RFC7986

From RFC-Wiki

Internet Engineering Task Force (IETF) C. Daboo Request for Comments: 7986 Apple Inc. Updates: 5545 October 2016 Category: Standards Track ISSN: 2070-1721

                  New Properties for iCalendar

Abstract

This document defines a set of new properties for iCalendar data and extends the use of some existing properties to the entire iCalendar object.

Status of This Memo

This is an Internet Standards Track document.

This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc7986.

Copyright Notice

Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Introduction

The iCalendar RFC5545 data format is used to represent calendar data and is used with the iCalendar Transport-Independent Interoperability Protocol (iTIP) RFC5546 to handle scheduling operations between calendar users. iCalendar is in widespread use, and in accordance with provisions in that specification, extension elements have been added by various vendors to the data format in order to support and enhance capabilities. This specification collects a number of these ad hoc extensions and uses the new IANA registry capability defined in RFC5545 to register standard variants with clearly defined definitions and semantics. In addition, some new elements are introduced for features that vendors have recently been requesting.

Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC2119.

The notation used in this memo is the ABNF notation of RFC5234 as used by iCalendar RFC5545. Any syntax elements shown below that are not explicitly defined in this specification come from iCalendar RFC5545.

Backwards-Compatible Extension Properties

iCalendar defines properties that can have different value types indicated by a "VALUE" parameter. The definition of a property specifies a "default" value type that is assumed to be used when no "VALUE" parameter is present. However, this poses a problem to the iCalendar parser/generator software that does not know about the default values for new properties. For example, if a new property "FOO" were defined with a default value type of URI and a URI value with a comma was used, an iCalendar generator not aware of this fact would likely treat the property value as "TEXT" and apply backslash escaping to the comma in the value, effectively making it an invalid URI value.

To avoid this problem, this specification recommends that all properties not defined in RFC5545 always include a "VALUE" parameter if the type is other than "TEXT". That is, in the example above, the "FOO" property would have a "VALUE=URI" parameter. This allows iCalendar parser/generator software to track the correct types of unknown properties.

New properties defined in this specification use the term "no default" in the "Value Type" definition to indicate that the "VALUE" parameter has to be included.

Modifications to Calendar Components

This section details changes to the syntax defined in iCalendar RFC5545. New elements are defined in subsequent sections.

calprops =/ *(

            ;
            ; The following are OPTIONAL,
            ; but MUST NOT occur more than once.
            ;
            uid / last-mod / url /
            refresh / source / color
            ;
            ; The following are OPTIONAL,
            ; and MAY occur more than once.
            ;
            name / description / categories /
            image
            ;
            )

eventprop =/ *(

             ;
             ; The following are OPTIONAL,
             ; but MUST NOT occur more than once.
             ;
             color /
             ;
             ; The following are OPTIONAL,
             ; and MAY occur more than once.
             ;
             conference / image
             ;
             )

todoprop =/ *(

            ;
            ; The following are OPTIONAL,
            ; but MUST NOT occur more than once.
            ;
            color /
            ;
            ; The following are OPTIONAL,
            ; and MAY occur more than once.
            ;
            conference / image
            ;
            )

jourprop =/ *(

            ;
            ; The following are OPTIONAL,
            ; but MUST NOT occur more than once.
            ;
            color /
            ;
            ; The following are OPTIONAL,
            ; and MAY occur more than once.
            ;
            image
            ;
            )

Properties

NAME Property

Property Name: NAME

Purpose: This property specifies the name of the calendar.

Value Type: TEXT

Property Parameters: IANA, non-standard, alternate text

  representation, and language property parameters can be specified
  on this property.

Conformance: This property can be specified multiple times in an

  iCalendar object.  However, each property MUST represent the name
  of the calendar in a different language.

Description: This property is used to specify a name of the

  iCalendar object that can be used by calendar user agents when
  presenting the calendar data to a user.  Whilst a calendar only
  has a single name, multiple language variants can be specified by
  including this property multiple times with different "LANGUAGE"
  parameter values on each.

Format Definition: This property is defined by the following

  notation:

name = "NAME" nameparam ":" text CRLF

nameparam = *(

             ;
             ; The following are OPTIONAL,
             ; but MUST NOT occur more than once.
             ;
             (";" altrepparam) / (";" languageparam) /
             ;
             ; The following is OPTIONAL,
             ; and MAY occur more than once.
             ;
             (";" other-param)
             ;
             )

Example: The following is an example of this property:

NAME:Company Vacation Days

DESCRIPTION Property

This specification modifies the definition of the "DESCRIPTION" property to allow it to be defined in an iCalendar object. The following additions are made to the definition of this property, originally specified in Section 3.8.1.5 of RFC5545.

