}

  1. 3.8.2.4 Date/Time Start

property-dtstart = element dtstart {

   element parameters {
       tzidparam?
   }?,
   value-date-time |
   value-date

}

  1. 3.8.2.5 Duration

property-duration = element duration {

   element parameters { empty }?,
   value-duration

}

  1. 3.8.2.6 Free/Busy Time

property-freebusy = element freebusy {

   element parameters {
       fbtypeparam?
   }?,
   value-period+

}

  1. 3.8.2.7 Time Transparency

property-transp = element transp {

   element parameters { empty }?,
   element text {
       "OPAQUE" |
       "TRANSPARENT"
   }

}

  1. 3.8.3 Time Zone Component Properties
  1. 3.8.3.1 Time Zone Identifier

property-tzid = element tzid {

   element parameters { empty }?,
   value-text

}

  1. 3.8.3.2 Time Zone Name

property-tzname = element tzname {

   element parameters {
       languageparam?
   }?,
   value-text

}

  1. 3.8.3.3 Time Zone Offset From

property-tzoffsetfrom = element tzoffsetfrom {

   element parameters { empty }?,
   value-utc-offset

}

  1. 3.8.3.4 Time Zone Offset To

property-tzoffsetto = element tzoffsetto {

   element parameters { empty }?,
   value-utc-offset

}

  1. 3.8.3.5 Time Zone URL

property-tzurl = element tzurl {

   element parameters { empty }?,
   value-uri

}

  1. 3.8.4 Relationship Component Properties
  1. 3.8.4.1 Attendee

property-attendee = element attendee {

   element parameters {
       cutypeparam? &
       memberparam? &
       roleparam? &
       partstatparam? &
       rsvpparam? &
       deltoparam? &
       delfromparam? &
       sentbyparam? &
       cnparam? &
       dirparam? &
       languageparam?
   }?,
   value-cal-address

}

  1. 3.8.4.2 Contact

property-contact = element contact {

   element parameters {
       altrepparam? &
       languageparam?
   }?,
   value-text

}

  1. 3.8.4.3 Organizer

property-organizer = element organizer {

   element parameters {
       cnparam? &
       dirparam? &
       sentbyparam? &
       languageparam?
   }?,
   value-cal-address

}

  1. 3.8.4.4 Recurrence ID

property-recurid = element recurrence-id {

   element parameters {
       tzidparam? &
       rangeparam?
   }?,
   value-date-time |
   value-date

}

  1. 3.8.4.5 Related-To

property-related = element related-to {

   element parameters {
       reltypeparam?
   }?,
   value-text

}

  1. 3.8.4.6 Uniform Resource Locator

property-url = element url {

   element parameters { empty }?,
   value-uri

}

  1. 3.8.4.7 Unique Identifier

property-uid = element uid {

   element parameters { empty }?,
   value-text

}

  1. 3.8.5 Recurrence Component Properties
  1. 3.8.5.1 Exception Date/Times

property-exdate = element exdate {

   element parameters {
       tzidparam?
   }?,
   value-date-time+ |
   value-date+

}

  1. 3.8.5.2 Recurrence Date/Times

property-rdate = element rdate {

   element parameters {
       tzidparam?
   }?,
   value-date-time+ |
   value-date+ |
   value-period+

}

  1. 3.8.5.3 Recurrence Rule

property-rrule = element rrule {

   element parameters { empty }?,
   value-recur

}

  1. 3.8.6 Alarm Component Properties
  1. 3.8.6.1 Action

property-action = element action {

   element parameters { empty }?,
   element text {
       "AUDIO" |
       "DISPLAY" |
       "EMAIL"
   }

}

  1. 3.8.6.2 Repeat Count

property-repeat = element repeat {

   element parameters { empty }?,
   value-integer

}

  1. 3.8.6.3 Trigger

property-trigger = element trigger {

   (
       element parameters {
           trigrelparam?
       }?,
       value-duration
   ) |
   (
       element parameters { empty }?,
       value-date-time
   )

}

  1. 3.8.7 Change Management Component Properties
  1. 3.8.7.1 Date/Time Created

property-created = element created {

   element parameters { empty }?,
   value-date-time

}

  1. 3.8.7.2 Date/Time Stamp

property-dtstamp = element dtstamp {

   element parameters { empty }?,
   value-date-time

}

  1. 3.8.7.3 Last Modified

property-last-mod = element last-modified {

   element parameters { empty }?,
   value-date-time

}

  1. 3.8.7.4 Sequence Number

property-seq = element sequence {

   element parameters { empty }?,
   value-integer

}

  1. 3.8.8 Miscellaneous Component Properties
  1. 3.8.8.3 Request Status

property-rstatus = element request-status {

   element parameters {
       languageparam?
   }?,
   element code { xsd:string },
   element description { xsd:string },
   element data { xsd:string }?

}

Appendix B. Examples

This section contains two examples of iCalendar objects with their xCal representation.