Purpose: This property specifies the description of the calendar.

Conformance: This property can be specified multiple times in an

  iCalendar object.  However, each property MUST represent the
  description of the calendar in a different language.

Description: This property is used to specify a lengthy textual

  description of the iCalendar object that can be used by calendar
  user agents when describing the nature of the calendar data to a
  user.  Whilst a calendar only has a single description, multiple
  language variants can be specified by including this property
  multiple times with different "LANGUAGE" parameter values on each.

UID Property

This specification modifies the definition of the "UID" property to allow it to be defined in an iCalendar object. The following additions are made to the definition of this property, originally specified in Section 3.8.4.7 of RFC5545.

Purpose: This property specifies the persistent, globally unique

  identifier for the iCalendar object.  This can be used, for
  example, to identify duplicate calendar streams that a client may
  have been given access to.  It can be used in conjunction with the
  "LAST-MODIFIED" property also specified on the "VCALENDAR" object
  to identify the most recent version of a calendar.

Conformance: This property can be specified once in an iCalendar

  object.

The description of the "UID" property in RFC5545 contains some recommendations on how the value can be constructed. In particular, it suggests use of host names, IP addresses, and domain names to construct the value. However, this is no longer considered good practice, particularly from a security and privacy standpoint, since use of such values can leak key information about a calendar user or their client and network environment. This specification updates RFC5545 by stating that "UID" values MUST NOT include any data that might identify a user, host, domain, or any other security- or privacy-sensitive information. It is RECOMMENDED that calendar user agents now generate "UID" values that are hex-encoded random Universally Unique Identifier (UUID) values as defined in Sections 4.4 and 4.5 of RFC4122.

The following is an example of such a property value:

UID:5FC53010-1267-4F8E-BC28-1D7AE55A7C99

Additionally, if calendar user agents choose to use other forms of opaque identifiers for the "UID" value, they MUST have a length less than 255 octets and MUST conform to the "iana-token" ABNF syntax defined in Section 3.1 of RFC5545.

LAST-MODIFIED Property

This specification modifies the definition of the "LAST-MODIFIED" property to allow it to be defined in an iCalendar object. The following additions are made to the definition of this property, originally specified in Section 3.8.7.3 of RFC5545.

Purpose: This property specifies the date and time that the

  information associated with the calendar was last revised.

Conformance: This property can be specified once in an iCalendar

  object.

URL Property

This specification modifies the definition of the "URL" property to allow it to be defined in an iCalendar object. The following additions are made to the definition of this property, originally specified in Section 3.8.4.6 of RFC5545.

Purpose: This property may be used to convey a location where a more

  dynamic rendition of the calendar information can be found.

Conformance: This property can be specified once in an iCalendar

  object.

CATEGORIES Property

This specification modifies the definition of the "CATEGORIES" property to allow it to be defined in an iCalendar object. The following additions are made to the definition of this property, originally specified in Section 3.8.1.2 of RFC5545.

Purpose: This property defines the categories for an entire

  calendar.

Conformance: This property can be specified multiple times in an

  iCalendar object.

Description: When multiple properties are present, the set of

  categories that apply to the iCalendar object are the union of all
  the categories listed in each property value.

REFRESH-INTERVAL Property

Property Name: REFRESH-INTERVAL

Purpose: This property specifies a suggested minimum interval for

  polling for changes of the calendar data from the original source
  of that data.

Value Type: DURATION -- no default

Property Parameters: IANA and non-standard property parameters can

  be specified on this property.

Conformance: This property can be specified once in an iCalendar

  object.

Description: This property specifies a positive duration that gives

  a suggested minimum polling interval for checking for updates to
  the calendar data.  The value of this property SHOULD be used by
  calendar user agents to limit the polling interval for calendar
  data updates to the minimum interval specified.

Format Definition: This property is defined by the following

  notation:

refresh = "REFRESH-INTERVAL" refreshparam

                ":" dur-value CRLF
                ;consisting of a positive duration of time.

refreshparam = *(

               ;
               ; The following is REQUIRED,
               ; but MUST NOT occur more than once.
               ;
               (";" "VALUE" "=" "DURATION") /
               ;
               ; The following is OPTIONAL,
               ; and MAY occur more than once.
               ;
               (";" other-param)
               ;
               )

Example: The following is an example of this property:

REFRESH-INTERVAL;VALUE=DURATION:P1W

SOURCE Property

Property Name: SOURCE

Purpose: This property identifies a URI where calendar data can be

  refreshed from.

Value Type: URI -- no default

Property Parameters: IANA and non-standard property parameters can

  be specified on this property.

Conformance: This property can be specified once in an iCalendar

  object.

Description: This property identifies a location where a client can

  retrieve updated data for the calendar.  Clients SHOULD honor any
  specified "REFRESH-INTERVAL" value when periodically retrieving
  data.  Note that this property differs from the "URL" property in
  that "URL" is meant to provide an alternative representation of
  the calendar data rather than the original location of the data.

Format Definition: This property is defined by the following

  notation:

source = "SOURCE" sourceparam ":" uri CRLF

sourceparam = *(";" other-param)

Example: The following is an example of this property:

SOURCE;VALUE=URI:https://example.com/holidays.ics

COLOR Property

Property Name: COLOR

Purpose: This property specifies a color used for displaying the

  calendar, event, todo, or journal data.

Value Type: TEXT

Property Parameters: IANA and non-standard property parameters can

  be specified on this property.

Conformance: This property can be specified once in an iCalendar

  object or in "VEVENT", "VTODO", or "VJOURNAL" calendar components.

Description: This property specifies a color that clients MAY use

  when presenting the relevant data to a user.  Typically, this
  would appear as the "background" color of events or tasks.  The
  value is a case-insensitive color name taken from the CSS3 set of
  names, defined in Section 4.3 of [W3C.REC-css3-color-20110607].

Format Definition: This property is defined by the following

  notation:

color = "COLOR" colorparam ":" text CRLF

                 ; Value is CSS3 color name

colorparam = *(";" other-param)

Example: The following is an example of this property:

COLOR:turquoise

5.10. IMAGE Property

Property Name: IMAGE

Purpose: This property specifies an image associated with the

  calendar or a calendar component.

Value Type: URI or BINARY -- no default. The value MUST be data

  with a media type of "image" or refer to such data.

Property Parameters: IANA, non-standard, display, inline encoding,

  and value data type property parameters can be specified on this
  property.  The format type parameter can be specified on this
  property and is RECOMMENDED for inline binary-encoded content
  information.

Conformance: This property can be specified multiple times in an

  iCalendar object or in "VEVENT", "VTODO", or "VJOURNAL" calendar
  components.

Description: This property specifies an image for an iCalendar

  object or a calendar component via a URI or directly with inline
  data that can be used by calendar user agents when presenting the
  calendar data to a user.  Multiple properties MAY be used to
  specify alternative sets of images with, for example, varying
  media subtypes, resolutions, or sizes.  When multiple properties
  are present, calendar user agents SHOULD display only one of them,
  picking one that provides the most appropriate image quality, or
  display none.  The "DISPLAY" parameter is used to indicate the
  intended display mode for the image.  The "ALTREP" parameter,
  defined in RFC5545, can be used to provide a "clickable" image
  where the URI in the parameter value can be "launched" by a click
  on the image in the calendar user agent.

Format Definition: This property is defined by the following

  notation:

image = "IMAGE" imageparam

            (
              (
                ";" "VALUE" "=" "URI"
                ":" uri
              ) /
              (
                ";" "ENCODING" "=" "BASE64"
                ";" "VALUE" "=" "BINARY"
                ":" binary
              )
            )
            CRLF

imageparam = *(

             ;
             ; The following is OPTIONAL for a URI value,
             ; RECOMMENDED for a BINARY value,
             ; and MUST NOT occur more than once.
             ;
             (";" fmttypeparam) /
             ;
             ; The following are OPTIONAL,
             ; and MUST NOT occur more than once.
             ;
             (";" altrepparam) / (";" displayparam) /
             ;
             ; The following is OPTIONAL,
             ; and MAY occur more than once.
             ;
             (";" other-param)
             ;
             )

Example: The following is an example of this property:

IMAGE;VALUE=URI;DISPLAY=BADGE;FMTTYPE=image/png:h

ttp://example.com/images/party.png

5.11. CONFERENCE Property

Property Name: CONFERENCE

Purpose: This property specifies information for accessing a

  conferencing system.