B.1. Example 1

B.1.1. iCalendar Data

BEGIN:VCALENDAR CALSCALE:GREGORIAN PRODID:-//Example Inc.//Example Calendar//EN VERSION:2.0 BEGIN:VEVENT DTSTAMP:20080205T191224Z DTSTART:20081006 SUMMARY:Planning meeting UID:4088E990AD89CB3DBB484909 END:VEVENT END:VCALENDAR

B.1.2. XML Data

<?xml version="1.0" encoding="utf-8"?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

<vcalendar>
 <properties>
  <calscale>
    <text>GREGORIAN</text>
  </calscale>
  <prodid>
   <text>-//Example Inc.//Example Calendar//EN</text>
  </prodid>
  <version>
    <text>2.0</text>
  </version>
 </properties>
 <components>
  <vevent>
   <properties>
    <dtstamp>
      <date-time>2008-02-05T19:12:24Z</date-time>
    </dtstamp>
    <dtstart>
      <date>2008-10-06</date>
    </dtstart>
    <summary>
     <text>Planning meeting</text>
    </summary>
    <uid>
     <text>4088E990AD89CB3DBB484909</text>
    </uid>
   </properties>
  </vevent>
 </components>
</vcalendar>

</icalendar>

B.2. Example 2

B.2.1. iCalendar Data

VERSION:2.0 PRODID:-//Example Corp.//Example Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060102T120000 DURATION:PT1H RRULE:FREQ=DAILY;COUNT=5 RDATE;TZID=US/Eastern;VALUE=PERIOD:20060102T150000/PT2H SUMMARY:Event #2 DESCRIPTION:We are having a meeting all this week at 12 pm fo

r one hour\, with an additional meeting on the first day 2 h
ours long.\nPlease bring your own lunch for the 12 pm meetin
gs.

UID:[email protected] END:VEVENT BEGIN:VEVENT

DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060104T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060104T120000 SUMMARY:Event #2 bis UID:[email protected] END:VEVENT END:VCALENDAR

B.2.2. XML Data

<?xml version="1.0" encoding="utf-8" ?> <icalendar xmlns="urn:ietf:params:xml:ns:icalendar-2.0">

 <vcalendar>
   <properties>
     <prodid>
       <text>-//Example Inc.//Example Client//EN</text>
     </prodid>
     <version>
       <text>2.0</text>
     </version>
   </properties>
   <components>
     <vtimezone>
       <properties>
         <last-modified>
           <date-time>2004-01-10T03:28:45Z</date-time>
         </last-modified>
         <tzid>US/Eastern</tzid>
       </properties>
       <components>
         <daylight>
           <properties>
             <dtstart>
               <date-time>2000-04-04T02:00:00</date-time>
             </dtstart>
             <rrule>
               <recur>
                 <freq>YEARLY</freq>
                 <byday>1SU</byday>
                 <bymonth>4</bymonth>
               </recur>
             </rrule>
             <tzname>
               <text>EDT</text>
             </tzname>
             <tzoffsetfrom>
               <utc-offset>-05:00</utc-offset>
             </tzoffsetfrom>
             <tzoffsetto>
               <utc-offset>-04:00</utc-offset>
             </tzoffsetto>
           </properties>
         </daylight>
         <standard>
           <properties>
             <dtstart>
               <date-time>2000-10-26T02:00:00</date-time>
             </dtstart>
             <rrule>
               <recur>
                 <freq>YEARLY</freq>
                 <byday>-1SU</byday>
                 <bymonth>10</bymonth>
               </recur>
             </rrule>
             <tzname>
               <text>EST</text>
             </tzname>
             <tzoffsetfrom>
               <utc-offset>-04:00</utc-offset>
             </tzoffsetfrom>
             <tzoffsetto>
               <utc-offset>-05:00</utc-offset>
             </tzoffsetto>
           </properties>
         </standard>
       </components>
     </vtimezone>
     <vevent>
       <properties>
         <dtstamp>
           <date-time>2006-02-06T00:11:21Z</date-time>
         </dtstamp>
         <dtstart>
           <parameters>
             <tzid><text>US/Eastern</text></tzid>
           </parameters>
           <date-time>2006-01-02T12:00:00</date-time>
         </dtstart>
         <duration>
           <duration>PT1H</duration>
         </duration>
         <rrule>
           <recur>
             <freq>DAILY</freq>
             <count>5</count>
           </recur>
         </rrule>
         <rdate>
           <parameters>
             <tzid><text>US/Eastern</text></tzid>
           </parameters>
           <period>
             <start>2006-01-02T15:00:00</start>
             <duration>PT2H</duration>
           </period>
         </rdate>
         <summary>
           <text>Event #2</text>
         </summary>
         <description>
           <text>We are having a meeting all this week at 12

pm for one hour, with an additional meeting on the first day 2 hours long. Please bring your own lunch for the 12 pm meetings.</text>

         </description>
         <uid>
           <text>[email protected]</text>
         </uid>
       </properties>
     </vevent>
     <vevent>
       <properties>
         <dtstamp>
           <date-time>2006-02-06T00:11:21Z</date-time>
         </dtstamp>
         <dtstart>
           <parameters>
             <tzid><text>US/Eastern</text></tzid>
           </parameters>
           <date-time>2006-01-04T14:00:00</date-time>
         </dtstart>
         <duration>
           <duration>PT1H</duration>
         </duration>
         <recurrence-id>
           <parameters>
             <tzid><text>US/Eastern</text></tzid>
           </parameters>
           <date-time>2006-01-04T12:00:00</date-time>
         </recurrence-id>
         <summary>
           <text>Event #2 bis</text>
         </summary>
         <uid>
           <text>[email protected]</text>
         </uid>
       </properties>
     </vevent>
   </components>
 </vcalendar>

</icalendar>

Authors' Addresses

Cyrus Daboo Apple Inc. 1 Infinite Loop Cupertino, CA 95014 USA

EMail: [email protected] URI: http://www.apple.com/

Mike Douglass Rensselaer Polytechnic Institute 110 8th Street Troy, NY 12180 USA

EMail: [email protected] URI: http://www.rpi.edu/

Steven Lees Microsoft Corporation One Microsoft Way Redmond, WA 98052 USA

EMail: [email protected] URI: http://www.microsoft.com/