Value Type: URI -- no default.

Property Parameters: IANA, non-standard, feature, and label property

  parameters can be specified on this property.

Conformance: This property can be specified multiple times in a

  "VEVENT" or "VTODO" calendar component.

Description: This property specifies information for accessing a

  conferencing system for attendees of a meeting or task.  This
  might be for a telephone-based conference number dial-in with
  access codes included (such as a tel: URI RFC3966 or a sip: or
  sips: URI RFC3261), for a web-based video chat (such as an http:
  or https: URI RFC7230), or for an instant messaging group chat
  room (such as an xmpp: URI RFC5122).  If a specific URI for a
  conferencing system is not available, a data: URI RFC2397
  containing a text description can be used.
  A conference system can be a bidirectional communication channel
  or a uni-directional "broadcast feed".
  The "FEATURE" property parameter is used to describe the key
  capabilities of the conference system to allow a client to choose
  the ones that give the required level of interaction from a set of
  multiple properties.
  The "LABEL" property parameter is used to convey additional
  details on the use of the URI.  For example, the URIs or access
  codes for the moderator and attendee of a teleconference system
  could be different, and the "LABEL" property parameter could be
  used to "tag" each "CONFERENCE" property to indicate which is
  which.
  The "LANGUAGE" property parameter can be used to specify the
  language used for text values used with this property (as per
  Section 3.2.10 of RFC5545).

Format Definition: This property is defined by the following

  notation:

conference = "CONFERENCE" confparam ":" uri CRLF

confparam = *(

             ;
             ; The following is REQUIRED,
             ; but MUST NOT occur more than once.
             ;
             (";" "VALUE" "=" "URI") /
             ;
             ; The following are OPTIONAL,
             ; and MUST NOT occur more than once.
             ;
             (";" featureparam) / (";" labelparam) /
             (";" languageparam ) /
             ;
             ; The following is OPTIONAL,
             ; and MAY occur more than once.
             ;
             (";" other-param)
             ;
             )

Example: The following are examples of this property:

CONFERENCE;VALUE=URI;FEATURE=PHONE,MODERATOR;

LABEL=Moderator dial-in:tel:+1-412-555-0123,,,654321

CONFERENCE;VALUE=URI;FEATURE=PHONE;

LABEL=Attendee dial-in:tel:+1-412-555-0123,,,555123

CONFERENCE;VALUE=URI;FEATURE=PHONE;

LABEL=Attendee dial-in:tel:+1-888-555-0456,,,555123

CONFERENCE;VALUE=URI;FEATURE=CHAT;

LABEL=Chat room:xmpp:[email protected]

CONFERENCE;VALUE=URI;FEATURE=AUDIO,VIDEO;

LABEL=Attendee dial-in:https://chat.example.com/audio?id=123456

Property Parameters

DISPLAY Property Parameter

Parameter Name: DISPLAY

Purpose: To specify different ways in which an image for a calendar

  or component can be displayed.

Format Definition: This property parameter is defined by the

  following notation:

displayparam = "DISPLAY" "=" displayval *("," displayval)

displayval = ("BADGE" / ; image inline with the title of the

                            ; event
              "GRAPHIC" /   ; a full image replacement for the event
                            ; itself
              "FULLSIZE" /  ; an image that is used to enhance the
                            ; event
              "THUMBNAIL" / ; a smaller variant of "FULLSIZE" to be
                            ; used when space for the image is
                            ; constrained
              x-name /      ; Experimental type
              iana-token)   ; Other IANA-registered type
                            ;
                            ; Default is BADGE

Description: This property parameter MAY be specified on "IMAGE"

  properties.  In the absence of this parameter, the default value
  "BADGE" MUST be used.  The value determines how a client ought to
  present an image supplied in iCalendar data to the user.
  Values for this parameter are registered with IANA as per
  Section 9.3.1.  New values can be added to this registry following
  the procedure outlined in Section 8.2.1 of RFC5545.
  Servers and clients MUST handle x-name and iana-token values they
  don't recognize by not displaying any image at all.

Example:

IMAGE;VALUE=URI;DISPLAY=BADGE,THUMBNAIL;FMTTYPE=image/png:https://exa

mple.com/images/weather-cloudy.png

EMAIL Property Parameter

Parameter Name: EMAIL

Purpose: To specify an email address that is used to identify or

  contact an organizer or attendee.

Format Definition: This property parameter is defined by the

  following notation:

emailparam = "EMAIL" "=" param-value

Description: This property parameter MAY be specified on "ORGANIZER"

  or "ATTENDEE" properties.  This property can be used in situations
  where the calendar user address value of the "ORGANIZER" and
  "ATTENDEE" properties is not likely to be an identifier that
  recipients of scheduling messages could use to match the calendar
  user with, for example, an address book entry.  The value of this
  property is an email address that can easily be matched by
  recipients.  Recipients can also use this value as an alternative
  means of contacting the calendar user via email.  If a recipient's
  calendar user agent allows the recipient to save contact
  information based on the "ORGANIZER" or "ATTENDEE" properties,
  those calendar user agents SHOULD use any "EMAIL" property
  parameter value for the email address of the contact over any
  mailto: calendar user address specified as the value of the
  property.  Calendar user agents SHOULD NOT include an "EMAIL"
  property parameter when its value matches the calendar user
  address specified as the value of the property.

Example:

ATTENDEE;CN=Cyrus Daboo;[email protected]:mailto:opaque-toke

[email protected]

FEATURE Property Parameter

Parameter Name: FEATURE

Purpose: To specify a feature or features of a conference or

  broadcast system.

Format Definition: This property parameter is defined by the

  following notation:

featureparam = "FEATURE" "=" featuretext *("," featuretext) featuretext = ("AUDIO" / ; Audio capability

                "CHAT" /      ; Chat or instant messaging
                "FEED" /      ; Blog or Atom feed
                "MODERATOR" / ; Moderator dial-in code
                "PHONE" /     ; Phone conference
                "SCREEN" /    ; Screen sharing
                "VIDEO" /     ; Video capability
                x-name /      ; Experimental type
                iana-token)   ; Other IANA-registered type

Description: This property parameter MAY be specified on the

  "CONFERENCE" property.  Multiple values can be specified.  The
  "MODERATOR" value is used to indicate that the property value is
  specific to the owner/initiator of the conference and contains a
  URI that "activates" the system (e.g., a "moderator" access code
  for a phone conference system that is different from the "regular"
  access code).

Example:

CONFERENCE;VALUE=URI;FEATURE=AUDIO:rtsp://audio.example.com/

event

CONFERENCE;VALUE=URI;FEATURE=AUDIO,VIDEO:https://video-chat.exam

ple.com/;group-id=1234

LABEL Property Parameter

Parameter Name: LABEL

Purpose: To provide a human-readable label.

Format Definition: This property parameter is defined by the

  following notation:

labelparam = "LABEL" "=" param-value

Description: This property parameter MAY be specified on the

  "CONFERENCE" property.  It is anticipated that other extensions to
  iCalendar will reuse this property parameter on new properties
  that they define.  As a result, clients MUST expect to find this
  property parameter present on many different properties.  It
  provides a human-readable label that can be presented to calendar
  users to allow them to discriminate between properties that might
  be similar or provide additional information for properties that
  are not self-describing.  The "LANGUAGE" property parameter can be
  used to specify the language of the text in the parameter value
  (as per Section 3.2.10 of RFC5545).

Example:

CONFERENCE;VALUE=URI;FEATURE=VIDEO;

LABEL="Web video chat, access code=76543";
:https://video-chat.example.com/;group-id=1234

Security Considerations

Several of the new properties or parameters defined by this specification allow reference to "external" URIs. Care MUST be taken when accessing data at external URIs as malicious content could be present. Clients SHOULD ensure that suitable permission is granted by calendar users before such URIs are dereferenced.

The "REFRESH-INTERVAL" property could be used by an attacker to make a client carry out rapid requests to the server hosting the calendar by specifying a very short duration (e.g., one second). This could lead to resource consumption on the client or server and to denial- of-service attacks against the server. Clients MUST ensure that they throttle requests to the server to a reasonable rate. In most cases, updating a public calendar once per day would suffice. If the "REFRESH-INTERVAL" is any less than that, clients SHOULD warn the calendar user and allow them to override it with a longer value.

The "CONFERENCE" property can include a "FEATURE" property parameter with a "MODERATOR" value. In some cases, the access code used by the owner/initiator of a conference might be private to an individual, and clients and servers MUST ensure that such properties are not sent to attendees of a scheduled component.

Both the "COLOR" and "IMAGE" properties are likely to be used by calendar users to express their own personal view of the calendar data. In addition, these properties could be used by attackers to produce a confusing display in a calendar user agent. When such properties are encountered in calendar data that has come from other calendar users (e.g., via a scheduling message, "public" calendar subscription, etc.), it is advisable for the client to give the receiving calendar user the option to remove (or adjust) these properties as the data is imported into their calendar system.

This specification changes the recommendations on how "UID" property values are constructed to minimize leaking any information that might be security sensitive.

Security considerations in RFC5545 and RFC5546 MUST also be adhered to.

Privacy Considerations

Several of the new properties or parameters defined by this specification allow reference to "external" URIs. Access to those URIs could be tracked, leading to loss of privacy. Clients SHOULD ensure that suitable permission is granted by calendar users before such URIs are dereferenced. In particular, calendar publishers

wishing to help protect the privacy of their subscribers MUST use HTTP with Transport Layer Security RFC7230 ("https:" URIs instead of "http:" URIs) for access to calendar data or ancillary data such as images.

In general, for their own privacy protection, users have to rely on the privacy policies of any conferencing system being accessed via the "CONFERENCE" property. It is entirely possible for such systems to uniquely identify and log the activity and participation (or lack thereof) of calendar users in the conference. Calendar user agents SHOULD track which conferencing systems are used and warn users the first time a new one is about to be used. This is particularly important if the client automatically "dials in" to the conference when the event start time occurs.

By giving different calendar users different values for the "REFRESH- INTERVAL" property, it is possible for a publisher of calendar data to uniquely identify each refresh from each calendar users' clients and thereby track user activity and IP address over time. To address this, clients SHOULD add or subtract some random amount of time from the published "REFRESH-INTERVAL" value when doing actual refreshes.

This specification changes the recommendations on how "UID" property values are constructed to minimize leaking any information that might be privacy sensitive.

Privacy considerations in RFC5545 and RFC5546 MUST also be adhered to.

IANA Considerations

Property Registrations

This document defines the following new iCalendar properties. IANA has registered the new properties in the "Properties" registry defined in Section 8.3.2 of RFC5545. IANA has also added a reference to this document where the properties originally defined in RFC 5545 have been updated by this document.

+------------------+---------+--------------------------------------+ | Property | Status | Reference | +------------------+---------+--------------------------------------+ | NAME | Current | RFC 7986, Section 5.1 | | DESCRIPTION | Current | RFC 5545, Section 3.8.1.5; RFC 7986, | | | | Section 5.2 | | UID | Current | RFC 5545, Section 3.8.4.7; RFC 7986, | | | | Section 5.3 | | LAST-MODIFIED | Current | RFC 5545, Section 3.8.7.3 RFC 7986, | | | | Section 5.4 | | URL | Current | RFC 5545, Section 3.8.4.6; RFC 7986, | | | | Section 5.5 | | CATEGORIES | Current | RFC 5545, Section 3.8.1.2; RFC 7986, | | | | Section 5.6 | | REFRESH-INTERVAL | Current | RFC 7986, Section 5.7 | | SOURCE | Current | RFC 7986, Section 5.8 | | COLOR | Current | RFC 7986, Section 5.9 | | IMAGE | Current | RFC 7986, Section 5.10 | | CONFERENCE | Current | RFC 7986, Section 5.11 | +------------------+---------+--------------------------------------+

Parameter Registrations

This document defines the following new iCalendar property parameters. IANA has registered these in the "Parameters" registry defined in Section 8.3.3 of RFC5545.

     +--------------------+---------+-----------------------+
     | Property Parameter | Status  | Reference             |
     +--------------------+---------+-----------------------+
     | DISPLAY            | Current | RFC 7986, Section 6.1 |
     | EMAIL              | Current | RFC 7986, Section 6.2 |
     | FEATURE            | Current | RFC 7986, Section 6.3 |
     | LABEL              | Current | RFC 7986, Section 6.4 |
     +--------------------+---------+-----------------------+

Property Parameter Value Registries

IANA has created two new registries for iCalendar elements: the "Display Types" registry and the "Feature Types" registry. Additional codes MAY be used, provided the process and template described in Sections 8.2.1 and 8.2.6 of RFC5545 are used to register them.

Display Types Registry

The following table has been used to initialize the "Display Types" registry.

        +--------------+---------+-----------------------+
        | Display Type | Status  | Reference             |
        +--------------+---------+-----------------------+
        | BADGE        | Current | RFC 7986, Section 6.1 |
        | GRAPHIC      | Current | RFC 7986, Section 6.1 |
        | FULLSIZE     | Current | RFC 7986, Section 6.1 |
        | THUMBNAIL    | Current | RFC 7986, Section 6.1 |
        +--------------+---------+-----------------------+

Feature Types Registry

The following table has been used to initialize the "Feature Types" registry.

        +--------------+---------+-----------------------+
        | Feature Type | Status  | Reference             |
        +--------------+---------+-----------------------+
        | AUDIO        | Current | RFC 7986, Section 6.3 |
        | CHAT         | Current | RFC 7986, Section 6.3 |
        | FEED         | Current | RFC 7986, Section 6.3 |
        | MODERATOR    | Current | RFC 7986, Section 6.3 |
        | PHONE        | Current | RFC 7986, Section 6.3 |
        | SCREEN       | Current | RFC 7986, Section 6.3 |
        | VIDEO        | Current | RFC 7986, Section 6.3 |
        +--------------+---------+-----------------------+

10. References

10.1. Normative References

RFC2119 Bradner, S., "Key words for use in RFCs to Indicate

          Requirement Levels", BCP 14, RFC 2119,
          DOI 10.17487/RFC2119, March 1997,
          <http://www.rfc-editor.org/info/rfc2119>.

RFC4122 Leach, P., Mealling, M., and R. Salz, "A Universally

          Unique IDentifier (UUID) URN Namespace", RFC 4122,
          DOI 10.17487/RFC4122, July 2005,
          <http://www.rfc-editor.org/info/rfc4122>.

RFC5234 Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax

          Specifications: ABNF", STD 68, RFC 5234,
          DOI 10.17487/RFC5234, January 2008,
          <http://www.rfc-editor.org/info/rfc5234>.

RFC5545 Desruisseaux, B., Ed., "Internet Calendaring and

          Scheduling Core Object Specification (iCalendar)",
          RFC 5545, DOI 10.17487/RFC5545, September 2009,
          <http://www.rfc-editor.org/info/rfc5545>.

RFC5546 Daboo, C., Ed., "iCalendar Transport-Independent

          Interoperability Protocol (iTIP)", RFC 5546,
          DOI 10.17487/RFC5546, December 2009,
          <http://www.rfc-editor.org/info/rfc5546>.

[W3C.REC-css3-color-20110607]

          Celik, T., Lilley, C., and D. Baron, "CSS Color Module
          Level 3", World Wide Web Consortium Recommendation
          REC-css3-color-20110607, June 2011,
          <https://www.w3.org/TR/2011/REC-css3-color-20110607>.

10.2. Informative References

RFC2397 Masinter, L., "The "data" URL scheme", RFC 2397,

          DOI 10.17487/RFC2397, August 1998,
          <http://www.rfc-editor.org/info/rfc2397>.

RFC3261 Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,

          A., Peterson, J., Sparks, R., Handley, M., and E.
          Schooler, "SIP: Session Initiation Protocol", RFC 3261,
          DOI 10.17487/RFC3261, June 2002,
          <http://www.rfc-editor.org/info/rfc3261>.

RFC3966 Schulzrinne, H., "The tel URI for Telephone Numbers",

          RFC 3966, DOI 10.17487/RFC3966, December 2004,
          <http://www.rfc-editor.org/info/rfc3966>.

RFC5122 Saint-Andre, P., "Internationalized Resource Identifiers

          (IRIs) and Uniform Resource Identifiers (URIs) for the
          Extensible Messaging and Presence Protocol (XMPP)",
          RFC 5122, DOI 10.17487/RFC5122, February 2008,
          <http://www.rfc-editor.org/info/rfc5122>.

RFC7230 Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer

          Protocol (HTTP/1.1): Message Syntax and Routing",
          RFC 7230, DOI 10.17487/RFC7230, June 2014,
          <http://www.rfc-editor.org/info/rfc7230>.

Acknowledgments

Thanks to the following individuals for feedback: Bernard Desruisseaux, Mike Douglass, Lucia Fedorova, Ken Murchison, Arnaud Quillaud, and Dave Thewlis.

This specification came about via discussions at the Calendaring and Scheduling Consortium.

Author's Address

Cyrus Daboo Apple Inc. 1 Infinite Loop Cupertino, CA 95014 United States of America

Email: [email protected] URI: http://www.apple.com/